OMPHOBBY M2 User manual

INSTRUCTION MANUAL
使用说明书
Thank you for buying OMP HOBBY products.The M2 is the
latest technology in Rotary RC models.Please read this manual
carefully before assembling and flying the New M2 helicopter.
We recommend that you keep this manual for future reference
regarding and maintenance
感谢您选用边锋智驱系列产品。
进入遥控世界前必须告诉您许多相关的知识与注意事项，以确保您能够在学
习的过程中较得心应手。在开始操作之前，请务必详细阅读本说明书，相信
一定能够给您带来相当大的帮助，也请您妥善保管这本说明书，以作为日后
参考。
#1 BY DESIGN

2
遥控模型飞机、直升机属于高危险性商品，飞行时务必远离人群，人为组装不当或机件损坏，电子控制设备不良，以及操控上的不熟悉、都有可能导致
飞行失控损伤等不可预期的意外，请飞行者务必注意飞行安全，并需了解自负疏忽所造成的任何意外之责任。
Fly only in safe areas,away from other people. Do not operate R/C aircraft within the vicinity of homes or crowds of people .R/C aircraft are prone to
accidents,failures,and crashes due to a variety of reasons including,lack of maintenance,pilot error, and radio interference. Pilots are responsible for their
actions and damage or injury occurring during the poeration or as of a result of R/C aircraft models.
SAFETY NOTES 安全注意事项
模型商品属于需高操作技术且为消耗性之商品，如经拆装使用后，会造成不等情况零件损耗，任何使用情况所造成的商品不良或不满意，将无发于
保固条件内更换新品或者退货，如遇有使用操作维修问题，本公司全球分公司或者代理商将提供技术指导，特价零件供应服务。
遥控直升机并非玩具，它是结合了许多高科技产品所设计出来的休闲用品，所以商品的使用不当或者不熟悉都可能会造成严重伤害甚至死亡，
使用之前请务必详细阅读本说明书，勿轻忽并注意自身安全。
注意！任何遥控直升机的使用，制造商和经销商是无法对使用者于零件使用的损耗异常或组装不当所发生之意外负责任何责任，本产品是提供给
有操作过模型直升机经验的成人或者有相当技术的人员在旁指导于当地合法遥控飞行场飞行，以确保安全无误下操作使用，产品售出后该公司将
不负责任何操作和使用控制上的任何性能与安全责任。
We recommend that you obtain the assistance of an experienced pilot before attempting to fly our products for the first time, A lcoal expert is the best
way to properly assmble , setup, and fly your mldel for the first time .M2 Helicopter requires a certain degree of skill to operate, and is a consumer
item. Any damage or dissatisfaction as a result or accidents or modifications are not covered by any warrantee and cannot be returned for repair or
replacement. Please contact our distributors for free technical consultation and parts at discounted rates when you experience problems during
operation or maintenance.
R/C helicopters, including The M2 are not toys.R/C helicopter utilize various high-tech products and technologies to provide superior
performance.lmproper use of this product can result in serious injury or even death. Please read this manual carefully before using and make sure to
be conscious of your own personal safety and the safety of others and your environment when operating allOMPHOBBY products.
Manufacturer and seller assume no liability for the operation or the use of this product . lntended for use only by adults with experience flying remote
control helicopters at a legal flying field. After the sale of this product we cannot maintain any control over its operation or usage.
IMPORTANT NOTES 重要声明
Do not attempt under any circumstances
在任何禁止的环境下，请勿尝试操作。
Mishandling due to failure to follow these instructions may result in danger.
因为疏忽这些操作说明，而使用错误可能造成危险。
因为疏忽这些操作说明，而使用错误可能造成财产损失或严重伤害。
Mishandling due to failure to follow these instructions may result in damage or injury.
WARNING LABEL LEGEND 标志代表含义
感谢您选购边锋智驱公司产品，为了你容易方便使用 直升机，请您详细的阅读完这本说明书之后再进行组装以及操作这台直升机，同时请您妥
善保存这本说明书，作为日后进行调整以及维修的参考。
The M2 is a new product developed by OMPHOBBY. lt features the best design available on the Micro-Heli market to date, providing flying stability for
beginners,full aerobatic capbility for advanced fliers, and unsurpassed reliability for customer support.
Thank you for buying OMPHOBBY Products. The M2 Helicopter is designed as an easy to use,full featured Helicopter R/C model capable of all forms
of rotary flight. Please read the manual carefully before assembling the model, and follow all precautions and recommendations located within the
manual. Be sure to retain the manal for future reference, routine maintenance, and tuning.
INTRODUCTION 前言
WARNING
警告
!
!注意
CAUTION
禁止
FORBIDDEN
!注意
CAUTION
EN
是由边锋智驱有限公司自行研发的新产品，不论您是需求飞行稳定的初学者还是追求性能卓越的飞行爱好者。 将是您最佳的选择。
WWW.OMPHOBBY.COM

