Omcan RS-CN-0120-5 User manual

Revised - 09/15/2021
Toll Free: 1-800-465-0234
Fax: [phone]
Email: [email protected]
www.omcan.com
Refrigerated Showcases
Models RS-CN-0120-5, 0160-5, 0202-5
Items 47107, 47278, 47279
Instruction Manual

2
Page
-------------------------------------------------------------------------------------------- 3
--------------------------------------------------------------------------- 4 - 5
--------------------------------------------------------------------------- 5 - 7
-------------------------------------------------------------------------- 8
--------------------------------------------------------------------------------------- 8 - 10
--------------------------------------------------------------------------------------- 10
----------------------------------------------------------------------------------- 11
---------------------------------------------------------------------------- 12 - 17
---------------------------------------------------------------------------- 18
---------------------------------------------------------------------------- 19
Table of Contents
Section
Disclaimer
General Information
Safety and Warranty
Technical Specications
Operation
Maintenance
Troubleshooting
Parts Breakdown
Electrical Schematics
Warranty Registration
Model RS-CN-0120-5 / Model RS-CN-0160-5 / Model RS-CN-0202-5

3
Disclaimer
OMCAN IS NOT RESPONSIBLE FOR
ANY DAMAGES DUE TO WATER LEAKS.
WARRANTY FOR WATER LEAKS IS VOID
IF THE AMBIENT ROOM TEMPERATURE
EXCEEDS 75°F AND 55% RELATIVE
HUMIDITY, AND THE APPLIANCE DRAIN IS
NOT CONNECTED DIRECTLY TO A FLOOR
DRAIN.

4
General Information
Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan
and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or
negligent use of this equipment. The product shall only be operated by someone over the age of 18, of
sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct
operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the
machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of
the machine while in operation.
CHECK PACKAGE UPON ARRIVAL
Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the
external packaging, open carton to ensure all ordered items are within the box, and there is no concealed
damage to the machine. If the package has su󰀨ered rough handling, bumps or damage (visible or concealed),
please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may
initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be
lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse
for damaged products that were shipped collect or third party.
Before operating any equipment, always read and familiarize yourself with all operation and safety
instructions.
Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save
these instructions for future reference. Also save the original box and packaging for shipping the
equipment if servicing or returning of the machine is required.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et
Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne
ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de
plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour
utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication
de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine
ou des personnes à proximité de la machine pendant son fonctionnement.
VÉRIFIEZ LE COLIS DÈS RÉCEPTION
Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage
n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés
sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises
manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant
d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager
une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine
doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents
d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli
par un tiers transporteur.

5
General Information
Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations
et les consignes de sécurité.
Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces
instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour
l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba
Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona
inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona
mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido
entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada.
Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la
máquina mientras esta en el funcionamiento.
REVISE EL PAQUETE A SU LLEGADA
Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el
empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la
caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes
o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro
de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre
los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se
muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron
a recoger por terceros.
Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de
funcionamiento y seguridad.
Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para
salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el
envío del equipo si servicio técnico o devolución de la máquina que se requiere.
Safety and Warranty
Handle with care
Unplug the wall socket rst. Never tilt it over 45
degrees when handling.
Dry place
Always place the refrigerator in a dry location.

