Omron STC-S133UVC-BL Installation instructions

No.17S021-01
STC-S133UVC
Product Specifications and User’s Guide 1/63
1.3M USB Camera
STC-S133UVC Color CMOS Cameras
STC-S133UVC-BL (1.3M / No lens mount / IR Cut Filter / Board)
STC-S133UVC-BLL (1.3M / M12 lens mount / IR Cut Filter / Board)
STC-S133UVC-BLCS (1.3M / CS mount / IR Cut Filter / Board)
STC-S133UVC-DBL (1.3M / No lens mount / Dual Pass Filter / Board)
STC-S133UVC-DBLL (1.3M / M12 lens mount / Dual Pass Filter / Board)
STC-S133UVC-DBLCS (1.3M / CS mount / Dual Pass Filter / Board)
STC-S133UVC-ALL (1.3M / M12 lens mount / IR Cut Filter / Cased)
STC-S133UVC-ALCS (1.3M / CS mount / IR Cut Filter / Cased)
STC-S133UVC-DALL (1.3M / M12 lens mount / Dual Pass Filter / Cased)
STC-S133UVC-DALCS (1.3M / CS mount / Dual Pass Filter / Cased)
Product Specifications and User’s Guide

No.17S021-01
STC-S133UVC
Product Specifications and User’s Guide 2/63
Table of Contents
1 Product Precautions .......................................................................................... 7
2 Warranty ............................................................................................................. 7
3 Introduction ........................................................................................................ 8
3.1 Features .................................................................................................................................... 8
3.2 Product Number Naming Method ........................................................................................... 8
4 Specifications .................................................................................................... 9
4.1 Electronic specifications ......................................................................................................... 9
4.2 Spectral Sensitivity Characteristics ..................................................................................... 11
CMOS Sensor Spectral Sensitivity Characteristics ....................................................................... 11
IR Cut Filter Spectral Sensitivity Characteristics (STC-S133UVC-BL / STC-S133UVC-BLL /
STC-S133UVC-BLCS / STC-S133UVC-ALL / STC-S133UVC-ALCS) .......................................... 12
Dual Pass Filter Spectral Sensitivity Characteristics (STC-S133UVC-DBL /
STC-S133UVC-DBLL / STC-S133UVC-DBLCS / STC-S133UVC-DALL /
STC-S133UVC-DALCS) .................................................................................................................. 12
4.3 Mechanical Specifications ..................................................................................................... 13
STC-S133UVC-BL / STC-S133UVC-DBL ........................................................................................ 13
STC-S133UVC-BLL / STC-S133UVC-DBLL .................................................................................... 13
STC-S133UVC-BLCS / STC-S133UVC-DBLCS ............................................................................... 13
STC-S133UVC-ALL / STC-S133UVC-DALL .................................................................................... 13
STC-S133UVC-ALCS / STC-S133UVC-DALCS ............................................................................... 14
4.4 Environmental Specifications ............................................................................................... 14
4.5 Connector specifications....................................................................................................... 15
STC-S133UVC-BL / STC-S133UVC-BLL / STC-S133UVC-BLCS / STC-S133UVC-DBL /
STC-S133UVC-DBLL / STC-S133UVC-DBLCS .............................................................................. 15
STC-S133UVC-ALL / STC-S133UVC-ALCS / STC-S133UVC-DALL / STC-S133UVC-DALCS ...... 15
4.6 To use the camera .................................................................................................................. 16
Windows system ............................................................................................................................. 16
Linux system ................................................................................................................................... 16
4.7 Other ........................................................................................................................................ 17
5 Dimensions ...................................................................................................... 18
5.1 STC-S133UVC-BL / STC-S133UVC-DBL ............................................................................... 18