Beer
请于自己能力内及需要一定技术范围内操作这台直升机，过于疲劳，精神不佳或不当操作，意外发生风险将可能会提高。
Operate this unit within your ability.Do not fly under tired condition and improper operation may cause in danger
ALWAYS BE AWARE OF THE ROTATING BLADES 远离运转中的零件
SAFE OPERATION 安全操作
R/C models are made of various forms of plastisc.Plastic is very susceptible to damage or deformation due to extreme heat and clod climate .Make
sure not to store the model near any source of heat such as an oven,or heater.lt is best to store the model indoors ,in a climate-controlled,room
temperature environment.
KEEP AWAY FROM HEAT 远离热源
遥控飞机多半是以 纤维或聚乙烯、电子商品为主要材质，因此要尽量远离热源、日照、以避免因高温而变形甚至熔毁损坏的可能。
当直升机主旋翼与尾旋翼运转时，切勿触摸并远离任何物件，以避免造成危险及损坏。
During the operation of the helicopter,the main rotor and tail rotor will be spinning at a high rate of speed .The blades are capable of inflicting
serious bodily injury and damage to the environment.Be conscious of your actions,and careful to keep your face,eyes,hands,and loose clothing
away from the blades.Always fly the model a safe distance from yourself and others,as well as surrounding objects.Never take your eyes off the
model or leave it unattended while it is turned on.Immediately turn off the model and transmitter when you have landed model.
(Recommend you to practice with computer-based flight simulator.)
避免独自操控
至飞行场地前，需确认是否有相同频率的同好正在飞行，因为开启相同的频率的发射机将导致自己与他人立即干扰等意外危险。
The guidance provided by an experienced pilot will be invaluable for the assembly,tuning,trimming,and actual first flight.
Before turning on your model and transmitter,check to make sure no one else is operating on the same frequency.Frequency interference can
cause your model,or other models to crash.
OBTAIN THE ASSISTANCE OF AN EXPERIENCED PILOT
遥控飞机操控技巧在学习初期有着一定的难度，要尽量避免独自操作飞行，需有经验的人士在旁指导，才可以操控飞行。 勤练电脑模拟器及
老手指导是入门必要的选择
请确认于产品限界内操作，请勿过载使用，并勿用于安全、法令外其他非法用途。
PREVENT OPETATION 勿不当使用本产品
Please use the replacement of parts on the manual to ensure the safety of instructors.
This product is for R/C model,so do not use for other purpose.
请勿自行改造加工，任何的升级改装或维修，请使用三源电子科技产品目录中的零件，以确保结构的安全。
直升机内部也是由精密的电子零件组成，所以必须绝对的防止潮湿或水气 避免在浴室或雨天时使用，防止水气进入机身内部而导致机件及电
子零件故障而引发不可预期的意外！
It is crtical to keep the model and associated equipment away from moisture and other contaminants.The introduction or exposure to water or
moisture in any form can cause the model to malfuntion resulting in loss of use,or a crash .Do not operate or expose to rain or moisture
R/C models are composed of many precision electrical components.
PREVENT MOISTURE 远离潮湿环境
For the first practice,please choose a legal flying field and can use a training skid to fly for reducing the damage .Do not fly your model in
inclement weather,such as rain,wind snow or darkness.
Do not fly near buildings,high voltage cables ,or trees to ensure the safety of yourself,others and your model.
初次练习时，务必选择在空旷合法专属飞行场地并适当搭配练习架飞行，这对于飞行失误所造成的损伤将会大幅的降低。请勿在下雨天、打雷
等恶劣天气下操作，以确保本身及机体的安全。
必须注意周边有没有人、高楼、建筑物、高压电线、树木等等、避免操控的不当造成自己或与他人的财产损坏。
LOCATE AN APPROPRIATE LOCATION 远离障碍物及人群
R/C helicopters fly at high speed ,thus posing a certain degree of potential danger .Choose a legal flying field consisting of flat,smooth groumd
without obstacles.
直升机飞行时具有一定的速度，相对的也潜在着危险性，场地的选择也相对的重要，请遵守当地的法律法规到合法的遥控飞行场地去飞行。
禁止
FORBIDDEN
禁止
FORBIDDEN
禁止
FORBIDDEN
WARNING
警告
!
WARNING
警告
!
!注意
CAUTION
!注意
CAUTION
3EN
WWW.OMPHOBBY.COM
Precautions before use 使用前须知

