OHP OBD2 User manual

OHP BLUETOOTH DEVICE - INSTALLATION GUIDE
There are two ways to use and connect the OHP OBD2 Bluetooth device to your vehicle,
one is to connect it via desktop/laptop/tablet Windows computer and the other one is via
Android phone. Below are the steps on how to install the device:
I - Via Desktop/Laptop/Tablet Windows Computers
1. Plug the device into your vehicle's OBDII port.
2. Turn on the Bluetooth on your desktop/laptop/tablet Windows computer. Search and
connect to available Bluetooth signal from the OBD2 device.
3. Download the FORScan software here: https://forscan.org/download.html. Then install it
on your computer.
4. Open the FORScan software.

5. Go to Settings and select Bluetooth under the Connection tab. Make sure to check the
Auto-connect box.
6. All set. You are good to go.

II - Via Android Phones
1. Plug the device into your OBDII port.
2. Open Phone settings, turn on Bluetooth and check and connect to available Bluetooth
network from the OBD2 device.
3. Download and install the FORScan Lite phone app. Download the app at Google Play Store.

4. Open FORScan Lite phone app.

5. Using the FORScan Lite phone app, push connect to the vehicle.

6. All set. You are good to go.
*Note: You CANNOT apply configurations, programming functions, and some service
procedures using FORScan Lite. Use the FORScan software instead of using Windows laptop,
desktop computer, or tablet if you wish to do so.