6
Safety and Warranty
Su󰀩cient space
The distance from both sides and back of refrigerator
to wall or other substance must be no less than 10
cm (4”). The refrigeration capability may decrease if
its surrounding space is too small to circulate air.
Well ventilated
Always place the refrigerator in an area with proper
ventilation. When using for the rst time, wait at least
24 hours after handling to start.
Far from heat source
Never place the refrigerator in direct sunlight. Never
place refrigerator near heat source as it reduces
refrigeration capabilities.
Heavy load
Never put any heavy objects on top of the
refrigerator.
Do not make holes
Never make any holes on the refrigerator. Do not
attach any objects onto the refrigerator.
Stable Location
Unpack and place the refrigerator on level and stable
ground.
Exclusive power socket
Normally, the power supply should be 100 – 120V,
60 Hz single phase AC with exclusive single phase
receptacle.
Do not share the socket
Never let the refrigerator share a socket with another
appliance. The cable may become hot and this may
cause a re.
DO NOT USE EXTENSION CORDS.
Protect cables
Never break or damage the cables as this may cause
current leakage resulting in a re.
No water ushing
Never spray down refrigerator with pressurized water
supply.
Avoid ammable and explosive objects
Never put any ammable or explosive items inside
the refrigerator such as gasoline or alcohol. Never
put any dangerous products in close proximity to the
refrigerator.
No spray
Do not spray the unit with a ammable substance
such as paint. This may result in a re.
After power break
After a power break or unplugging the refrigerator,
always wait at least 5 minutes before starting the
refrigerator again.
Medical Storage
No medicine is allowed to be kept inside the
refrigerator.
NOTE
• The electric circuit diagram and parameters on the product name plate are subject to change without the
manufacturer having to change the manual.
• The design might be improved without notice.
• If the power cord is damaged, it must be replaced by the manufacturer, its service agent or a qualied
electrician in order to avoid injury.
WARNING: The unit uses R290 refrigerant. Make sure that all precautions against re
have been taken.
RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure

7
Safety and Warranty
or other damages resulting from installation in non-commercial or residential applications. The right
is reserved to deny shipment for residential usage; if this occurs, you will be notied as soon as
possible.
1 YEAR PARTS AND LABOUR BENCH WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop o󰀨 to either
an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the
equipment.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
improper use.
Please see https://omcan.com/disclaimer for complete info.
WARNING:
The packaging components are classied as normal solid urban waste and can therefore be disposed of
without di󰀩culty.
In any case, for suitable recycling, we suggest disposing of the products separately (di󰀨erentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

8
Technical Specications
Operation
Model RS-CN-0120-5 RS-CN-0160-5 RS-CN-0202-5
Capacity 120 L / 4.2 cu.ft. 160 L / 5.65 cu.ft. 202 L / 7.13 cu.ft.
Rack Size
13.2” x 25”
335 x 636mm
13.2” x 32”
335 x 813mm
13.2” x 45.5”
335 x 1156mm
14.4” x 25”
367 x 636mm
14.4” x 32”
367 x 813mm
14.4” x 45.5”
367 x 1156mm
Shelf Load Capacity 33.1 lbs. / 15 kgs. 44.1 lbs. / 20 kgs.
Temperature Range 0 - 12°C / 32 - 53.6°F
Max Ambient Temp
Rating 32°C / 90°F
Power Input 160 W 360 W
Rated Current 2.7 / 3A 3A 3.9A
Electrical 110V / 60Hz / 1
Refrigerant R290
Weight 125.7 lbs. / 57 kgs. 145.5 lbs. / 66 kgs. 195.1 lbs. / 88.5 kgs.
Packaging Weight 132.3 lbs. / 60 kgs. 153.2 lbs. / 69.5 kgs. 203.9 lbs. / 92.5 kgs.
Dimensions 27.6” x 22.4” x 27”
702 x 568 x 686mm
34.6” x 22.4” x 27”
880 x 568 x 686mm
48” x 22.4” x 27”
1219 x 568 x 686mm
Packaging Dimensions 30.4” x 24.7” x 28.9”
773 x 627 x 735mm
37.4” x 24.7” x 28.9”
951 x 627 x 735mm
50.8” x 24.7” x 28.9”
1290 x 627 x 735mm
Item Number 47107 47278 47279
BEFORE USE
Ensure the unit is upright and positioned in its location for 12 hours prior to use.
Plug the refrigerator in a 110V~ socket exclusively for the unit. After the refrigerator is running, test the air
suction to conrm it is su󰀩ciently cold. Then you may put food inside the unit. Make sure the food product is
already cooled before placing it in the display case. The unit should not be used to cool food products.
DIGITAL TEMPERATURE CONTROLLER
The digital temperature controller is easy to operate and controls the compressor.
• The main functions are: Temperature display, temperature control, manual control, automatic defrost, light
control, value storing, self-testing and parameter locking.

