OHAUS MB95 User manual

Quick Start Guide MB95
Ohaus Corporation www.ohaus.com i MB95 Moisture Analyzers Quick Start Guide
ASSEMBLY
CONTROLS
Turns On or Off display and fan.
When pressed, sends Print command.
When pressed, either starts or stops the
drying process.
When pressed, performs Tare function.
Leveling indicator
Leveling
Feet
Used to level the Moisture Analyzer.
MAKING A SIMPLE MEASUREMENT
Use one of the included absorbent glass fiber pads as a sample to become familiar with the instrument and the
various displays.
If the display is not visible and the unit is plugged into a power source, press
the On/Off button.
Directly start a measurement.
Open the cover on the Moisture Analyzer.
Clean the pan.
Place the pan handle in the sample chamber. Ensure that the tongue of the
pan handle fits exactly in the slot of the draft shield element.
Place the empty sample pan and glass fiber pan in the pan handle. The
sample pan must lie flat in the pan handle.
Note: It is advisable for you to work with the pan handle at all times. The pan
handle is ergonomic, safe and provides protection against possible burns due
to a hot sample pan.
Close the cover. This sets the Moisture Analyzer to zero automatically.
Open the cover on the Moisture Analyzer.
Wet the glass fiber pan with a 0.5 to 1 gram of water.
Note: Minimum sample size must be greater than 0.5 gram.
Starting the test
Close the cover, the Moisture Analyzer starts the drying and measurement
process automatically.
Tray Pan
Leveling
Feet
Leveling
Indicator
Draft Shield
Pan Support
Pan Handle
Sample Pan

MB95 Quick Start Guide
MB95 Moisture Analyzers Quick Start Guide ii Ohaus Corporation www.ohaus.com
Drying and measurement
You are now able to follow the progress of the drying cycle on the display.
This first display comes up automatically when the test was started.
Observing the test progress
There are five displays available when the Moisture Analyzer is running a test.
(Showing %MC, %DC, g, %RG or a curve. )
When pressing the data area while %MC is shown, the display will cycle
through each of the five displays.
The display indicates the Method Name, Temperature/Time, actual
temperature, elapsed time duration of the test, moisture and curve.
The test automatically stops at the end of the measurement.
If you want to end the test sooner, press the button.
Congratulations! You have just performed your first measurement with your
moisture analyzer.
Carefully remove the sample pan handle from the drying area.
WARNING: As the pan and sample may still be hot, you should let these
cool down before removing the pan from the pan handle!
Edit default method
The analyzer comes with a default method preinstalled. The settings of the
default method are shown on the display. To edit the settings, press on the
area where the settings are displayed as shown to the left.
Press the setting items to edit them.
Please see the instruction manual for more details.
*30566026*
P/N 30566026A
MB95 Instruction Manual:
http://dmx.ohaus.com/WorkArea/showcontent.aspx?id=
4294998388
For the full instruction manual, please scan the QR code or click
the link below: