Omcan IC-CN-0050 User manual

Revised - 06/26/2017
Toll Free: 1-800-465-0234
Fax: [phone]
Email: [email protected]
www.omcan.com
Ice Shaver
Model IC-CN-0050
Item 43466
Instruction Manual

2
Page
--------------------------------------------------------------------------- 3 - 4
--------------------------------------------------------------------------- 4 - 7
---------------------------------------------------------------------- 7 - 8
-------------------------------------------------------------------------------------------- 8
--------------------------------------------------------------------------------------------- 9
----------------------------------------------------------------------------------- 9 - 11
----------------------------------------------------------------------------------- 12
---------------------------------------------------------------------------- 13 - 14
---------------------------------------------------------------------------- 15
------------------------------------------------------------------------------------------- 16 - 18
---------------------------------------------------------------------------- 19
Table of Contents
Section
General Information
Safety and Warranty
Technical Specications
Installation
Operation
Maintenance
Troubleshooting
Parts Breakdown
Electrical Schematics
Notes
Warranty Registration
Model IC-CN-0050

3
General Information
Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan
and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or
negligent use of this equipment. The product shall only be operated by someone over the age of 18, of
sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct
operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the
machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of
the machine while in operation.
CHECK PACKAGE UPON ARRIVAL
Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the
external packaging, open carton to ensure all ordered items are within the box, and there is no concealed
damage to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed),
please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may
initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be
lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse
for damaged products that were shipped collect or third party.
Before operating any equipment, always read and familiarize yourself with all operation and safety
instructions.
Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save
these instructions for future reference. Also save the original box and packaging for shipping the
equipment if servicing or returning of the machine is required.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et
Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne
ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de
plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour
utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication
de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine
ou des personnes à proximité de la machine pendant son fonctionnement.
VÉRIFIEZ LE COLIS DÈS RÉCEPTION
Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage
n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés
sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises
manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant
d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager
une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine
doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents
d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli
par un tiers transporteur.

4
General Information
Safety and Warranty
Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations
et les consignes de sécurité.
Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces
instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour
l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba
Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona
inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona
mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido
entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada.
Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la
máquina mientras esta en el funcionamiento.
REVISE EL PAQUETE A SU LLEGADA
Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el
empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la
caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes
o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro
de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre
los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se
muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron
a recoger por terceros.
Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de
funcionamiento y seguridad.
Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para
salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el
envío del equipo si servicio técnico o devolución de la máquina que se requiere.
Your safety and the safety of others are very important. We have provided many important safety messages in
this manual and on your appliance. Always read and obey all safety messages.
DANGER
Means that failure to heed this safety statement may result in severe personal injury or death.

5
Safety and Warranty
WARNING
Means that failure to heed this safety statement may result in extensive product damage, severe personal
injury or death.
CAUTION
Means that failure to heed this safety statement may result in minor or moderate personal injury, or property or
equipment damage.
All safety messages will alert you to what the potential hazard is, tell you how to reduce the chance of injury,
and let you know what would happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of re, electric shock or injury, when using your units, follow these basic
precautions:
• Plug into grounded 3-prong outlet.
• Do not remove grounding prong.
• Do not use an adapter.
• Do not use an extension cord.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFEGUARDS
Before the unit is used, it must be properly positioned and installed as described in this manual, so read the
manual carefully. The warranty may be affected or voided by an incorrect installation. To reduce the risk of re,
electrical shock or injury when using the appliance, follow basic precautions, including the following:
DANGER
• It is recommended that a separate circuit, serving only your appliance, be provided. Use receptacles that
cannot be turned off by a switch or pull chain.
• Do not connect or disconnect the electric plug when your hands are wet.
• Never unplug by pulling on the power cord. Always grip the plug rmly and pull straight out from the outlet.
• Never clean the appliance parts with ammable uids. Do not store or use gasoline or other ammable
vapors and liquids in the unit or in the vicinity of this or any other appliance. The fumes can create a re
hazard or explosion.
• Before proceeding with cleaning and maintenance operations, make sure the power line of the unit is
disconnected.
• Unplug the appliance or disconnect power before cleaning or servicing. Failure to do so can result in
electrical shock or death.
• Do not attempt to repair or replace any part of your appliance unless it is specically recommended in this
manual. All other servicing should be done by a qualied technician.
WARNING
• The appliance must be installed with all electrical connections in accordance with state and local codes.
A standard electrical supply as mentioned on the nameplate, properly grounded in accordance with the