六角螺丝起子
十字螺丝起子
When you see the marks as below,please use glue or greae to ensure flying safety.
剪刀 Scissors
刀子 Cutter Knife
斜口钳 Diagonal Cutting Pliers
尖嘴钳 Needle Nose Pliers
BLUE Glue width:approx 1mm
AB Glue AB胶CA瞬间胶
Oil润滑油
Hexagon Screw DriverPhilips Screw Drive
EQUIPMENT REQUIRED FOR ASSEMBLY 自备工具
胶水使用方法
2
Grease
Repeat Multiple Times
Apply BLUE Threadlock Apply Petroleum-Based,
Light Viscosity Lube
Loosely Tighten
Apply NO Threadlock Apply Synthetic
Grease
Fully Tighten
Apply MEDIUM CA
4
EN WWW.OMPHOBBY.COM
标有以下符号之组装步骤，请配合上胶或上油，以确保使用之可靠度。
使用螺丝胶
添加润滑油
普通拧紧
使用瞬间胶固定 重复多次
无需使用螺丝胶
添加润滑油脂
完全拧紧
蓝色螺丝胶上胶宽度约

Specifications 参数规格
Lenght：410mm
Specifications 参数配备
Height：130mm
Main Blade：173mm
Main Rotor Diameter：400mm
Tail Rotor Diameter：71.5mm
Flying Weight：300g
Features 设计特点
5EN
WWW.OMPHOBBY.COM
400
410
130
70
Direct drive main and tail rotor design with dual brushless motor
All metal 7075 aluminum alloy material flybarless head design
Airframe all carbon fiber lightweight design
Streamlined low wind resistance hood design
4 in 1 OFS control system
Attitude stabillization mode and 3D lock mode switch freely
机身长：410mm
机身高：130mm
主旋翼长度：173mm
主旋翼直径：400mm
尾旋翼直径：71.5mm
起飞重量约：300g
采用双无刷电机直接驱主尾旋翼设计
全金属7075铝合金材质无副翼旋翼头设计
机身全碳纤维轻量化设计
流线型低风阻机头罩设计
四合一OFS控制系统
姿态增稳模式和3D锁定模式自由切换

step 1 步骤一
!注意
CAUTION
止推轴承及横轴垫圈属于飞行消耗品，建议每 躺定期检查及更换，高主旋翼
转速飞行时，请缩短定期检查之趟数，以确保飞行安全。
圆柱头内六角螺丝(M1.6x4mm)x1
横轴避震套
(Ø2.95xØ5.95x2.9mm)x2
轴承面凹开口朝内
止推轴承-Ø3xØ6x2.8mm
主旋翼夹座
主夹头轴承衬套
Ø3xØ4.4x1.4mm
轴承
Ø3xØ6x2.5mm
(OUT)
内径较小 内径较大
(IN)
止推轴承(Ø3xØ6x2.8)
主旋翼夹座
!注意
CAUTION
原装组装完成品，每一次飞行前请先确认螺丝是否已上胶不会松动。
轴承(Ø3xØ6x2.5mm)x4
主夹头轴承衬(Ø3xØ4.4x1.4mm)x2
横轴轴承垫片(Ø3.1xØ4.5x0.1mm)x2
止推轴承(Ø3xØ6x2.8mm)x2
!注意
CAUTION
垫片(Ø3xØ5x0.6mm)x2
垫片(Ø2.1xØ5x0.2mm)x2
Grease
Grease
6
EN WWW.OMPHOBBY.COM
横轴轴承垫片(Ø3.1xØ4.5x0.1mm)x
Grease
金属主旋翼固定座
刹车碟
圆柱头内六角螺丝
M1.6x4mm
横轴Ø5x58mm
横轴避震套
Ø2.95xØ5.95x2.9mm
垫片-Ø3xØ5x0.6mm
Washer
垫片
Ø2xØ5x0.2mm
圆柱头内六角螺丝
M2x6mm
Socket screw
圆头内六角螺丝(M2x6mm)x2
轴承
Ø3xØ6x2.5mm
!注意
CAUTION
铜套台阶端面朝轴承方向
Bearing-MR63ZZ
Washer
Spindle bearing spacer
Thrust bearing0FM-6M
Obverse of bearing faces inside. Thrust braring and washer for radial bearing are wear items,and thus should be
inspected for replacement after every 20 flights.
For flights with high headspeed ,the inspection interval should be reduced to
ensure flight safety.
Bearing-MR63ZZ
Thrust bearing0FM-6M
Spindle bearing spacer
Main rotor holder
Washer
Bearing-MR63ZZ
Socket screw Washer
Socket screw Damper rubber-red
Washer
Socket screw
Brake Disc
Metal main rotor housing
Feathering shaft
Damper rubber
Washer
Pay attention to the direction
of the copper washer
Thrust bearing

