Omcan JE-ES-0028P-BB User manual

Juice Extractors
Models JE-ES-0028N-T, 0028N-BB, 0028P-BB, 0028N-F, 0045N-B
Items 47959, 47960, 48009, 47989, 47990
Instruction Manual
Revised - 12/27/2023
Toll Free: 1-800-465-0234
Fax: [phone]
Email: [email protected]
www.omcan.com

2
Page
--------------------------------------------------------------------------- 3 - 4
--------------------------------------------------------------------------- 4 - 6
-------------------------------------------------------------------------- 7
--------------------------------------------------------------------------------------- 7 - 8
--------------------------------------------------------------------------------------- 8 - 10
--------------------------------------------------------------------------------- 10 - 12
----------------------------------------------------------------------------- 13 - 14
---------------------------------------------------------------------------- 15 - 29
---------------------------------------------------------------------------- 30
---------------------------------------------------------------------------- 31
Table of Contents
Section
General Information
Safety and Warranty
Technical Specications
Installation
Operation
Maintenance
Troubleshooting
Parts Breakdown
Electrical Schematics
Warranty Registration
Model JE-ES-0028N-T / Model JE-ES-0028N-BB / Model JE-ES-0028P-BB
Model JE-ES-0028N-F / Model JE-ES-0045N-B

3
General Information
Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan
and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or
negligent use of this equipment. The product shall only be operated by someone over the age of 18, of
sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct
operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the
machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of
the machine while in operation.
CHECK PACKAGE UPON ARRIVAL
Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the
external packaging, open carton to ensure all ordered items are within the box, and there is no concealed
damage to the machine. If the package has su󰀨ered rough handling, bumps or damage (visible or concealed),
please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may
initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be
lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse
for damaged products that were shipped collect or third party.
Before operating any equipment, always read and familiarize yourself with all operation and safety
instructions.
Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save
these instructions for future reference. Also save the original box and packaging for shipping the
equipment if servicing or returning of the machine is required.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et
Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne
ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de
plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour
utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication
de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine
ou des personnes à proximité de la machine pendant son fonctionnement.
VÉRIFIEZ LE COLIS DÈS RÉCEPTION
Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage
n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés
sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises
manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant
d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager
une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine
doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents
d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli
par un tiers transporteur.

4
General Information
Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations
et les consignes de sécurité.
Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces
instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour
l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba
Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona
inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona
mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido
entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada.
Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la
máquina mientras esta en el funcionamiento.
REVISE EL PAQUETE A SU LLEGADA
Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el
empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la
caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes
o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro
de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre
los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se
muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron
a recoger por terceros.
Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de
funcionamiento y seguridad.
Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para
salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el
envío del equipo si servicio técnico o devolución de la máquina que se requiere.
Safety and Warranty
WARNINGS
• It is the responsibility of the user to read the enclosed warnings prior to using this machine.
• This equipment is intended for commercial use in places such as o󰀩ces, stores, supermarkets, hotels,
bars, co󰀨ee shops.
• This device can be used by children aged 8 years and above and people with reduced physical, sensory
or mental abilities or lack of experience and knowledge, if they have been given appropriate supervision or

