OHP OBD2 User manual

OHP WIFI DEVICE - INSTALLATION GUIDE
There are two ways to use and connect the OHP OBD2 WiFi device to your vehicle, one is
to connect it via desktop/laptop/tablet Windows computer and the other one is via
iPhone/Android phone. Below are the steps on how to install the device:
I - Via Desktop/Laptop/Tablet Windows Computers
1. Plug the device into your vehicle's OBDII port.
2. Check for new WiFi networks, then connect to WiFi OBDII network.

3. Download the FORScan software here: https://forscan.org/download.html. Then install it
on your computer.
4. Open the FORScan software.
5. Go to Settings and select WiFi under the Connection tab. Make sure to check the
Auto-connect box.

6. All set. You are good to go.

II - Via iPhones and Android Phones
1. Plug the device into your OBDII port.
2. Open Phone settings, check for new Wifi networks, then connect to WiFi OBDII network.

3. Download and install the FORScan Lite phone app. Download the app at Google Play Store
for Android users and at the App Store for iOS users.

4. Open FORScan Lite phone app.

5. Using the FORScan Lite phone app, push connect to the vehicle.

6. All set. You are good to go.
*Note: You CANNOT apply configurations, programming functions, and some service
procedures using FORScan Lite. Use the FORScan software instead using Windows laptop,
desktop computer, or tablet if you wish to do so.