7EN
WWW.OMPHOBBY.COM
step 2 步骤二
圆柱头内六角螺丝
M2.5x7mm
主电机固定座
主电机
沉头内十字螺丝
M1.6x3mm
十字盘相位板 十字盘相位板固定座
沉头内十字螺丝
(M1.6x3mm)x2
主轴固定环 基米螺丝M3X2.5
舵机固定座
圆柱头内六角螺丝
M1.6x6mm
圆柱头内六角螺丝
M1.6x4mm
滚珠轴承
(Ø4xØ9x4mm)x1
主轴同心度保持柱
圆柱头内六角螺丝(M2.5x7mm)x3
圆柱头内六角螺丝(M1.6x6mm)x2
圆柱头内六角螺丝(M1.6x4mm)x6
基米螺丝
(M3X2.5)x1
轴承(Ø4xØ9x3mm)x1
圆柱头内六角螺丝
M1.6x4mm
机身中间加强板
主轴
Main Shaft
Socket screw
Socket screw
Socket screw
Socket screw
Bearing-684ZZ
Socket screw
Socket screw
Socket screw
Socket screw
Socket screw
Motor Mount
Socket screw Socket screw
Metal Antl Rotation Bracket
Swash plate phase
plate mount
Main Motor
Spindle retaining ring
Steering gear mount
Bearing-684ZZ
Concentricity
retention column

8
EN WWW.OMPHOBBY.COM
step 3 步骤三
机壳固定柱
机身后加强板
圆柱头内六角螺丝
M1.6x4mm
机身上侧板
圆柱头内六角螺丝
M1.6x4mm
机身加宽固定座
圆柱头内六角螺丝
M1.6x3mm
尾管固定座
机壳固定柱
机身后加强板
圆柱头内六角螺丝
M1.6x4mm
圆柱头内六角螺丝
M1.6x3mm
机身加宽固定座
圆柱头内六角螺丝
(M1.6x3mm)x4
圆柱头内六角螺丝
(M1.6x4mm)x8
沉头内十字螺丝
M1.6x3mm
电池导轨
扁头内十字螺丝
M1.2x3mm
扁头内十字螺丝
M1.2x3mm
电池卡扣
扁头内十字螺丝
M1.2x3mm
机身右下侧板
机身左下侧板
沉头内十字螺丝
(M1.6x3mm)x6
Socket screw 扁头内十字螺丝
(M1.2x3mm)x6
Socket screw
沉头内十字螺丝
M1.6x3mm
飞控盒安装板
飞控盒安装板固定柱
机身上侧板
Canopy Support
Socket screw Socket screw
Socket screw
Socket screw
Socket screw
Socket screw
Socket screw
Canopy Support
Rear reinforcing plate
Frame upper side panel
Frame widening mount Tail Boom Mount
Frame upper side panel
Frame widening mount
Socket screw
Socket screw Socket screw
Socket screw
Socket screw
Frame lower right panel
Battery slideway
Flight control box mounting plate
Flight control box mounting plate assembly bolt
Frame lower left side panel
Battery buckle
Rear reinforcing plate

9EN
WWW.OMPHOBBY.COM
step 4 步骤四
圆柱头内六角螺丝
M1.6x4mm
圆柱头内六角螺丝
M1.6x3mm
底板
机身前加强板
机身前加强板
圆柱头内六角螺丝
M1.6x4mm
圆柱头内六角螺丝
M1.6x3mm
圆柱头内六角螺丝
(M1.6x3mm)x4
圆柱头内六角螺丝
(M1.6x4mm)x6
圆柱头内六角螺丝
M1.6x6mm
圆柱头内六角螺丝
M1.6x6mm
圆柱头内六角螺丝
(M1.6x6mm)x2
Socket screw Socket screw Socket screw
Socket screw
Socket screw
Socket screw
Socket screw
Socket screw
Socket screw
Fuselage front
reinforcement plate
Fuselage front
reinforcement plate
Frame upper side panel