5
Safety and Warranty
training regarding the use of the device in a safe manner and understand the dangers involved. Children
should not play with the device. Cleaning and maintenance to be performed by the user should not be
carried out by children without supervision.
• This machine contains an equipotential terminal on the back for the connection of the grounding of
other devices to the grounding of your installation through this terminal. If used, loosen the nuts and
washers, place the ground wire of the auxiliary device and retighten the nuts and washers tightly. This
equipotentiality point is marked by the following symbol:
• After removing the packaging, check that the equipment is not damaged. If in doubt, do not use it and
contact the company.
• The packaging materials (plastic bags, foam, cork, etc.) should not be left within reach of children, as they
are a potential danger.
• Before assembling the machine, please, make sure there are no pieces left in the packaging.
• Be sure to comply with the regulations established for the treatment of waste. Separate them and deposit
them in the nearest containers or clean point to reduce the environmental impact of the purchase.
• The machine needs to have some ventilation around it in order to perform properly.
• Concerning models on a stand, remember to set the brakes on the front wheels in order to prevent
unwanted moving.
• Before use, clean the juicing area.
• DO NOT start the machine, without making sure that all components are in their correct place of work,
especially the front cover, otherwise the security detector will not allow the machine to run.
• When using the machine, do not touch or access to the moving parts neither by hands nor with any
utensils.
• The machine should never be operated by a minor or inexperienced sta󰀨 without supervision.
• Check that the voltage of your outlet is according to voltage stated in technical label on the side of your
machine. Only use power cords with grounding connection.
• Do not use an extension cord. If you decide to do it, it is on your own responsibility, use only extension that
is in good condition and suitable for the power of the machine. The extension cord should be placed so that
no one can pull it or stumble.
• Do not allow the cord to come into contact with hot surfaces.
• Do not put machine next to heat sources.
• To protect against risk of electrical shock and personal injury, do not immerse cord, plug or appliance in
water or any other liquid.
• This product is designed for indoor use, do not expose this appliance to rain or moisture and do not use it
outdoors or with wet hands.
• Do not use the machine out of the temperature range: from -20º to 40ºC.
• Always place the machine on a dry, stable and leveled surface.
• To disconnect from the electrical outlet pull the plug gently. Never pull from the cord.
• The use of accessories not recommended by the manufacturer may cause re, electric shock or injury.
Always use original spare parts.
THE PROPER SIZE OF FRUITS IN ORDER TO OBTAIN BEST RESULTS IS 65-80MM DIAMETER ,
EXCEPT FOR THE BIGBASIC AND BIGTOP, WHICH IS 75-90MM.
• It is recommended to wash the fruit before juice extraction.
• The manufacturer declines any responsibility for damages resulting from improper, careless or negligent
use of equipment, as well as from use by unauthorized persons.

6
Safety and Warranty
RESIDENTIAL USERS: vendor assumes no liability for parts or labor coverage for component failure
or other damages resulting from installation in non-commercial or residential applications. The right
is reserved to deny shipment for residential usage; if this occurs, you will be notied as soon as
possible.
1 YEAR PARTS AND LABOR WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized
service technician to repair the equipment locally.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
improper use.
Please see https://omcan.com/disclaimer for complete info.
WARNING:
The packaging components are classied as normal solid urban waste and can therefore be disposed of
without di󰀩culty.
In any case, for suitable recycling, we suggest disposing of the products separately (di󰀨erentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

7
Technical Specications
Installation
Model JE-ES-0028N-T JE-ES-0028N-BB JE-ES-0028P-BB JE-ES-0028N-F JE-ES-0045N-B
HP 0.75 HP / 560 W
Fruit Diameter 2.6” - 3.1”
65 - 80mm
3” - 3.7”
75 - 95mm
2.6” - 3.1”
65 - 80mm
Basket Capacity 55.1 lbs. / 25 kgs. 17.6 lbs. / 8 kgs. 55.1 lbs. / 25 kgs.
Peel Bucket 44.1 lbs. / 20 kgs.
Waste Bin
Capacity 39.7 lbs. / 18 kgs.
Production 28 fruits per minute 45 fruits per minute
Electrical 110-120V / 60Hz / 1
Current 9 / 8.6A 4.1 / 3.7A - 9 / 8.6A 9 / 8.6A 9 / 8.6A
Dimensions 19.7” x 24.4” x 38.2”
500 x 620 x 970mm
19.7” x 24.4” x 33”
500 x 620 x 838mm
19.7” x 24.4” x 38.2”
500 x 620 x 970mm
Weight 104.7 lbs. / 47.5 kgs. 93.9 lbs. / 42.6 kgs. 104.7 lbs. / 47.5 kgs.
Item Number 47959 47960 48009 47989 47990
1. Place the peel bucket in the right
place. Place the juice tray.
FOR THE TOP / FASTTOP / BIGTOP
2. Unscrew and remove the turning
feeder plate from the head.
3. Insert the feed basket, then the
turning feeder plate and screw the
assembly together.
SET UP OF THE STAND
DISPENSER STAND
1. Remove the juice tray and the dispenser kit from the trolley inside
the stand.
2. Place the tank on the supports of the dispenser kit. Place the drip
grid on the nipples of the stand door. Place the down tubes and the
trolley on the lower part of the bottom of the stand, as shown in the
drawing.