6
Safety and Warranty
National Electrical Code and local codes and ordinances is required.
• Do not kink or pinch the power supply cord between the appliance and the cabinet.
• The fuse (or circuit breaker) size should be minimum 10 amperes for the appliance.
• It is important for the appliance to be well leveled for proper operation.
• Remove the packing materials and clean the appliance before using.
• If the appliance will not be used for a long time, before the next use it must be thoroughly cleaned. Follow
carefully any instructions provided for cleaning or use of sanitizing solution. Do not leave any solution
inside the appliance after cleaning.
• DO NOT use solvent-based cleaning agents or abrasives on the interior. These cleaners may damage or
discolor the interior. Use rubber gloves to protect hands.
• Carefully read the material safety instructions on the container of the appliance cleaner.
• Never allow children to operate, play with the appliance.
• DO NOT use this apparatus for other than its intended purpose.
ELECTRICAL CONNECTION
Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal
safety, this appliance must be properly grounded. The power cord of this appliance is equipped with a
3-prong grounding plug that mates with a standard 3-prong grounding wall outlet to minimize the possibility
of electric shock hazard from the appliance. Have the wall outlet and circuit checked by a qualied electrician
to make sure the outlet is properly grounded. When a standard 2-prong wall outlet is encountered; it is your
responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet. The appliance
should always be plugged into its own individual electrical outlet which has a voltage rating that matches the
rating label on the appliance, this provides the best performance and also prevents overloading house wiring
circuits which could cause a re hazard from overheated wires. Never unplug your appliance by pulling on the
power cord. Always grip the plug rmly and pull straight out from the outlet. When moving the appliance, be
careful not to damage the power cord.
EXTENSION CORD
Because of potential safety hazards under certain conditions, it is strongly recommended that you do NOT use
an extension cord with this appliance.
1 YEAR PARTS AND LABOUR BENCH WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop off to either
an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the
equipment.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
improper use.
Please see www.omcan.com/warranty.html for complete info.

7
Safety and Warranty
Technical Specications
WARNING:
The packaging components (cardboard, polyethylene, and others) are classied as normal solid urban waste
and can therefore be disposed of without difculty.
In any case, for suitable recycling, we suggest disposing of the products separately (differentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!
1 Water leakage plate. 8 Lid.
2 Base unit. 9 Ice duct.
3 Foot. 10 Blade adjustment
knob.
4 Outer shell. 11 Melt water drain
outlet.
5 Power switch. 12 Drain pipe.
6Handle. 13 Accessories.
7 Top cover. 14 Lock.

8
Technical Specications
Installation
Model IC-CN-0050
Voltage 115V / 60Hz
Power 200W
Capacity (1 cubic inch) 70 cubes
Max. Ice Shaving Capacity per
Minute 16.5 lbs. / 7.5 kgs.
Dimensions 12.8” x 15.75” x 17.9” / 325 x 400 x 455mm
Weight 33.7 lbs. / 15.3 kgs.
Item Number 43466
UNPACKING
Remove packaging materials
IMPORTANT: Do not remove any permanent instruction labels or the data labels on your appliance.
• Remove the appliance from the packaging. Make sure that all protective plastic lm and coatings are
thoroughly removed from all inner and outer surfaces.
• Do not use sharp instruments, rubbing alcohol, ammable uids, or abrasive cleaners to remove tape or
glue.
NOTE: Before using the appliance for the rst time, clean the internal cabinet with soapy water and
sanitizing solution (See the Maintenance section of manual).
LOCATION REQUIREMENTS
Make sure the unit is installed on a at surface and in a stable condition while in use. Keep away at least 10”
from the edge of the surface to reduce the risk of the unit falling. Keeping away from a heat source is essential.
NOTE: The appliance is for indoor use only.

