OfficeSource PL25071SH User manual

OFFICE FURNITURE
MODEL NO. PL25071SH
OFFICESOURCE.COM Last Updated: 6/2022
ASSEMBLY INSTRUCTIONS
Remove all wrapping materials, including staples & packing straps before you start to assemble.
Check to be sure that you have all parts and hardware.
Keep all hardware parts out of reach of children.
Do not tighten all screws/bolts until all completely assembled.
IMPORTANT NOTE :
Z:\Office Furniture\ECONOWISE\OLD\Performance_logo.jpg
PAGE 1 OF 2
REV. 1
ASSEMBLY INSTRUCTION FOR OPEN HUTCH CABINET
COMPONENTS
HARDWARE
Place all wooden parts on a clean, smooth surface to prevent the parts from being scratched.
12 3
M4 x 65
Allen-Key
1 Pc
4 5 6
Klix Cam
8 Pcs
Cam Lock
8 Pcs
6 Hole
L-Bracket
4 Pcs
Screw
#6 x 58"
24 Pcs
KLIX CAM INSTRUCTIONS
Insert the cam with the arrow
pointing towards the hole in the
edge.
Line up Cam Lock,
turn clockwise.
1 2
Insert the Cam Lock into Klix
Cam. Turn Klix Cam to lock.
3
LEFT
RIGHT
B
C
C
A
A
PL 250XXSH_AI
Housing
Cap (Long)
8 Pcs
LEFT RIGHT
C
PL250OH
(Sold Separately)
+
A
Shelf Panel
2Pcs
Front Rail
2Pcs
B
B
ASSEMBLY INSTRUCTIONS
MODEL: PL25071SH
1 of 2.
Before assembly, please remove all parts from the carton, verifying that you have the correct quantities, and read all the instructions.
IN THE CARTON:
®

OFFICE FURNITURE
MODEL NO. PL25071SH
OFFICESOURCE.COM Last Updated: 6/2022
ASSEMBLY INSTRUCTIONS
INSTRUCTIONS:
ASSEMBLY INSTRUCTIONS
MODEL: PL25071SH
2 of 2.
!ATTENTION !
Place all wooden parts on a clean, smooth surface to prevent them from being scratched.
Check to be sure that you have all parts and hardware. Remove all wrapping materials, including staples and packing straps before
you start to assemble. Do not tighten all screws/bolts until all completely assembled. Keep all hardware parts out of reach of children.
If any parts are missing, broken, damaged or worn, stop use of product until repairs have been made using factory authorized parts.
Failure to follow these warnings may result in injury.
Z:\Office Furniture\ECONOWISE\OLD\Performance_logo.jpg
PAGE 2 OF 2
1
REV. 1
Attach Shelf Panel (I) by using Cam Lock (1) and Klix Cam (2).
54
B
A
C
B
A
A
Attach L-Bracket (4) to Shelf Panel (A) & (B)
as shown. Tighten Screws (5) securely.
ASSEMBLY INSTRUCTION FOR OPEN HUTCH CABINET
PL 250XXSH_AI
LEFT
RIGHT
C
C
A
A
B
C
2
Peel Double Sided Foam
Tape and Mount it on
Table Top.
C
B
B
®