10
EN WWW.OMPHOBBY.COM
step 5 步骤五
圆柱头内六角螺丝(M2x10mm-L2.5)x2
垫片(Ø2.1xØ3.6x0.2mm)x4
滚珠轴承(Ø2xØ5x2.5mm)x4
铜套(Ø2.xØ3.9x2.2mm)X2
滚珠轴承
Ø2xØ5x2.5mm
圆柱头内六角螺丝
M2x10mm-L2.5
垫片
Ø2.1xØ3.6x0.2mm
滚珠轴承
Ø2xØ5x2.5mm
主螺距控制臂
铜套Ø2.xØ3.9x2.2mm
垫片
Ø2.1xØ3.6x0.2mm
圆柱头内六角螺丝
M2x10mm-L4
M2防松螺母
圆柱头内六角螺丝(M2x10mm-L4)x1
M2防松螺母(M2)x1
半圆头内十字机械牙半牙螺丝
(M1.4x4-L2)x4
Socket screw
Socket screw
Socket screw
Washer
Flange bearing MF52ZZ
Copper sets
M2 Nut
Socket screw
Socket screw
Washer
Flange bearing MF52ZZ
Main Pitch Control Arm
Copper sets
Flange bearing MF52ZZ
Washer
M2 Nut
倾斜盘
Swash plate

11
EN
WWW.OMPHOBBY.COM
step 6 步骤六
圆柱头内六角螺丝
M1.6x3mm
圆柱头内六角螺丝
M1.6x3mm
圆柱头内六角螺丝
(M1.6x3mm)x8
圆柱头内六角螺丝
M1.6x3mm
圆柱头内六角螺丝
(M1.6x4mm)x2
圆柱头内六角螺丝
(M2x4mm)x4
M2螺丝套 X4
圆柱头内六角螺丝
M1.6x4mm
机壳卡扣
脚架固定座
脚架
M2螺丝套
圆柱头内六角螺丝
M2x4mm
Socket screw
Socket screw
Socket screw
Screw sleeve
Landing skid mount
Socket screw
Landing skid
Socket screw
Screw sleeve
Canopy latch
Socket screw
Socket screw
Socket screw

12
EN WWW.OMPHOBBY.COM
step 7 步骤七
6.5
圆柱头内六角螺丝
M1.6x3mm
尾电机固定座
尾电机
3K 碳纤维垂直翼
尾管
圆柱头内六角螺丝
M1.6x3mm
圆柱头内六角螺丝
M1.6x4mm
圆柱头内六角螺丝
(半牙，牙长4)
M1.6x12mm
圆柱头内六角螺丝
(M1.6x4mm)x1
圆柱头内六角螺丝
(M1.6x12mm-L4)x1
圆柱头内六角螺丝
M1.6x3mm
圆柱头内六角螺丝
(M1.6x3mm)x1
圆柱头内六角螺丝
(M1.6x3mm)x4
圆柱头内六角螺丝
(M1.6x12mm-L4)x2
圆柱头内六角螺丝
(半牙，牙长4)
M1.6x12mm
Socket screw Socket screw Socket screw
Tail Motor
Socket screw
Socket screw
Socket screw
Socket screw
Tail Motor Mount
Tail Boom
Socket screw Socket screw
3K CF Vertical Stabilizer

13
EN WWW.OMPHOBBY.COM
step 8 步骤八
球头(Ø3.175x3-M1.6)
圆头内十字螺丝
M1.6x4mm
舵机摆臂
M1.6螺母
全金属舵机
圆头内十字机械牙螺丝
(M1.6x4)x1
球头(Ø3.175x3-M1.6)x1
螺母(M1.6)x1
圆头内十字机械牙螺丝
(M1.6x4)x2
球头(Ø3.175x3-M1.6)x2 螺母(M1.6)x2
圆头内十字螺丝
M1.6x4mm
球头(Ø3.175x3-M1.6)
舵机摆臂
M1.6螺母
圆柱头内六角螺丝
M1.6x4mm
全金属舵机
圆柱头内六角螺丝
M1.6x4mm
球头(Ø3.175x3-M1.6)
舵机摆臂
M1.6螺母
圆头内十字螺丝
M1.6x4mm
全金属舵机
圆柱头内六角螺丝
M1.6x4mm
圆柱头内六角螺丝
(M1.6x3mm)x2
圆柱头内六角螺丝
(M1.6x4mm)x4
圆柱头内六角螺丝
M1.6x4mm
Socket screw
Socket screw
Linkage Ball
M1.6 Nut
Socket screw
Socket screw
Linkage Ball
Servo Arm
M1.6 Nut
Metal Servo
Linkage Ball
Socket screw M1.6 Nut
Socket screw
Metal Servo
Socket screw
Socket screw
Socket screw
Linkage Ball
Servo Arm
M1.6 Nut
Metal Servo
Socket screw Socket screw
M1.6 Nut
Servo Arm
Linkage Ball