9
Operation
Maintenance
• Open the lid, and clean the inside hopper with dry cloth. Then carefully press on the at surface of the
blade to make sure it is well xed.
NOTE: It is extremely important that:
• WHEN CHECKING THE BLADE BE SURE THE UNIT IS LOW ENOUGH SO YOU MAY SEE INSIDE THE
HOPPER. DO NOT REACH IN WITHOUT FULL VISIBILITY OF THE LOCATION OF THE BLADE.
• DO NOT TOUCH THE END OF THE BLADE. IT IS SHARP AND MAY RESULT IN SERIOUS INJURY.
• Before plug the power cord in please examine the cord, plug if there is any damage or hidden danger of
leakage, or the contact is good. The unit has power on demand and is always off.
• Open the lid and put in dened amount of ice cubes, then cover it. Kindly take note that the maximum of ice
cubes in the hopper should be at least 5cm deep from the top surface of the machine.
• Close the lid and Switch it on by the power switch on the side of the machine. For your safety, shaving will
not start with lid open.
• You can adjust the size of ice ake from big to small by turning the adjusting knob.
• For its full utilization and optimum efciency, it is suggested that the diameter of the ice cubes should be
around 1”. Big ice should be hammered into small pieces to make sure the size is suitable.
IMPORTANT: DO NOT HAMMER ICE INSIDE OF THE HOPPER OR YOU MAY DAMAGE THE
EQUIPMENT.
• If ice is stuck together in the hopper and will not separate with a gentle tap, carefully remove the ice in
order to break it apart for standard operation.
WARNING
Before proceeding with cleaning and maintenance operations, make sure the power line of the unit is
disconnected.
CLEANING
• Switch off and disconnect from the power supply before cleaning.
• Clean the interior of the appliance as often as possible.
• Do not use abrasive cleaning agents. These can leave harmful residues.
• Always use mild soapy water to clean the interior of the appliance. Rinse thoroughly with fresh water and
wipe dry after cleaning.
SANITIZING SOLUTION
To sanitize the unit, prepare a sanitizing solution made with ½ oz of household bleach mixed with 1 gallon of
hot water. Wipe the hopper and water proong rings and blade let stand for at least 3 minutes. Rinse and dry
thoroughly.
Use extreme caution when cleaning the interior of the appliance. Sharp blade can cut and cause injury.

10
Maintenance
CLEANING AND SANITIZING PROCESS
• Open the locks by hand, remove the top cover (DRAWING-A).
• Detach the big water-proong ring, and then the small water-
proong ring (DRAWING-B).
• Using a clean cloth, wipe the plate and rings and exert caution to
avoid injuries from the blade (DRAWING-C).
CLEANING
1. Clean the big waterproong ring with mild soapy water and rinse
thoroughly with fresh running tap water.
2. Clean the small waterproong ring with mild soapy water and rinse
thoroughly with fresh running tap water.
3. Clean the interior of the appliance with mild soapy water and rinse
thoroughly.
4. Wipe dries all parts that have been cleaned. Please exercise
caution when handling or cleaning near the blade (DRAWING-C).
SANITIZING
Disassemble the blade from the machine before performing this step
(see Changing the Blades).
1. With the prepared sanitizing solution made with ½ oz of household
bleach mixed with 1 gallon of hot water.
2. Wipe the hopper, the big water proong ring, the small
waterproong ring, and the blade and Ice duct and let stand for 3
minutes.
3. Apply the sanitizing solution to the drain outlet and let stand for 3
minutes.
4. Rinse all parts that were sanitized and dry them thoroughly.
5. Re-assemble the unit.
Note: Check the appliance again for safe and proper operation
after cleaning and reassembling.

11
Maintenance
CHANGING THE BLADES
PREPARING THE APPLIANCE FOR LONG STORAGE
CAUTION
If your appliance is left unused for a long time, before the next use it must be thoroughly cleaned. Follow
carefully any instructions provided for cleaning or use of sanitizing solution. Do not leave any solution inside
your appliance after cleaning.
If the appliance will not be used for a long time or is to be moved to another place:
• Shut off the electric supply at the main electrical power source.
• Clean the interior of the appliance.

12
Troubleshooting
Before taking the unit for servicing check the following:
• If the unit appears to be malfunctioning, read through the OPERATION section of this manual rst.
• If the problem persists, check the Troubleshooting Guide below. The problem may be simple and solvable
without servicing.
Problem Possible Cause Probable Correction
The appliance does not operate. No power. Connect the electric plug.
Overheat protection of motor. Wait for fall of temperature.
The fuse in the outlet is blown. Replace fuse.
The power switch is damaged. Replace power switch.
Unusual noise or vibrate
excessively.
The appliance has not been
installed in a level or stable
position.
Check installation position and
change if necessary.
The xed bolt on the appliance is
loose.
Screw down the bolt.
Ice cubes frozen together. Separate them with ice-wimble.
Larger ice. Hammer into small pieces to make
sure the size is suitable.
REFERENCE
Item Number Model Number Description Manufacturer Model Number
43466 IC-CN-0050 Ice Shaver 110V/60HZ/1 cETLus/ETL IS45

