Omega Altise Elite AE2400 User manual

AE2400
Elite Series Ceramic Tower
Instruction
Manual

omega altise
2
Important Safety Instructions
1. Disconnect the power plug before dismantling, assembling or before cleaning.
2. Make sure the heater is on a dry and even surface.
3. Always use the heater in an upright position.
4. Do not insert or allow foreign objects to enter any ventilation or exhaust opening,
as this may cause an electric shock, fire or damage to the appliance.
5. This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
6. Children should be supervised to ensure that they do not play with the appliance.
7. The heater must not be located immediately below a socket-outlet;
8. Do not use this heater in the immediate surroundings of a bath, a shower, or a
swimming pool;
9. If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent, or similarly qualified persons in order to avoid a hazard;
10. Do not use your appliance with an extension cord unless it has been checked
and tested by a qualified electrician or electrical supplier.
11. Do not use the appliance for any other purpose than its intended use.
12. Do not position the appliances in close proximity to curtains or other combustible
materials. Keep combustible material such as furniture, cushions, bedding,
paper, clothes, curtains etc. at least 1.0m away from the heater.
13. Do not operate in areas where gasoline, paint or other flammable liquids are
used or stored.
CAUTION: In order to avoid a hazard due to inadvertent resetting of the
thermal cutout, this appliance must not be supplied through an external
switching device such as a timer, or connected to a circuit that is regularly
switched on and off by a utility.
WARNING: IN ORDER TO AVOID OVERHEATING, DO NOT COVER THIS
HEATER
Read all instructions before using this unit. Keep them for future reference.

omega altise
3
Specifications
Model AE2400 Controls Touch Screen and
Remote
Rated Voltage 220-240V / 50Hz Settings 3 speed
Watts 2400W Oscillation 80o
Dimensions
(h x w x d) mm 790 x 200 x 200 Timer 7.5hr
Weight Nett 4.7kg Warranty 2 year replacement
Parts List
1. Control panel and display window
2. Air outlet
3. Power switch
4. Handle
5. Air filter and filter cover

omega altise
4
Assembly Instructions
Base nut
1. Remove all items of packaging from the tower ceramic heater.
2. Turn the tower body upside down and remove the base nut.
3. Position the glass base over the post at the bottom of the unit.
4. Screw the base onto the tower body with the supplied base nut.
5. Turn the tower fan back to an upright position. It is now ready for use.
6. Please ensure you remove the remote control from the packaging.
base nut
Operating Instructions
1. Use in a dry place, free of excessive humidity and water.
2. This unit can be operated by the control panel on the fan or by remote control in
the same manner.
3. The power switch (3) must be switched to the on position ( I ) for the unit to work.
The unit will sound and is ready for use. Press the power switch to the off
position ( O ) to turn the heater off.

omega altise
5
CONTROL PANEL
ON/OFF: Press the ON/OFF
button and the machine starts
operation at low heating power
(1200W), the power indicating light will
be on. Press the key again and all
functions will be stopped and the unit will
go into standby. The power indicating
light will be off.
IMPORTANT: When you turn the unit off the fan will continue to function for a short
period of time to cool the heating element.
HEATER: Press the HEATER button to change between LOW (1200W)
and HIGH (2400W) power. The LED indicator will change to highlight the
heat setting the unit is on accordingly.
SWING: Press the SWING button to activate the oscillation function for
widespread heat distribution. The LED will illuminate when this function is
on. Press again to turn the oscillation function off.
TIMER: Press the TIMER button to activate the
timer-off function. Each time the button is
pressed the timer will increase from 30mins up
to a maximum of 7.5 hours. Each press of the button will
increase the timer by 30mins. The control panel will show
the time of your setting. The unit will turn off
automatically according to your timer setting.
REMOTE CONTROL OPERATION
Open the cover at the back of the remote control and
insert 2 x AAA batteries (not supplied).
There are 4 keys on the remote control which operates
the same as the control panel.
Point the remote control to direction of the display
window of the heater. The signal distance is about 6
meters.

omega altise
6
Care and Maintenance
1. Always disconnect the cord from the
electrical outlet when cleaning this unit.
2. Light accumulated dust may be removed
from the unit with a soft cloth or vacuum
cleaner using the dusting brush
attachment.
3. Wipe the exterior surfaces of the unit
occasionally with a cloth moistened (not
dripping wet) with a mild soap solution. Dry
the case thoroughly with a soft dry cloth
before operating the unit.
4. Avoid the use of gasoline, benzine, thinner
etc as they may result in damage to the
unit. Filter
Cover
Air Filter
5. Clean the air filter monthly if needed.
Remove the air filter for cleaning as shown
in the diagram.
6. Store the unit in a clean dry place when
not in use.
CAUTION! Do not immerse the fan in water or allow water to drip into
the interior of the fan housing as this could create a fire or electric
shock hazard.
WARNING! Do not attempt to open or repair the fan yourself. Doing so
could void the warranty and cause damage or personal injury.
Omega Altise products are distributed in Australia by MEA,
(A Division of Hagemeyer Brands Australia Pty Ltd)
ABN 28 001 375 686
Locked Bag 4013, Kingsgrove NSW 2208
Phone: [phone]
Fax: [phone]
Email: [email protected]
Web: meaappliances.com.au