8
Operation
Installation
ELECTRONIC FUNCTIONING
TO ACTIVATE THE JUICER
1. Connect the juicer to a grounded outlet.
2. Activate the juicer by pressing the switch on the back of the juicer.
3. Feed citrus fruit through the feeder tube or into the top basket of the feeder.
4. Turn on the control display by pressing Start for 2 seconds.
CONTROL PANEL PARTS
1. Start button.
2. Stop button.
SET UP OF THE OPTIONS
STAINLESS STEEL SELF-TAP
1. Thread the stainless steel self-tap assembly to the support.
SELF-CLEANING SYSTEM
1. Connect the juicer to the water supply through the socket at the rear of the machine.
The connection must be made using a G 1/4” female thread. This system is prepared
to work between 1.5 and 3 bars of pressure.

9
Operation
3. Self-cleaning/home button.
4. Selector + button.
5. Selector - button.
6. Status area.
7. Voltage input.
8. Counter.
9. Functioning mode.
10. Selector.
MACHINE CONFIGURATION
1. To access settings menu; press and hold the self-cleaning/menu button for 2 seconds.
2. Select the option to congure; press the buttons + and - to move between congurable settings. Select a
setting to congure by pressing the self-cleaning/menu button.
CONFIGURATION SETTINGS
Peel basket capacity: select quantity of oranges to squeeze before a “full peel basket” warning is displayed.
If a 0 value is set, warning is not active.
Auto-o󰀨 time: by this setting user can congure the no operation time length before machine turns itself o󰀨
automatically. If a 0 value is set, auto-o󰀨 is not active.
Self-cleaning duration: select shower cycle duration (in seconds).
Auto/manual mode: select how to start and stop squeezing operation; automatic mode (by self or level
detection) or manual mode.
FUNCTIONING
STANDARD OPTION
1. Turn on the control display. Press and hold start for 2 seconds.
2. Select continuous or selector mode operation. Press + and - to set continuous or selector mode operation.
If = 0; continuous mode active.
If ≠ 0; selector mode active.
3. Start the squeezing process by pressing start.
4. The juicer will stop when stop is pressed or when the number of oranges indicated in the selector mode
has been squeezed.
STAINLESS STEEL SELF-TAP OPTION
1. Turn on the control display. Press and hold start for 2 seconds.
2. To start juicing, make sure that the juicer is in “ready” status (green LED on) and turn on the self-tap.
3. The machine will stop when the self-tap is closed, when the stop button is pressed, or when the number of
oranges indicated on the selector has been squeezed.

10
Operation
Maintenance
LEVEL DETECTOR OPTION
1. Turn on the control display. Press and hold start for 2 seconds.
2. Activate the level detector. Press the start button.
3. Start of squeezing. The machine will start the squeezing operation automatically when the tank level
detector detects that it is not at the “maximum level”.
4. End of squeezing. The machine will stop the squeezing operation when the tank level detector detects the
“maximum level” or when the stop button is pressed.
FURTHER FUNCTIONS
MAINTENANCE STOP
Maintenance stop activation. With machine in the “stop” status, press and hold the stop and home buttons
simultaneously and the machine will start turning until maintenance position is reached.
INVERTED TURN
Inverted turn activation. With the machine in the “stop” status, press and hold the start and stop buttons
simultaneously.
SELF-CLEANING OPTION (ONLY FOR MACHINES INCLUDING SELF-CLEANING OPTION)
IMPORTANT: to carry out the self-cleaning process, the amount of fruit in the feeder must not exceed 3
kgs.
To start washing*: make sure that there are no fruits inside squeezing area. To start washing press the home
button when the machine is running.
To nish washing: automatic shower will stop washing when cycle time is completed or when pressing the
home button again.
*The automatic feeder is equipped with a lock/stop system to stop the feeding of fruits. Use this system to lock
the feeding before proceeding to start the washing.
AUTOMATIC FILTER (ONLY FOR MACHINES INCLUDING AUTOMATIC FILTER OPTION)
To start ltering: the automatic lter displacement will start at the moment the squeezing process is initiated.
To nish ltering: lter displacement will stop 10 seconds after completion of the squeezing process.
Important: machine will immediately stop running if a warning signal is received.
CLEANING AND MAINTENANCE
The cleaning process is very important to keep the juicer in perfect condition. In order to perform a correct
cleaning, you must take into account the following guidelines:
• Do not allow the residues produced in the squeezing process to dry out.
• Do not allow the juice to solidify in the di󰀨erent elements that make up the squeezing system.
• Keep lters and squeezing elements free of pulp, seeds or rests of peels.