9
Operation
Digital Controller Operation:
1. Set Temperature:
Press SET and the set temperature is displayed.
Press or button to modify and store the displayed value.
Press SET to exit the adjustment and display the cold-room temperature.
2. If no buttons are pressed within 10 seconds, the cold-room temperature will be displayed.
3. Illumination:
Press the light button, it lights. Press the light button again, the light turns o󰀨.
4. Manual start/stop defrost:
Press the light button and hold for 6 seconds to defrost or stop defrost.
5. Refrigerant LED:
During refrigeration, the LED is on. When the cold-room temperature is consistent, the LED is o󰀨. During
the delay start, the LED ashes.
6. Defrost LED:
During defrosting, the LED is on. When it stops defrosting, the LED is o󰀨. During the delay display of
defrost, the LED ashes.
7. Digital Controller Reset:
When the display shows “disorder”, press button for 2 seconds until buzzer rings, quickly press button
for 6 seconds until the buzzer rings again. The display will ash for 3 seconds and it will be restored to the
factory setting.
CAUTION
• Reducing the frequency of opening the refrigerator door will keep more cold air inside the refrigerator.
• Do not block air suction or outlet. Air must continue circulating to increase refrigeration capability.
• Do not over ll or over stock the refrigerator, as it will inuence the cooling e󰀨ect. Adjust the rack height for
proper food storage.
• Cool hot food down to room temperature before storing it in the refrigerator.
• Try to reduce open times and keep refrigerator cold and closed, if power is ever o󰀨. Only allow a skilled
service individual with proper tools to repair damaged power cables. Never touch compressor, as it can
result in injury.
• If supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualied
persons in order to avoid a hazard.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of
obstruction.
WARNING: Do not use mechanical devices of other means to accelerate the defrosting process, other than
those recommended by the manufacturer.
WARNING: Do not damage the refrigerant circuit.
WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless
they are of the type recommended by the manufacturer.

10
Maintenance
Keep the refrigerator clean and perform periodical maintenance as necessary. Always unplug the socket before
maintenance. Never use a damaged plug or loose socket in order to prevent from electric shock or short
circuit. Never ush the refrigerator. Never use alkali detergent, soap, gasoline, acetone or brush.
1. Clean outside:
Dip soft cloth in neutral detergent (tableware detergent) to clean the outside of the refrigerator and then
wipe it with dry soft cloth.
2. Clean inside:
Take rack out for cleaning with water. Use soft cloth to wipe the box.
3. Shut down refrigerator for a long time:
Take all food out and unplug the wall socket. Clean both inside and outside of the refrigerator thoroughly
and open the door for su󰀩cient dry. The glass breaks easily. Keep the glass far from children.
4. Replacement of lamp in the light box:
If the LED lamp is damaged, it must be replaced by the manufacturer, or its service agent.
Operation
CAUTION: Risk of re. The height of the triangle in the symbol should be at least 15mm.

11
Troubleshooting
Trouble Cause and Remedy
No refrigeration Is the plug in the socket well?
Is the fuse broken?
Is there no power?
Unsatisfactory refrigeration Is it under the sunlight? Is there any heat source nearby?
Is the surrounding ventilation bad?
Does the door close well? Has the door been open for a long time?
Is the door seal strip deformed or damaged?
Is food congested or too much?
Does food block the air suction outlet?
Regulate the temperature controller.
Too much noise The refrigerator is not level.
The refrigerator touches the wall or other objects.
There is a loose part in the refrigerator.
Contact Omcan at 1-800-465-0234 for help if simple troubleshooting does not solve the problems.
The following situations are not problems:
1. The murmur of water is heard when the refrigerator is working. This is normal as the coolant is circulating in
the system.
2. During wet season, condensation may be found on the outside of the refrigerator. This is not a problem,
this is caused by high humidity. Simply use a cloth to wipe it.

