OLDE MIDWAY PRO12 User manual

INSTRUCTION
MANUAL
PRO12
PRO18
PRO24
PRO30
Hot Dog Roller

WARNING
Misuse of this machine may result in serious injury or death.
SPECIFICATIONS
Model Temperature Power
PRO120-500 ° F 700 Watt
PRO18 0-500 ° F 900 Watt
PRO24 0-500 ° F 1200 Watt
PRO30 0-500° F 1400 Watt
Rollers
5
7
9
11
Electric Voltage
110V
110V
110V
110V
READ ALL INSTRUCTIONS BEFORE USING YOUR HOT DOG ROLLER.
RETAIN TH IS MANUAL FOR FUTURE REFERENCE.
• This hot dog roller is not a toy. Please keep away from children. This machine should not be
operated by anyone under the age of 18.
• Do not use machine for anything other than its intended purpose. This machine should
never be modified.
• Make sure machine is plugged into a grounded outlet with appropriate electrical supply.
Always make sure the wall outlet being used is properly grounded.
• Take proper safety precautions when using this machine.
• Do not touch moving parts. Keep body, hair, jewelry, clothing, etc. away from machine
when in use.
• Use only 3-prong grounded extension cords that meet or exceed the electrical rating.
• Always switch POWER OFF on machine before unplugging from outlet.
• Always use controls to operate. Allow hot parts to cool down before moving or cleaning.
• Always place machine on a secure, level, and stable surface.
• This is a freestanding machine and should not be placed in a built-in or recessed area.
• To avoid any risk of electrical shock, do not immerse cord or plug in water.
• Do not place on top of cloth or fabric materials.
• DO NOT CLEAN WITH DETERGENT OR ABRASIVE CLEANERS. DO NOT IMMERSE IN WATER.

PARTS & WIRING DIAGRAM
Glass Shield Parts List
Hot Dog Roller Components
Circuit Diagram

INSPECT ALL COMPONENTS BEFORE USE.
DO NOT ATTEMPT TO USE THE HOTDOG ROLLER
MACHINE IF ANY PARTS ARE DAMAGED OR MISSING.
ASSEMBLY INSTRUCTIONS
** ATTACHING GLASS COVER **
Skip to Operating Instructions if Hot Dog Roller DOES NOT have a glass cover.
STEP 1:
Locate and remove the pair of screws on the inner left and right sides of the roller base
and set aside.
STEP 2:
Position the back glass mount onto the roller base. Reinsert the screws removed in STEP
1 and hand-tighten, as it may need to be adjusted. Repeat for the remaining 3 mounts.
STEP 3:
Insert one of the small side glass panels into both the front and back mounts on one side
of the machine with the curved side of the glass facing the back (away from the
controls). If needed, adjust mounts by sliding forward or backward until the glass is
snug; tighten to secure. Repeat for the other side.
STEP 4:
Place the large curved glass shield into the back mounts pushing gently all the way down
into the channel. Check to make sure the edges of the top and side glass pieces are flush.
STEP 5:
Place the stainless steel trim plate over the edge of the top glass, aligning the holes with
the glass.
STEP 6:
Insert a bolt through the trim plate and glass, then secure with nut. DO NOT
OVERTIGHTEN, as this may crack the glass.

PRO12 (5rollers) FRONT dial controls front 3rollers - BACK dial controls the rear 2
PRO18 (7 rollers) FRONT dial controls front 4 rollers - BACK dial controls the rear 3
PRO24 (9 rollers) FRONT dial controls front 5 rollers - BACK dial controls the rear 4
PRO30 (11 rollers) FRONT dial controls front 6 rollers - BACK dial controls the rear 5
PRO12 – Maximum 12 hot dogs
PRO18 – Maximum 18 hot dogs
PRO24 – Maximum 24 hot dogs
PRO30 – Maximum 30 hot dogs
OPERATING INSTRUCTIONS
STEP 1:
Before the first use, apply a small amount of vegetable oil onto the surface of the
rollers. Press the Power Switch ON. The indicator light will glow when the machine has
power and will turn off when the temperature has been reached.
NOTE: The machine will become hot very quickly.
STEP 2:
Adjust the temperature controllers, FRONT and BACK.
We recommend lower temperatures until you understand the cooking times.
STEP 3:
ATTENTION: Rollers are HOT - DO NOT TOUCH!
Place hot dogs between the rollers using tongs
or other utensil. Do not use your hands.
STEP 4:
After approximately 15 minutes the hot dogs should be ready to eat. Cook times may
vary depending on cooking temperature, thickness of the hot dogs, and starting
temperature (frozen hot dogs may take longer).
STEP 5:
Remove the hot dogs using tongs or other utensil. Do not use your hands.
STEP 6:
Press the Power Switch OFF.
STEP 7:
Unplug from wall outlet. Allow to cool completely before touching or cleaning.

CLEANING & MAINTENANCE
It is recommended that the hot dog roller be cleaned after each use.
• Make sure the machine is turned OFF and it is unplugged.
• Allow the machine to cool completely.
• Do not immerse the cord, plug or any part of the machine in water or other liquid.
• Wipe down rollers and removable drip tray with a damp soft cloth. Do not
submerge machine in water or spray water into the machine.
• NEVER USE STEEL WOOL TO CLEAN THE MACHINE, THIS WILL SCRATCH THE
SURFACES. Do not use abrasive cleaning agents or chemicals on any part of the
machine.
• A food safe glass cleaner can be used to clean the glass.
• After cleaning, dry with a soft cloth. Make sure the unit is completely dry before
using again or storing.
Olde Midway features a full line of concession equipment and accessories.
O/deMidway.com