11
Maintenance
• Keep the waste bins empty and clean.
• Follow the specic cleaning steps below.
• It is recommended that the fruit be washed before being subjected to the squeezing process.
The self-cleaning option allows a quick wash of the squeezing area, facilitating perfect hygiene and leaving
your juicer ready for the next squeezing process. It is recommended to perform a wash cycle at the end of the
juicing operation. If your juicer is equipped with the self-wash option, it is recommended to start a cycle before
proceeding to the manual cleaning.
The cleaning and maintenance process should be initiated once the squeezing process has been completed.
Activate the “MAINTENANCE STOP” function on the display and make sure that the males and drums of the
juicer are in the position shown in the following images.
Unplug the machine from the mains socket.
Remove the juice lter.
If your juicer has any option included, you must proceed to
disassemble the options prior to dissembling the juicer.
Empty the waste bins.
1. Remove the front cover by unscrewing the threaded
thumbscrews on the sides. Unscrew the central thumbscrew
that xes the screen and remove it as well.
2. Unscrew the four thumbscrews that x the drums and males of
the squeezing system. Remove the central blade by sliding it
forward.
ATTENTION! This part contains a cutting element. Handle
this part very carefully. Also remove the two squeezing
taps and the two drums by moving them forward.

12
Maintenance
3. Remove the feeding tube by sliding it forward.
4. For TOP, FASTTOP and BIGTOP juicers: unscrew the
thumbscrew securing the turning feeder plate and remove
the head and the feeding basket.
Clean all the parts perfectly, as well as the machine block with
water and detergent.
The parts, with the exception of the cover, can be put in the dishwasher at a maximum temperature of 40ºC.
Do not use abrasive products or solvents, as they could damage the compound of the elements of the juicer
system. Do not clean the juicer assembly using pressurized water. Dry the components of the squeezing
system and the machine block.
STAINLESS STEEL SELF-TAP
To ensure perfect hygiene of your juicer, it is essential to clean
the tap regularly.
1. Unscrew the knurled nut that connects the tap to the juicer.
2. Unscrew the knurled thread underneath the actuator.
Clean perfectly all the parts of the tap with water and detergent,
focusing on those areas with more relief with the help of a brush.
DISPENSER STAND
1. Remove the top cover of the dispenser by lifting it a few
millimeters and pulling it out horizontally.
2. Remove the lter and the shaker.
3. Unscrew the tap assembly from the coupling bracket.
Unscrew the inner reservoir nut and remove the nuts and
reservoir gasket.
4. Remove the dispenser support and uncouple the reservoir
by pressing upwards.
Clean all the parts perfectly, as well as the machine block with
water and detergent.
The parts, with the exception of the machine cover, the
dispenser base and the cover, can be put in the dishwasher at
a maximum temperature of 40ºC.
Do not use abrasive products or solvents, as they could damage the compound of the elements of the juicer
system. Do not clean the juicer assembly using pressurized water. Dry the components of the squeezing
system and the machine block.

