OfficeSource PL133 User manual

OFFICE FURNITURE
MODEL NO. PL133
OFFICESOURCE.COM Last Updated: 6/2022
ASSEMBLY INSTRUCTIONS
Insert the cam with the arrow
pointing towards the hole in the
edge.
Line up Cam Lock,
turn clockwise.
1 2
Insert the Cam Lock into Klix
Cam. Turn Klix Cam to lock.
3
Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from
Remove all wrapping materials, including staples & packing straps before you start to assemble.
Check to be sure that you have all parts and hardware.
Keep all hardware parts out of reach of children.
Do not tighten all screws/bolts until all completely assembled.
being scratched.
IMPORTANT NOTE :
Housing
Cap (S)
7 Pcs
6 Hole
L-Bracket
5 Pcs
Cam Lock
11 Pcs
System 5
KD Fitting
3 Pcs
Adjustable
Glide
3 Pcs
JCBC
M6 x 15mm
4 Pcs
Center Panel
DCBA
Top Panel
KLIX CAM INSTRUCTIONS
Side Panel End Panel
Screw
M3.5 x 16mm
4 Pcs
78
Klix Cam
14 Pcs
9
E
Metal Leg
Please follow these instructions for easy assembly.
1 2
Housing
Cap (L)
7 Pcs
345 6
PORK CHOP BULLET
PL 133 L/R ATMGG
10
M4 x 65
Allen-Key
1 Pc
Screw
#6 x 58"
30 Pcs
PAGE 1 OF 2
®

OFFICE FURNITURE
MODEL NO. PL133
OFFICESOURCE.COM Last Updated: 6/2022
ASSEMBLY INSTRUCTIONS
Screw Adjustable Glide (5)
into bottom of Side Panel
(B) and End Panel (C).
Attach the L-Bracket (6) to Side
Panel (B), End Panel (C) and
Center Panel (D) as shown.
Tighten Screws (7) securely.
4
Attach Housing Cap (4) to all Klix
Cam(3) by pushing neck thought
center of cam.
Attach the Metal Leg (D)
to Top Panel (A) by using
JCBC Screws (10).
5
4
5
Attach the body to Top Panel (A) by using
Cam Lock (1) and Klix Cam (3).
A
6
B
Attach the Center Panel (D) and End
Panel (C) to Side Panel (B) by using
Cam Lock (1) and Klix Cam (3).
3
7
C
1
Attach the Metal Leg (E) to Center Panel (D) by using
System 5 KD Fitting (2) and Klix Cam (3).
B
CD
9
D
CD
B
8
Secure Metal Leg (E) with
Screws (9).
2
8
PL 133 L/R ATMGG
PORK CHOP BULLET
PAGE 2 OF 2
®