13
Parts Breakdown
Model IC-CN-0050 43466

14
Parts Breakdown
Model IC-CN-0050 43466
Item No. Description Position Item No. Description Position Item No. Description Position
61503 Metal Plate for IS45 1 61518 Axle for IS45 16 61533 Motor Protected Board for IS45 31
61504 Lid for IS45 2 61519 Small Belt Pulley for IS45 17 61534 Blade Adjustment Knob for IS45 32
61505 Cotter Pin for IS45 3 61520 Bearing for IS45 18 61535 Blade Bottom Holder for IS45 33
61506 Top Cover for IS45 4 61521 Belt for IS45 19 61536 Blade Top Holder for IS45 34
61507 Big Water Proong Ring for IS45 5 61522 Big Belt Pulley for IS45 20 61537 Support for IS45 35
61508 Small Water Proong Ring for IS45 6 61523 Handle for IS45 21 61538 Spring for IS45 36
61509 Impeller for IS45 7 61524 Back Shell for IS45 22 61539 Blade for IS45 37
61510 Bearing for IS45 8 61525 Lock for IS45 23 61540 Support for IS45 38
61511 Main Unit for IS45 9 61526 Capacitor for IS45 24 61541 Inner Drain Pipe for IS45 39
61512 Pole for IS45 10 61527 Foot for IS45 25 61542 Front Shell for IS45 40
61513 Bushing for IS45 11 61528 Base Plate for IS45 26 61543 Ice Duct for IS45 41
61514 Microswitch Holder for IS45 12 61529 Drain Pipe for IS45 27 61544 Power Switch for IS45 42
61515 Microswitch for IS45 13 61530 Melt Water Drain Outlet for IS45 28 61545 Power Supply Code for IS45 43
61516 Motor Base for IS45 14 61531 Base Unit for IS45 29 61546 Wiring Harness for IS45 44
61517 Motor for IS45 15 61532 Shutter for IS45 30

15
Electrical Schematics
Model IC-CN-0050 43466

16
Notes
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________

17
Notes
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________

18
Notes
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________

19
Warranty Registration
Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación,
cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en:
Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la
carte au niveau de la perforation, puis l’envoyer à l’adresse spécié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:
Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at
the perforation and then send to the address specied below. You can also register online by visiting:
OMCAN
PRODUCT WARRANTY REGISTRATION
3115 Pepper Mill Court,
Mississauga, Ontario
Canada, L5L 4X5
www.omcan.com/warrantyregistration.html
or email to: [email protected]
Purchaser’s Information
Name: Company Name:
Address:
Telephone:
City: Province or State: Postal or Zip: Email Address:
Country: Type of Company:
Restaurant Bakery Deli
Dealer from which Purchased: Butcher Supermarket Caterer
Dealer City: Dealer Province or State: Institution (specify):
Invoice: Other (specify):
Model Name: Model Number: Serial Number:
Machine Description:
Date of Purchase (MM/DD/YYYY): Date of Installation (MM/DD/YYYY):
Would you like to extend the warranty? Yes No

Por correo en Canadá
Pour postale au Canada
For mailing in Canada
Por correo en los EE.UU.
Pour diffusion aux États-Unis
For mailing in the US
OMCAN
PRODUCT WARRANTY REGISTRATION
4450 Witmer Industrial Estates, Unit 4,
Niagara Falls, New York
USA, 14305
Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan

Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North
American food service industry. Our success over these many years can be attributed to our commitment
to strengthen and develop new and existing relationships with our valued customers and manufacturers.
Today with partners in North America, Europe, Asia and South America, we continually work to improve
and grow the company. We strive to offer customers exceptional value through our qualied local sales
and service representatives who provide convenient access to over 3,500 globally sourced products.
Depuis 1951 Omcan a grandi pour devenir un des “leaders” de la distribution des équipements et
matériel pour l’industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces
nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles
et existantes relations avec nos clients et les fabricants de valeur. Aujourd’hui avec des partenaires en
Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et
développer l’entreprise. Nous nous efforçons d’offrir à nos clients une valeur exceptionnelle grâce à
nos ventes locales qualiées et des représentants de service qui offrent un accès facile à plus de 3500
produits provenant du monde entier.
Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros
de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir
a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos
clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan
continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor
excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un
fácil acceso a más de 3,500 productos con origen a nivel mundial.