Omnia OM7-B User manual

Smart Door Lock
OM7-B

◆Battery: 4pcs (AA) INCLUDED
◆Working voltage: 6VDC
◆Working current：≤300mA
◆Static current：≤30uA
◆Working Temperature：-20～60℃
◆Working humidity: 10～90RH
◆Super administrator: 1
◆One-time users: 5
◆Alarm voltage: ≤4.6V
◆Password number: 6～12 digits
◆Card type: Mifare Card
◆Super password number: 64 digits
◆Storage capacity: 99 sets (password+card)
◆Ordinary user: 2 (card,mobile )
◆Temporary users: 10 groups (App sets the time limited)
◆Remote dynamic code: 1 group (valid within 5 minutes for
the app setting)
◆Unlockway: Password, MF Card, app, emergency key
◆Automatic lock time: set 1-99S
◆Suitable door thicknes: 38-48mm
Technical Specification
◆Factory administrator/user code: “666888” (manage
password/unlock the door)
◆Administrators: password 1（Super administrator), card 1, app 1.

◆ Activate keypad: Touch the key pad in the center.
◆ Lock: Press【#】
◆ Unlock: Password code +【#】.
◆ Back/Exit: Press【*】
◆ Confirm: Press【#】
◆ System will exit when its not operated for more than 8 seconds.
◆ Administrator ID is number: 0, 1, 2 (password, card, app)
◆ One-time user ID is from No 3 to No 7
◆ Normal user ID is from No 18 to No 99
Keypad/ID code Function Description
Lock Setting
1. Modify administrator code
Long press【*】——input administrator code——press【#】
——input new administrator code——press【#】——input new
administrator code——press【#】
2. Modify user code
Long press【*】——input user code——press【#】——input new
user code——press【#】——input new user code
——press【#】
3. Modify card
Long press【*】——put old card on keypad——put new card on
keypad.
1. Add a card as administrator（ID NO.1,only one administrator can
be added）
Long press【#】——input administrator code——press【#】
——press[1] ——press [2] ——put card on keypad.
Other setting

2. Add normal users (Total of 82 users can be added. ID NO. 18 to
92)
Long press【#】——input administrator code ——press【#】
——press[1] ——press[1]——press[1]——input code or
card——press【#】——input code——press【#】
(Note: You only need to enter the card once.).
3. Add one-time users (Total of 5 users can be added. ID NO. 3 to 5)
Long press【#】——input administrator code——press【#】
——press[1] ——press[1] —— press[2] ——input code ——press 【
#】——input code——press【#】
(Note: The one-time user is deleted after first use and its only password
capable, card cant be used.)
4. Unlock mode setting (single mode/double mode)
Long press【#】——input administrator code——press [2]
——press [2] ——press [1] single user or [2]double user ——press
【#】
(Note: If you set double mode unlock, you need to open the door with
any combination of passwords you have set. Password + password,
password + card).
5. Delete single password
Long press【#】——input administrator code——press【#】
——press[1] ——press [3] ——press [1] ——input code, card or user
ID NO.
6. Delete all users
Long press【#】——input administrator code——press【#】
——press[1] ——press [3] ——press [2].

7. Manual/automatic lock setting
Long press【#】——input administrator code——press【#】
——press[2]——press[2] ——press [3] ——press[1] manual or [2]
auto lock.
(Note: automatic lock time setting is 1-99S.).
8. Volume setting
Long press【#】——input administrator code——press【#】
——press[2] ——press [3]——press [3] ——Press [1] volume up or
[2] volume down
9. Network setting and APP pairing
9.1 On lock:
Long press【#】——input administrator code——press【#】
——press [2] ——press[1] ——press [1] Smart Mode (Ez Mode) [2]
AP mode.
(Note: Make sure APP and cellphone are connected to the same WiFi
network).
9.2 On smart phone: Search and download ‘Smart Life’ in app store.
9.3 Open the APP, register and login with cellphone number.
1. Doorlock configuration in EZ Mode
open “Smart Life” app——(1) go to add device——(2) Security &
Sensor——Lock（WiFi）——(3) select WiFi network and enter the
WiFi password——(4.1) just confirm “0” key indicator rapidly
blink——(4.2) select fast flashing ——(5) waiting to connect to
network—— (6) network and app set up succeeded.