13
Troubleshooting
FAILURE CAUSE SOLUTION
The machine does not operate. Machine unplugged. Plug it to socket.
No power. Check the plug and socket.
Transparent cover misplaced. Make sure it is well placed.
Defective safe detectors. Call customer service.
Defective ON/OFF button. Call customer service.
Defective electric circuit. Call customer service.
The machine is blocked while
squeezing is in progress.
Insu󰀩cient voltage. Check that the voltage is as
indicated on the identication label.
Wrong fruit size. Check the size of the fruit is as
shown in this manual.
The machine stops every few
minutes.
Insu󰀩cient ventilation. Check that ventilation gratings are
not covered.
Insu󰀩cient voltage. Check the voltage.
The positioner is broken or bent. Misplaced drum or positioner. Make sure the pieces are well
placed.
The tap is blocked. Juice has seeds or excessive pulp. Dissemble and clean the tap as
described in the manual.
Counter increases counts wrongly. Noise or perturbations in electric
supply.
Unplug and plug machine to
electric supply. If problem persists,
unplug the machine and plug again
after a few minutes.
WARNINGS AND EMERGENCY STOPS
Warning and emergency stops are situations that require user attention.
These situations can answer to following causes:
• User security and protection.
• Equipment protection against external factors.
• User attention is required to continue a sequenced operation.
• User attention is required due to machine maintenance.
Once a warning or emergency stop is reached, machine automatically stops and enters “warning” status. In
this status, a red LED over the “stop” button will light intermittently and the corresponding warning advice will
be displayed through screen:
WARNING CAUSE ACTIONS
Front cover is not correctly
assembled. Incorrect assembly of
the automatic lter (if applicable).
Tighten the fasteners that x the
cover to the machine casing.
Check the automatic lter
anchorage.

14
Troubleshooting
Maintenance stop reached. In case of cleaning, remove
juicers.
*Motor overheating. Check if any piece or part is
blocking or hindering machine turn.
Voltage input out of range. Check voltage supply.
Control fuse damaged. Replace fuse (10A) on control
board.
Full dispenser signal while
automatic shower function is being
executed.
Empty dispenser.
Orange peel cycle completed (peel
basket is full).
Empty peel basket.
*Every 10 minutes of non-stop operation of the machine takes about 15 minutes to reset the engine
temperature.
Important: to exit a “warning” state, it will be necessary to press the “stop” button. The machine will go to “stop”
status. If the machine does not exit the “warning” state when the “stop” button is pressed, it means that the
cause of the warning has not yet been resolved.