12
Model RS-CN-0120-5 47107
Parts Breakdown

13
Item No. Description Position Item No. Description Position Item No. Description Position
AA062 Power Cord for 47107 1 79312 Nut Decoration for 47107 12-3 30759 Evaporator Protect Board for 47107 29
68510 Fixed Board of PCB Box for 47107 2 30624 Dry Filter for 47107 13 30760 Rear Middle Pillar for 47107 30
AA063 Condensator for 47107 3 30617 Wire Board for 47107 14 30761 Rear Base Panel for 47107 31
AA047 Left Condensator Cushion for 47107 4-1 30744 Water Pipe for 47107 15 AH727 Front Middle Pillar for 47107 32
AH715 Right Condenser Pad for 47107 4-2 AH722 Front Glass for 47107 16 AH728 Evaporator for 47107 33
AH716 Left Glass for 47107 5 AH723 Upper Glass for 47107 17 30764 Foam Base of Evaporator for 47107 34
AH717 Left Panel for 47107 6 67313 Bottom Shelf Bracket Left for 47107 18 30765 Plastic Base for Foam for 47107 35
AA050 Control Box for 47107 7-1 AH724 Fan Blade for 47107 19-1 30766 Rear Bottom Pillar for 47107 36
AA051 Control Box Cover for 47107 7-2 30793 Fan Blade for 47107 19-2 30767 Front Bottom Pillar for 47107 37
68332 Temperature Sensor for 47107 8-1 AA055 Motor Fan for 47107 20 AA058 Bottom Base of Compressor for 47107 38
AA049 Defrost Probe for 47107 8-2 67314 Bottom Shelf Bracket Right for 47107 21 30769 Front Frame for 47107 39
AH718 Hight Temperature Sensor for 47107 8-3 30751 Pillar for Bracket for 47107 22 30770 Outer Door Frame for 47107 40
AA052 Main Circuit Board for 47107 8-4 AH725 Left Seal for 47107 23 30771 Inner Door Frame for 47107 41
AA053 Digital Controller for 47107 8-5 AH726 Right Seal for 47107 24 AH729 Door Glass for 47107 42
AH719 Compressor for 47107 9 30754 Decorative Board for 47107 25 AA060 LED Light for 47107 43-1
AH720 Right Panel for 47107 10 30755 Top Panel for 47107 26 68356 Driver for 47107 43-2
AH721 Right Glass for 47107 11 30756 Shelf 1 for 47107 27-1 30742 Accumulator for 47107 44
79314 Decoration Nut Gasket for 47107 12-1 30757 Shelf 2 for 47107 27-2 AH730 Copper Tube Clamp for 47107 45
79313 Nut Gasket for 47107 12-2 30758 Vent Tray for 47107 28 AH731 High Temperature Tube for 47107 46
Model RS-CN-0120-5 47107
Parts Breakdown