14
EN WWW.OMPHOBBY.COM
step 9 步骤九
连杆约28.2mmx3
CH3 连杆
CH1 连杆
CH2 连杆
约28.2mm
约 10
飞控
双面胶
注意：先将双面减震胶与接收机板
完全贴合好，再安装飞控。飞控必
须与机身完全平行，以达到最佳的
飞行效果。
!注意
CAUTION
Linkage rod
Approx.28.2mmx3
CH2 Linkage rod
CH1 Linkage rod
CH3 Linkage rod
Flight Control
Double-sided tape
Note:Fist,the double-sided damping rubber
should be fully fitted with the receiver board,
and then install the flight control.The flight
control must be completely parallel to the
fuselage to achieve the best flight performance.

15
EN WWW.OMPHOBBY.COM
step 10 步骤十
圆柱头内六角螺丝
(M2x12mm-L4)x2
M2螺丝套
垫片
Ø2.1xØ10x0.3mm
主旋翼 M2防松螺母
圆柱头内六角螺丝
M1.6x6mm
尾旋翼
圆柱头内六角螺丝
(M2x12mm-L4)x2
M2防松螺母(M2)x2 M2螺丝套 x2 横轴轴承垫片
(Ø2.1xØ10x0.3mm)x4
圆柱头内六角螺丝
(M1.6x6mm)x2
M2 Nut Screw sleeve
Socket screw
Socket screw
M2 Nut
Screw sleeve
Washer
Washer
Main Blade
Socket screw
Socket screw
Tail Blade

电池固定板
魔术带
电池
将电池板两侧对准机身电池仓导
轨，用力推到底听到“咔”一声
表示到位。
16
EN WWW.OMPHOBBY.COM
step 11 步骤十一
魔术粘（勾状）
魔术粘（织毛状）
电池卡扣位置
Battery mount
Hook and loop tape（hooked）
Hook and loop tape（fuzzy）
Hook and loop tape
Battery
Align the sides of the panel with the
fuselage bettery compertment slideay, then
push it hard to hear a “click” to indicate that
it is in place.
Battery latch position

17
EN WWW.OMPHOBBY.COM
step 12 步骤十二
机头罩
机头罩橡胶固定圈
Canopy protector
Canopy

18
EN
WWW.OMPHOBBY.COM
step 13 步骤十三
CH1
CH2
CH3
天线
Antenna
负极
5V
数据
Data 3.3V
数据
Data
负极
MAIN MOTOR
SET
SERVO
PITCH
SPEED
AGILE
GYRO
RUDD
ELEV
AILE
LED
BIND
TAIL MOTOR
POWER
-EXPLORE
飞行参数设置说明
一般飞行模式
油门 螺距
560 100 11°
460 65 5.5°
360 15 1.8°
260 -5 -0.6°
10 -20 -2.4°
IDLE 1模式
油门 螺距
565 100 11°
465 50 5.5°
365 50.6°
265 -50 -5.5°
165 -100 -11°
油门 螺距
580 100 11°
480 50 5.5°
380 0 0°
280 -50 -5.5°
180 -100 -11°
模式
姿态模式/3D模式
模式 飞控LED
CH5
姿态模式 75-100
模式 0-25
蓝灯常亮
红灯常亮
蓝灯常亮
红灯慢闪
通电自检/对频
状态 飞控LED
上电自检
需将M2放在平地上通电，通
电后蓝灯、红灯快闪，静止3
秒钟直到蓝灯常亮
对频前
对频后 蓝灯常亮
蓝灯慢闪
舵机中位调整
调试前请先断开主尾马达电源线，避免安全隐患！
1.打开遥控器电源，给飞机通电，飞机自检过后可以正常控制舵
机工作状态；
2.将油门摇杆放到最低，升降舵摇杆推到最高直到飞控LED红灯快
闪；
3.将油门摇杆推到最高，此时可以分别通过副翼、升降、方向摇
杆调整对应舵机中位；
4.将油门摇杆拉到最低，升降舵摇杆推到最高直到红灯慢闪或常
亮，舵机中点保存完成。
在更换舵机，飞控，需要重新检查舵机中点。