15
Parts Breakdown
Model JE-ES-0028N-T 47959
Model JE-ES-0028N-F 47989
Model JE-ES-0028N-B 47990

16
Parts Breakdown
Model JE-ES-0028N-T 47959
Model JE-ES-0028N-F 47989
Model JE-ES-0028N-B 47990

17
Parts Breakdown
Model JE-ES-0028N-T 47959
Model JE-ES-0028N-F 47989
Model JE-ES-0028N-B 47990

18
Parts Breakdown
Model JE-ES-0028N-T 47959
Model JE-ES-0028N-F 47989
Model JE-ES-0028N-B 47990

19
Parts Breakdown
Model JE-ES-0028N-T 47959
Model JE-ES-0028N-F 47989
Model JE-ES-0028N-B 47990

20
Parts Breakdown
Model JE-ES-0028N-T 47959
Model JE-ES-0028N-F 47989
Model JE-ES-0028N-B 47990
Item No. Description Position Item No. Description Position Item No. Description Position
AO256 Cover Screen Bal for 47959, 47989,
47990 00029 AP160 Rustless Screw for 47959, 47989, 47990 00172 64911 Juice Filter Big for 47959, 47989, 47990 00277
AO257 Cover Screen Right Lid for 47959,
47989, 47990 00030 72644 Washer H Zinc Din-125 D10 for 47959, 47989, 47990 00173 72534 Plastic Lid M4 for 47959, 47989, 47990 00285
AO258 Cover Screen Left Lid for 47959, 47989,
47990 00031 72522 Rustless Washer Din-125 D08 Inox for 47959, 47989, 47990 00174 72535 Plastic Lid M6 for 47959, 47989, 47990 00286
72502 Screw H M8x30 Zinc for 47959, 47989,
47990 00048 42173 Cotter H 8x7x70 for 47959, 47989, 47990 00175 40592 Female Thumbscrew M8 for 47959, 47989, 47990 00287
72504 Cotter H 8x7x15 for 47959, 47989, 47990 00065 72647 Rustless Cotter 8x7x50 for 47959, 47989,
47990 00177 72673 Reducer 14-160 R:1/28 for 47959, 47989, 47990 00294
72506 Rustless Cotter Inox 8x7x70 for 47959,
47989, 47990 00067 40590 Male Thumbscrew M8 for 47959, 47989, 47990 00178 64912 Reducer 14-160 R:1/20 for 47959, 47989, 47990 00295
72623 Screw H M6x55 for 47959, 47989, 47990 00068 64904 Screw H Zinc M8x20 for 47959, 47989,
47990 00179 72674 Baseplate for 47959, 47989, 47990 00300
72626 Screw H M6x10 for 47959, 47989, 47990 00077 72649 Screw H M8x50 for 47959, 47989, 47990 00180 43977 Upper Seal Protection Sup for 47959,
47989, 47990 00345
72627 Bearing 6004 for 47959, 47989, 47990 00081 72650 Rustless Screw M8x16 for 47959, 47989,
47990 00183 43978 Lower Seal Protection Inf for 47959, 47989, 47990 00346
72628 Bearing 6006 for 47959, 47989, 47990 00082 AO260 Washer H Zinc for 47959, 47989, 47990 00186 72679 Juice Tray BK for 47959, 47989, 47990 00370
AP159 Rustless Screw for 47959, 47989, 47990 00084 72651 Nut H Zinc M6 for 47959, 47989, 47990 00187 72680 Juice Tray BK Self for 47959, 47989,
47990 00371
72509 Rustless Screw M4x10 Inox for 47959,
47989, 47990 00086 64906 Nut H Zinc M8 for 47959, 47989, 47990 00188 72719 Reducer Shaft F-125 for 47959, 47989, 47990 00378
72630 Screen Rod M8 for 47959, 47989, 47990 00088 72653 Nut H Zinc M10 for 47959, 47989, 47990 00190 72564 Rustless Screw M6x12 Inox for 47959,
47989, 47990 00432
72631 Squeezer Male for 47959, 47989, 47990 00094 72654 Rubber Seal 30x40x06 for 47959, 47989,
47990 00196 72565 Rustless Washer Din-6798 D06 Inox for 47959, 47989, 47990 00436
72632 Squeezer Drum for 47959, 47989, 47990 00096 72655 Ejector Rod M12 for 47959, 47989, 47990 00199 AO262 Cable Clip for 47959, 47989, 47990 00459
72514 Ventilation Grid for 47959, 47989, 47990 00108 39699 Blade Ejector for 47959, 47989, 47990 00201 72691 Screw H Zinc M10x45 for 47959, 47989,
47990 00460
72635 Lower Rustless Shaft for 47959, 47989,
47990 00110 72657 DC Hose Fixing PG9 V-TEC 9GR for 47959, 47989, 47990 00211 72693 C Clip Din-471 E16 for 47959, 47989, 47990 00489
AK896 Upper Rustless Shaft for 47959, 47989,
47990 00112 64834 Plugging Cap Ø16mm Black for 47959, 47989, 47990 00212 AO263 Magnet for 47959, 47989, 47990 00509
72638 Sump Cover for 47959, 47989, 47990 00129 72659 Luggage-Rack 350x130 for 47959,
47989, 47990 00220 AP161 MB Down Tube Auto-F for 47959, 47989, 47990 00530
72639 Protect Juice Screen NA for 47959,
47989, 47990 00131 72661 Gear Feeder 1 Reduct for 47959, 47989, 47990 00224 72580 Rustless Screw M2.9x10 Inox for 47959, 47989, 47990 00541
72640 Tray 350x130 for 47959, 47989, 47990 00136 72662 Gear Feeder 2 Cabez for 47959, 47989,
47990 00225 72582 Rustless Screw M5x10 Inox for 47959, 47989, 47990 00555
40591 Female Thumbscrew M12 for 47959,
47989, 47990 00152 72533 Gear Feeder 3 Horiz for 47959, 47989, 47990 00226 AP162 Peel Bucket Base for 47959, 47989, 47990 00646
AO259 Magnet Cap for 47959, 47989, 47990 00167 AO261 Female Thumbscrew for 47959, 47989,
47990 00249 AP163 MB Down Tube P-Out I/I for 47959, 47989, 47990 00651
72520 C Clip Din 471 E-34 for 47959, 47989,
47990 00168 39695 Cover Screen for 47959, 47989, 47990 00265 64837 DC Shower Diffuser for 47959, 47989, 47990 00660
72521 Washer H D35-D09x3 Zinc for 47959,
47989, 47990 00171 40596 Juice Filter for 47959, 47989, 47990 00276 64838 DC Shower Diffuser Cap for 47959, 47989, 47990 00661