14
Model RS-CN-0160-5 47278
Parts Breakdown

15
Item No. Description Position Item No. Description Position Item No. Description Position
AA062 Power Cord for 47278 1 79312 Nut Decoration for 47278 12-3 AH735 Evaporator Protect Board for 47278 29
68510 Fixed Board of PCB Box for 47278 2 30624 Dry Filter for 47278 13 30805 Rear Middle Pillar for 47278 30
AA063 Condensator for 47278 3 30617 Wire Board for 47278 14 30806 Rear Base Panel for 47278 31
AA047 Left Condensator Cushion for 47278 4-1 30744 Water Pipe for 47278 15 AH736 Front Middle Pillar for 47278 32
AH715 Right Condenser Pad for 47278 4-2 AH732 Front Glass for 47278 16 AH737 Evaporator for 47278 33
AH716 Left Glass for 47278 5 AH733 Upper Glass for 47278 17 30809 Foam Base of Evaporator for 47278 34
AH717 Left Panel for 47278 6 67313 Bottom Shelf Bracket Left for 47278 18 30810 Plastic Base for Pillar for 47278 35
AA050 Control Box for 47278 7-1 AH724 Fan Blade for 47278 19-1 68517 Rear Bottom Pillar for 47278 36
AA051 Control Box Cover for 47278 7-2 30793 Fan Blade for 47278 19-2 68516 Front Bottom Pillar for 47278 37
68332 Temperature Sensor for 47278 8-1 AA055 Motor Fan for 47278 20 AA058 Bottom Base of Compressor for 47278 38
AA049 Defrost Probe for 47278 8-2 67314 Bottom Shelf Bracket Right for 47278 21 30814 Front Frame for 47278 39
AH718 High Temperature Sensor for 47278 8-3 30751 Pillar for Bracket for 47278 22 30815 Outer Door Frame for 47278 40
AA052 Main Circuit Board for 47278 8-4 AH725 Left Seal for 47278 23 30816 Inner Door Frame for 47278 41
AA053 Digital Controller for 47278 8-5 AH726 Right Seal for 47278 24 AH738 Door Glass for 47278 42
AH719 Compressor for 47278 9 30799 Decorative Board for 47278 25 AA066 LED Light for 47278 43-1
AH720 Right Panel for 47278 10 30800 Top Panel for 47278 26 68356 Driver for 47278 43-2
AH721 Right Glass for 47278 11 71684 Chrome Shelf 2 for 47278 27-1 30742 Accumulator for 47278 44
79314 Decoration Nut Gasket for 47278 12-1 71683 Chrome Shelf 1 for 47278 27-2 AH730 Copper Tube Clamp for 47278 45
79313 Nut Gasket for 47278 12-2 AH734 Vent Tray for 47278 28 AH731 High Temperature Tube for 47278 46
Model RS-CN-0160-5 47278
Parts Breakdown

16
Model RS-CN-0202-5 47279
Parts Breakdown

17
Item No. Description Position Item No. Description Position Item No. Description Position
AA068 Door Glass for 47279 1 60119 Switch for 47279 20 30751 Pillar for Bracket for 47279 39
AA069 Inner Door Frame for 47279 2 AH717 Left Panel for 47279 21 AH725 Left Seal for 47279 40
AA070 Outer Door Frame for 47279 3 AA050 Control Box for 47279 22-1 AH726 Right Seal for 47279 41
AH739 Front Middle Support for 47279 4 AA051 Control Box Cover for 47279 22-2 AA089 Decorative Board for 47279 42
30776 Cover for Air Outlet for 47279 5 60534 Compressor for 47279 23 AA090 Top Panel for 47279 43
AA072 Cover for Air Suction for 47279 6 AA083 Backing Plate for 47279 24 AA091 Shelf 1 for 47279 44
68298 Switch Base for 47279 7 71518 Nut for 47279 25-1 AA092 Shelf 2 for 47279 45
61246 Wire Clip Holder for 47279 8-1 AA084 Drainage Pipe Joint for 47279 25-2 AA093 Vent Tray for 47279 46
61245 Wire Clip Cover for 47279 8-2 79314 Decoration Nut Gasket for 47279 26-1 AA094 Evaporator Protect Board for 47279 47
AA062 Power Cord for 47279 9 79313 Nut Gasket for 47279 26-2 AA095 Rear Middle Pillar for 47279 48, 50
AA073 Condenser Limiting Plate for 47279 10 79312 Nut Decoration for 47279 26-3 AA096 Rear Base Panel for 47279 49
AA074 Fixed Board of PCB Box for 47279 11 30624 Dry Filter for 47279 27 AA098 Evaporator for 47279 51
60948 Water Receiver for 47279 12 30744 Water Pipe for 47279 28 AA099 Foam Base of Evaporator for 47279 52
AA075 Tray of Heater for 47279 13 68368 Snap Ring for 47279 29 AA100 Plastic Base for Pillar for 47279 53
AA076 Condensator for 47279 14 AH720 Right Panel for 47279 31 AA101 Rear Bottom Pillar for 47279 54
AA077 Right Condensator Cushion for 47279 15 AH732 Front Glass for 47279 32-1 AA102 Front Bottom Pillar for 47279 55
AA078 Left Condensator Cushion for 47279 16 AH733 Upper Glass for 47279 32-2 AA103 Rear Bottom Pillar Lining for 47279 56
AH716 Left Glass for 47279 17, 30 AA086 Motor Fan for 47279 33 AA104 Front Bottom Pillar Lining for 47279 57
68332 Temperature Sensor for 47279 18-1 67313 Bottom Shelf Bracket Left for 47279 34 AA105 Bottom Base of Compressor for 47279 58
AA049 Defrost Probe for 47279 18-2 67314 Bottom Shelf Bracket Right for 47279 35 AA106 Front Frame for 47279 59
AH718 High Temperature Sensor for 47279 18-3 AA087 Fan Blade for 47279 36 AA107 LED Light for 47279 60-1
AA052 Main Circuit Board for 47279 19-1 79662 Metal Base of Fan Motor for 47279 37 68356 Driver for 47279 60-2
AA082 Digital Controller for 47279 19-2 AH740 Fan Blade for 47279 38 30742 Accumulator for 47279 61
Model RS-CN-0202-5 47279
Parts Breakdown