配件编号:
配件名称:主轴中心座组
OSHM2001
配件编号: OSHM2006
Product name: Brake Disc Set
配件名称:刹车碟组
Product name: Servo Linkage Rod Set
配件名称:舵机连杆组
Product name: Main Motor Set(Orange)
配件名称:主电机组-(魔力橙)
Product name: Concentricity Retention Column Set
配件名称:同心度保持架组
19
EN WWW.OMPHOBBY.COM
Spare parts picture-1 配件 -1
横轴组 主夹头组 主桨夹螺丝组
配件编号: OSHM2005
Product name: Thrust Bearing
配件名称:平面推力轴承组
Product name: FBL Pros and Cons linkage rod
配件名称:主螺距控制臂组
Product name: Metal Main Rotor Housing set
配件名称:主轴固定环组
配件编号: OSHM2011
Product name: ɸ4 main Shaft Set
配件名称:主轴组
压好轴承
连杆与拉杆头组装好
压好轴承
Model: Package: Hang tag +PE bag
包装方式：吊卡+PE袋
OSHM2001
Product name: Metal Main Rotor Housing set
配件编号:
配件名称:
OSHM2002
Model: Package: Hang tag +PE bag
包装方式：吊卡+PE袋
OSHM2002
Product name:
配件编号:
配件名称:
OSHM2003
Model: Package: Hang tag +PE bag
包装方式：吊卡+PE袋
OSHM2003
Product name:
配件编号:
配件名称:
OSHM2004
Model: Package: Hang tag +PE bag
包装方式：吊卡+PE袋
OSHM2004
Product name:
Model: Package: Hang tag +PE bag
包装方式：吊卡+PE袋
OSHM2005 Model:
Package: Hang tag +PE bag
包装方式：吊卡+PE袋
OSHM2006
配件编号: OSHM2008
Model:
Package: Hang tag +PE bag
包装方式：吊卡+PE袋
OSHM2008
配件编号: OSHM2010
Model: Package: Hang tag +PE bag
包装方式：吊卡+PE袋
OSHM2010 Model: Package: Hang tag +PE bag
包装方式：吊卡+PE袋
OSHM2011
配件编号: OSHM2014
Model: Package: Hang tag +PE bag
包装方式：吊卡+PE袋
OSHM2014
配件编号: OSHM2015
Model: Package: Hang tag +PE bag
包装方式：吊卡+PE袋
OSHM2015
配件编号: OSHM2017
Model:
Feathering shaft set Plastics Main Rotor Holder set Main Rotor Holder Screw group
Package: Hang tag +PE bag
包装方式：吊卡+PE袋
OSHM2017
Ø2xØ5x0.2mm
M2x6mm
配件编号: OSHM2009
Product name: Swash plate set
配件名称:倾斜盘组
Model:
Package: Hang tag +PE bag
包装方式：吊卡+PE袋
OSHM2009
Product name: Fuselage Middle Reinforcement Plate Set
配件名称:机身中加强板组
配件编号：OSHM2023
Model:
Package: Hang tag +PE bag
包装方式：吊卡+PE袋
OSHM2023
配件编号: OSHM2028
Product name: Battery Panel Set
配件名称:电池板组
Model: Package: Hang tag +PE bag
包装方式：吊卡+PE袋
OSHM2028
配件编号: OSHM2030
Product name: Lithium BatterySet
配件名称:锂电池组
Model: Package: Hang tag +PE bag Model:
包装方式：吊卡+PE袋
OSHM2030
配件编号: OSHM2029
Product name: Battery Strap Set
配件名称:电池绑带组
Model: Package: Hang tag +PE bag
包装方式：吊卡+PE袋
OSHM2029
Product name: Tail Motor Set(Orange)
配件名称:尾电机组-(魔力橙)
配件编号: OSHM2037
Package: Hang tag +PE bag
包装方式：吊卡+PE袋
OSHM2037
配件编号: OSHM2038
Product name: Tail Screw Set(black)
配件名称:尾螺旋桨组-黑色
Model: Package: Hang tag +PE bag
包装方式：吊卡+PE袋
OSHM2038
Product name: Canopy Set(Charm Orange)
配件名称:机头罩--魔力橙
配件编号: OSHM2040
Package: Hang tag +PE bag
包装方式：吊卡+PE袋
OSHM2040
Model:
装好胶套