No.17S021-01
STC-S133UVC
Product Specifications and User’s Guide 3/63
5.2 STC-S133UVC-BLL / STC-S133UVC-DBLL ........................................................................... 19
5.3 STC-S133UVC-BLCS / STC-S133UVC-DBLCS ..................................................................... 20
5.4 STC-S133UVC-ALL / STC-S133UVC-DALL ........................................................................... 21
5.5 STC-S133UVC-ALCS / STC-S133UVC-DALCS ..................................................................... 22
6 Communication control software users guide .............................................. 23
6.1 Requirement software ............................................................................................................ 23
6.2 Connecting configuration ...................................................................................................... 23
6.3 Communication settings........................................................................................................ 23
6.4 Basic operating procedure .................................................................................................... 24
6.5 The descriptions for the buttons .......................................................................................... 25
Read All............................................................................................................................................................................ 25
DSP -> FLASH ................................................................................................................................................................. 25
Reset................................................................................................................................................................................ 25
6.6 The descriptions of the functions ......................................................................................... 26
Menue .............................................................................................................................................................................. 26
Shutter/Gain Tab .............................................................................................................................................................. 27
Lens Tab .......................................................................................................................................................................... 30
OSD Tab .......................................................................................................................................................................... 32
WDR Tab .......................................................................................................................................................................... 34
AE Weight Tab ................................................................................................................................................................. 36
Normal AE Tab ................................................................................................................................................................. 37
Full ME Tab ...................................................................................................................................................................... 38
AE Mask Tab .................................................................................................................................................................... 39
WhiteBalance Tab ............................................................................................................................................................ 40
Gamma Tab ..................................................................................................................................................................... 42
Chroma Tab ..................................................................................................................................................................... 43
Other Tab ......................................................................................................................................................................... 44
Privacy Mask Tab ............................................................................................................................................................. 45
Day&Night Tab ................................................................................................................................................................. 47
Aperture Tab .................................................................................................................................................................... 48
Analog Tab ....................................................................................................................................................................... 48
Blemish Pixel Tab ............................................................................................................................................................ 49
Info. Tab ........................................................................................................................................................................... 49
Field Table........................................................................................................................................................................ 49
One Shot .......................................................................................................................................................................... 50
7 Camera setting by the OSD ............................................................................. 51

No.17S021-01
STC-S133UVC
Product Specifications and User’s Guide 4/63
7.1 OSD operation by camera control software ......................................................................... 51
OSD menu ....................................................................................................................................... 52
SETUP MENU .............................................................................................................................................................. 52
SHUTTER/AGC ........................................................................................................................................................... 53
WHITE BAL .................................................................................................................................................................. 54
PICT ADJUST .............................................................................................................................................................. 56
DEFOG......................................................................................................................................................................... 57
WDR/ATR ..................................................................................................................................................................... 58
Day/Night ..................................................................................................................................................................... 59
DNR.............................................................................................................................................................................. 59
PRIVACY ...................................................................................................................................................................... 60
LANGUAGE ................................................................................................................................................................. 61
CAMERA RESET ......................................................................................................................................................... 61
SAVE ALL ..................................................................................................................................................................... 61
8 Revisions History ............................................................................................ 62

No.17S021-01
STC-S133UVC
Product Specifications and User’s Guide 5/63
Precautions for safe use
Please read carefully this “Precautions for safe use” before use the camera. Then the camera uses correctly with
agreeing with below notes.
In this “Precautions for safe use”, notes divides into “Warning” and “Caution” to use the camera safety and prevent to
harm and damage.
Warning This shows, assumption for possibility of serious accident leading death or
serious injury if ignore this note and camera uses incorrectly.
Caution This shows, assumption for possibility of bear the damage or physical
damage if ignore this note and camera uses incorrectly.
About Graphic
symbols This symbol shows general prohibition.
This symbol shows completion or instruction.
[Environment / condition]
Warning
Do not use flammable or explosiveness
atmospheres.
This will cause of personal injury or fire.
Do not use for “safety for human body” related
usage.
This camera is designed for use “do not harm
human body immediately” if by any chance the
camera has malfunction.
Caution
Use and store under specified environmental
conditions (Vibration, shock, temperature,
humidity) in the specifications for this camera.
This will cause of fire or damage the camera.
[Installation and cable wiring]
Warning
Do not use with out of power voltage range
that is specified in the specifications for this
camera.
This will cause of fire, electrification or
malfunction.
Do not wrong wiring.
This will cause of fire or malfunction.