18
Model RS-CN-0120-5 47107
Model RS-CN-0160-5 47278
Model RS-CN-0202-5 47279
Electrical Schematics

19
Warranty Registration
Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación,
cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en:
Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la
carte au niveau de la perforation, puis l’envoyer à l’adresse spécié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:
Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear o󰀨 the card at
the perforation and then send to the address specied below. You can also register online by visiting:
OMCAN
PRODUCT WARRANTY REGISTRATION
3115 Pepper Mill Court,
Mississauga, Ontario
Canada, L5L 4X5
https://omcan.com/warranty-registration/
or email to: [email protected]
Purchaser’s Information
Name: Company Name:
Address:
Telephone:
City: Province or State: Postal or Zip: Email Address:
Country: Type of Company:
Restaurant Bakery Deli
Dealer from which Purchased: Butcher Supermarket Caterer
Dealer City: Dealer Province or State: Institution (specify):
Invoice: Other (specify):
Model Name: Model Number: Serial Number:
Machine Description:
Date of Purchase (MM/DD/YYYY): Date of Installation (MM/DD/YYYY):
Would you like to extend the warranty? Yes No

Por correo en Canadá
Pour postale au Canada
For mailing in Canada
Por correo en los EE.UU.
Pour di󰀨usion aux États-Unis
For mailing in the US
OMCAN
PRODUCT WARRANTY REGISTRATION
4450 Witmer Industrial Estates, Unit 4,
Niagara Falls, New York
USA, 14305
Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan

Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North
American food service industry. Our success over these many years can be attributed to our commitment
to strengthen and develop new and existing relationships with our valued customers and manufacturers.
Today with partners in North America, Europe, Asia and South America, we continually work to improve
and grow the company. We strive to offer customers exceptional value through our qualied local sales
and service representatives who provide convenient access to over 5,000 globally sourced products.
Depuis 1951 Omcan a grandi pour devenir un des “leaders” de la distribution des équipements et
matériel pour l’industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces
nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles
et existantes relations avec nos clients et les fabricants de valeur. Aujourd’hui avec des partenaires en
Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et
développer l’entreprise. Nous nous efforçons d’offrir à nos clients une valeur exceptionnelle grâce à
nos ventes locales qualiées et des représentants de service qui offrent un accès facile à plus de 5000
produits provenant du monde entier.
Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros
de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir
a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos
clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan
continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor
excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un
fácil acceso a más de 5,000 productos con origen a nivel mundial.