OfficeSource PL2013 User manual

6 Hole
L-Bracket
3 Pcs
F
E
C
BD
A
Bottom Panel Adjustable Shelf-1 Back Panel Front Rail Side Panel x 2
Housing Cap (Long)
8 Pcs
8
Cam Lock
10 Pcs
Klix Cam
10 Pcs
11
Iron Shelf Support
4 Pcs
7
2 3
JCBC Screw
M6 x 40mm = 4pcs
14
Washer = 8pcs
9
4 5
M4 x 65
Allen-Key
1 Pc
Hanging Panel x 2
Adjustable
Glide
4 Pcs
Screw
#6 x 5/8"
18 Pcs
Housing Cap (Short)
2 Pcs
10
6
11
Wire Cap
1 Pc
1 OF 2
Before assembly, please remove all parts from carton, verifying that you have the correct quantities, and read all the instructions.
IN THE CARTON:
COMPONENTS
HARDWARE
Insert the cam with the arrow
pointing towards the hole in
the edge.
Line up Cam Lock,
turn clockwise.
1 2
Insert the Cam Lock into Klix
Cam. Turn Klix Cam to lock.
3
KLIX CAM INSTRUCTIONS
MODEL: PL 2013
ASSEMBLY INSTRUCTIONS
12
ALLEN CAP
Screw
M10 x 70MM
4 Pcs
13
SQUARE
PLATE 2 Pcs
Adjustable
Glide BIG
1 Pc
14 16
Screw
3.5X16MM
8 Pcs
G
Adjustable Shelf-2
15
M10
Allen-Key
1 Pc
E
B
G
OR
A
D
E
F
®
Last Updated: 02/2021
MODEL NO. PL2013
OFFICESOURCE.COM
ASSEMBLY INSTRUCTIONS
Last Updated: 3/2023

Attach the another Side Panel (E) to Hanging Panel
(F) and Back Panel (C) and Bottom Panel (A) by
using Cam Lock (1) and Klix Cam (2).
Attach the Bottom Panel (A) and Hanging
Panel (F) and Back Panel (C) to Side Panel
(E) by using Cam Lock (1) and Klix Cam (2).
A
E
C
F
F
A
EC
E
F
F
Attach the Front Rail (D) to Both
Side Panel (E) by wood dowel.
AE
E
C
F
F
D
TOP
Screw Adjustable Glides (5) into
bottom of Side Panel (E) and
Adjustable Glide BIG (14) into
Bottom Panel(A).
5
Attach the L-Bracket (8) on
the Front Rail (D) and
Bottom Panel (A) and both
Side Panel (E).
8
7
E
E
A
C
F
F
D
E
AE
EC
F
F
D
B
6
E
3
Attach Housing Cap (3/4) to all Klix Cams (2)
by pushing neck thought center of cam.
4
&
1 2
34
56
11
C
2 OF 2
Before assembly, please remove all parts from carton, verifying that you have the correct quantities, and read all the instructions.
INSTRUCTION:
MODEL: PL 2013
ASSEMBLY INSTRUCTIONS
2 OF 2
! ATTENTION !
Place all wooden parts on a clean, smooth surface to prevent them from being scratched.
Check to be sure that you have all parts and hardware. Remove all wrapping materials, including staples and packing straps before you start
to assemble. Do not tighten all screws/bolts until all completely assembled. Keep all hardware parts out of reach of children. If any parts are
missing, broken, damaged or worn, stop use of product until repairs have been made using factory authorized parts. Failure to follow these
warnings may result in injury.
Attach the Support Pin (6) to Both
Side Panel (E) & insert Shelf
Panel(B)or(G) as shwon.
Attach the Wire cap (11) to Back
panel (c) as shwon.
A
®
Last Updated: 02/2021
MODEL NO. PL2013
OFFICESOURCE.COM
ASSEMBLY INSTRUCTIONS
Last Updated: 3/2023