OfficeSource CPSOHP User manual

OFFICE FURNITURE
MODEL NO. CPSOHP
OFFICESOURCE.COM Last Updated: 4/2022
ASSEMBLY INSTRUCTIONS
Before assembly, please remove all parts from the carton, verifying that you have the correct quantities, and read all the instructions.
®
ASSEMBLY INSTRUCTIONS
MODEL: CPSOHP
ASSEMBLY INSTRUCTIONS
1 of 4
!ATTENTION !
Ensure all bolts and screws are tightened, check bolts and screws every 6 months.
If any parts are missing, broken, damaged or worn, stop use of product until repairs have been made using factory authorized parts.
Failure to follow these warnings may result in injury.
Last Updated: 02/2021
®

OFFICE FURNITURE
MODEL NO. CPSOHP
OFFICESOURCE.COM Last Updated: 4/2022
ASSEMBLY INSTRUCTIONS
Before assembly, please remove all parts from the carton, verifying that you have the correct quantities, and read all the instructions.
2 of 4
®
ASSEMBLY INSTRUCTIONS
MODEL: CPSOHP
Parts List
No. Name Drawing QTY
aCase 1
bShelf 1
cBag Hook 1
dPocket 1
eScrew 5x16 6
a
Place the Shelf in the middle of the Case.
Hang the Bag Hooks & Pockets on long-shape holes in the Case.
b
c
d
Shelf、Hook、Pocket
Last Updated: 02/2021
®

OFFICE FURNITURE
MODEL NO. CPSOHP
OFFICESOURCE.COM Last Updated: 4/2022
ASSEMBLY INSTRUCTIONS
Before assembly, please remove all parts from the carton, verifying that you have the correct quantities, and read all the instructions.
3 of 4
®
ASSEMBLY INSTRUCTIONS
MODEL: CPSOHP
Parts List
No. Name Drawing QTY
fDoor 1
gTop Pivot Hinge 1
hBottom Pivot Hinge 1
iAir Bumper 1
jLock Set 1
kSpacer 2
lScrew 5x4 4
m Screw 3x8 4
First use 2.5 mm-size hexagon wrench to
lock Set Screw into Pivot Hinge.
Than insert Spacer on Pivot Hinge.
Finally, insert the Door and screw up tight. Detail A
Door
f
g
h
i
k
k
m
l
j
l
A
j
Last Updated: 02/2021
®

OFFICE FURNITURE
MODEL NO. CPSOHP
OFFICESOURCE.COM Last Updated: 4/2022
ASSEMBLY INSTRUCTIONS
Before assembly, please remove all parts from the carton, verifying that you have the correct quantities, and read all the instructions.
4 of 4
®
ASSEMBLY INSTRUCTIONS
MODEL: CPSOHP
!ATTENTION !
Ensure all bolts and screws are tightened, check bolts and screws every 6 months.
If any parts are missing, broken, damaged or worn, stop use of product until repairs have been made using factory authorized parts.
Failure to follow these warnings may result in injury.
e
Place the Hanging Cabinet upside down
on the bottom side of the table top.
Last Updated: 02/2021
®