20
EN WWW.OMPHOBBY.COM
Spare parts picture-2 配件 -2
Product name: Canopy Set(Racing Yellow)
配件名称:机头罩--竞速黄
配件编号: OSHM2041
装好胶套
Model: OSHM2041
配件编号: OSHM2044
Product name: Shim Group
配件名称:垫片包组
Product name: Gross Shaft Suspension Set
配件名称:横轴避震套组
Model: Package: Hang tag +PE bag
包装方式：吊卡+PE袋
OSHM2044
配件编号: OSHM2045
Model: Package: Hang tag +PE bag
包装方式：吊卡+PE袋
OSHM2045
Product name: Flanged Bearing Set(MF52ZZ)
配件名称:凸缘轴承组(MF52ZZ)
配件编号: OSHM2047
Model: Package: Hang tag +PE bag
包装方式：吊卡+PE袋
OSHM2047
Product name: Ball Bearing Group (MR63ZZ)
配件名称:滚珠轴承组（MR63ZZ）
Product name: Ball Bearing Group (684ZZ)
配件名称:滚珠轴承组（684ZZ）Product name: Ball Bearing Group (6701ZZ)
配件名称:滚珠轴承组（6701ZZ）
配件编号: OSHM2048
Model: Package: Hang tag +PE bag
包装方式：吊卡+PE袋
OSHM2048
配件编号: OSHM2049
Model: Package: Hang tag +PE bag
包装方式：吊卡+PE袋
OSHM2049
配件编号: OSHM2050
Model: Package: Hang tag +PE bag
包装方式：吊卡+PE袋
OSHM2050
Product name: Flight Control Damping Shing Set
配件名称:飞控减震贴组
Product name: Battery Magic Tape Set
配件名称:电池魔术贴组
配件编号: OSHM2052
Model: Package: Hang tag +PE bag
包装方式：吊卡+PE袋
OSHM2052
配件编号: OSHM2053
Model: Package: Hang tag +PE bag
包装方式：吊卡+PE袋
OSHM2053
配件编号: OSHM2054
Product name: Pull Rod Head Set
配件名称:拉杆头组
Product name: Futaba Satellite Receiver
配件名称: futaba 卫星接收机
Model: Package: Hang tag +PE bag
包装方式：吊卡+PE袋
OSHM2054
配件编号: OSHM2055
Model: OSHM2055 Package: Hang tag +PE bag
包装方式：吊卡+PE袋
Product name: OMP HOBBY T6 Remote(MODE 1)
配件名称: OMP T6遥控器(MODE 1)
配件编号: OSHM2056
Model: Package: Hang tag +PE bag
包装方式：吊卡+PE袋
OSHM2056
Product name: OMP HOBBY T6 Remote(MODE 2)
配件名称: OMP T6遥控器(MODE 2)
配件编号: OSHM2057
Model: Package: Hang tag +PE bag
包装方式：吊卡+PE袋
OSHM2057
Product name: Canopy Rubber Ring Set
配件名称:机头罩橡胶圈组
配件编号: OSHM2059
Product name: Servo Swing Arm
配件名称:舵机摆臂
配件编号: OSHM2058
Model: Package: Hang tag +PE bag
包装方式：吊卡+PE袋
OSHM2058 Model: Package: Hang tag +PE bag
包装方式：吊卡+PE袋
OSHM2059
Product name: Main Motor Set(Racing Yellow)
配件名称:主电机组-(竞速黄)
配件编号: OSHM2063
Model: Package: Hang tag +PE bag
包装方式：吊卡+PE袋
OSHM2063
Product name: Tail Motor Set(Racing Yellow)
配件名称:尾电机组-(竞速黄)
配件编号: OSHM2065
Model: Package: Hang tag +PE bag
包装方式：吊卡+PE袋
OSHM2065
配件编号: OSHM2070
Product name: Ball Joint Set
配件名称:球头组
Model:
Package: Hang tag +PE bag
包装方式：吊卡+PE袋
OSHM2070
配件编号: OSHM2072
Product name: ESC Set
配件名称:电调组
Model: Package: Hang tag +PE bag
包装方式：吊卡+PE袋
OSHM2072
Product name: Main Rotor Support Frame Set
配件名称:主翼支撑架组
配件编号: OSHM2042
Model: OSHM2042 Package: Hang tag +PE bag
包装方式：吊卡+PE袋
Package: Hang tag +PE bag
包装方式：吊卡+PE袋