(5) (6)
(1) (2) (3)
(4.1) (4.2)

2. AP Network Operate (if your home WiFi signal is weak please
choose AP mode)
On lock: press【#】→ input administrator code→press【#】→
press [2] →press [1].
open "Smart Life" APP→1.add device→2.Security&Sensor→Lock
(WiFi）→3.select WIFI network and enter WiFi password →(4.1) just
confirm “0” key indicator slowly blink→(4.2) select slow flashing→
5.choose hotspot to connect→6. connect to the Doorlock hotspot
in the WiFi configuration of your phone →7.click return arrow when
you connected successful→ waiting for connecting network to
succeed.
1. 2. 3.

9.4 Message notification
Open ”Smart Life” app→Me→setting→Notification
(Note: Most mobile phones will receive notification when you finish
configuration).
6. 7.
4.1 4.2 5.


9.5 Remote unlock request
Input 888 # to request remote unlock . The APP will send a
notification, then you can unlock remotely on the app within 90S.
9.6 Temporary password (ID NO.8~17)
You can generate temporary passwords manually or automatically
to send to the guests.
An expiration time can be set. Note: You can make maximum of 10
groups/temporary passwords.
9.7 Remote dynamic password: (After the APP and lock has
connected successfully, on the APP slide to the left)
It can automatically generate remote dynamic passwords that are
valid for 5 minutes.
1.Left/Right conversion function
To install the lock for left side, ensure the toggle button on the back
assembly is set to L .
To install the lock for right side, ensure the toggle button on the
back assembly is set to R .
Other Lock Function

2.Anti-Peeping Password
You can input any code before and after the right password to unlock the
door.
Such as:
①※※※※※+666888
②666888+※※※
③※※666888+※※※
3.Emergency key unlock
Remove the cover on the lock keypad, insert the emergency key to unlock the
door.
(Tip: You can place the key outside the door in case of equipment failure or
dead battery.)
4.Emergency power supply
The charge port is on the bottom of the front plate, micro usb
data connector is available to charge.
5. Anti-lock
The anti-lock button is under the knob on the back panel. After setting the
anti-lock, only the administrator can use the password, card or smart phone
to open the door.
6.Illegal intrusion alarm
When the user opens the door with the hijack password or enters the wrong
password three times in a row, the smart lock will alert.
※Follow the steps below to set the hijack password.

7.Low voltage alarm
If the voltage is lower than 4.6V, the lock will prompt and flash.
8.Reset to factory settings
Remove the back panel, press the reset button for 3 seconds. After
resetting, the administrator password changes to 666888, all data
will be deleted.

Contents list
Tools needed:
1.Screwdriver
2.Ruler
3.Pen
front panel
back panel
screw nut
latch
Cross recessed
tapping screws
Cross recessed
screws
fixing plate
strike plate
latch catch
battery cover
8.Reset to factory settings
Remove the back panel, press the reset button for 3 seconds. After
resetting, the administrator password changes to 666888, all data
will be deleted.

Adjust the length
New door:
1. Making 2 holes, one of 10mm, and the other of 55mm. The
distance between the two holes is 67.3mm.
2. Distance from the center of the door hole to the edge is
60/70mm.
3. Make a 1mm deep rectangular hole slot (L:58mm, W: 27mm) on
the side of the door, and then make a round hole with a diameter
of 25mm to punch through.
Old door:
If the door has already a deadbolt installed, follow instructions to
install new lock. Distance from the center of the door hole to the
edge of the door is 60/70mm measure to adjust the latch length.
◆ Adjust latch: you can do it by rotating, stretching or pressing back
to adjust from 60mm/70mm.
Installation

3. Install the latch, check that
the latch direction is correct. 4. Install the strike plate
Cross recessed
screws S74*24
Cross recessed
screws S74*24
direction
5. Make sure the direction of the
door is set correctly on the lock,
then install the front plate.

6.Install fixing plate 7. Install the back panel, please make
sure placement is correct.
Same direction
Cross recessed screw
M4*20 Cross recessed screw
M4*20
Battery cover

Smart Door Lock
OM7-B
User Manual
smartomniacrsmart.omnia
www.smartomnia.com