No.17S021-01
STC-S133UVC
Product Specifications and User’s Guide 6/63
Caution
Do not grounding DC power (+) of all devices
that are connect to the camera.
The camera housing is connecting to 0 V line of
camera inside circuit.
There is a risk of short circuit between camera
inside ciurcuit and frame ground.
This will cause of malfunction.
It is necessary to wiring and mounting that is
specified in the specifications for this camera.
This will cause of fire or malfunction.
It is necessary to wiring with turn off the camera.
This will cause of electrification or malfunction.
It is necessary to mounting the camera without
stress for the cable.
This will case of electrification or fire.
[Usage instruction]
Warning
Do not touch the terminal and PCB board
While turn on the camera.
This will cause of electrification or accident
caused by malfunction.
Do not put combustibles near the camera.
This will cause of fire.
Do not use without usage that is specified in
the specifications for this camera.
This will cause of personal injury or malfunction.
Do not push metals including screw driver into
radiation holes.
This will cause of electrification or malfunction.
Caution
Do not push contamination into opening of
the camera.
This will cause of electrification or malfunction.
Do not block the radiation holes.
This will cause of fire due to increase the
camera inside temperature.
[Maintenance]
Caution
Do not disassemble or repair the camera.
This will cause of fire, electrification or
malfunction.
It is turn off the camera when maintaining or
inspecting the camera.
This will cause of electrification.
[Disposal]
Caution
It is necessary to dispose as industrial waste.

No.17S021-01
STC-S133UVC
Product Specifications and User’s Guide 7/63
1 Product Precautions
 Do not give shock to the camera.
 Do not haul or damage the camera cable.
 Do not wrap the camera with any material while using the camera. This will cause the internal camera
temperature to increase.
 When the camera moving or using the place that temperature difference is extreme, countermeasure for
dew condensation (heat removal / cold removal) is necessary.
 While the camera is not using, keep the lens cap on the camera to prevent dust or contamination from getting
in the sensor or filter and scratching or damaging it.
Do not keep the camera under the following conditions.
・ In wet, moist, high humidity or dusty place
・ Under direct sunlight
・ In extreme high or low temperature place
・ Near an object that releases a strong magnetic or electric filed
・ Place with strong vibrations
 Apply the power that satisfies the specified in specifications for the camera.
 The defective pixels may appear due to the sensor characteristics.
 Use below recommend materials (or equivalent materials) to clean the surface of glass.
・ Air dust: Non Freon air duster (NAKABAYASHI Co., LTD.)
・ Alcohol: Propan-2-ol (SAN’EI KAKO Co., LTD.)
・ Non-woven: nikowipe clean room (NKB)
 Use a soft cloth to clean the camera.
2 Warranty
■Warranty period
One year after delivery (However, the camera had malfunction with camera uses correctly)
In below case for a fee even within warranty period.
・The malfunction caused by incorrect usage, incorrect modify or repair.
・The malfunction caused by external shock including the camera dropping after delivery the camera.
・The malfunction caused by fire, earthquake, flood disaster, thunderbolt struck, other natural disaster or
wrong voltage.
■Warranty coverage
Exchange or repair the malfunction camera if the malfunction is occurred by our responsibility.
“Warranty” mean is warranty for the delivered camera itself. Please accept the induction damage by the
camera malfunction is not included.

No.17S021-01
STC-S133UVC
Product Specifications and User’s Guide 8/63
3 Introduction
This document describes the specifications of the following cameras
STC-S133UVC-BL / STC-S133UVC-BLL / STC-S133UVC-BLCS (IR Cut Filter, Board models)
STC-S133UVC-DBL / STC-S133UVC-DBLL / STC-S133UVC-DBLCS (Dual Pass Filter, Board models)
STC-S133UVC-ALL / STC-S133UVC-ALCS (IR Cut Filter, Cased models)
STC-S133UVC-DALL / STC-S133UVC-DALCS (Dual Pass Filter, Cased models)
3.1 Features
・USB3.0 USB Video Class 1.1 compliant
・1/3.2” 1.27M CMOS Sensor (Sony, ISX017)
・Small camera
・Gain, shutter and color adjustment functions
・Flip image function
・Day / Night function
・Lens vignetting and distortion correction
・Shading correction
・Configurable many parameters through the control software
・Wide dynamic range (ATR-EX) and defog function
・Pixel blemish correction
・OSCD (On Screen Character Display) is available for the parameters configuration (OSD)
3.2 Product Number Naming Method
STC-S133UVC-xBL
UVC: USB Video Class
BL: Angle USB, No lens mount, Board
BLL: Angle USB, M12 lens mount, Board
BLCS: Angle USB, CS mount, Board
ALL: Angle USB, M12 lens mount, Cased
ALCS: Angle USB, CS mount, Cased
Optical Filter
None: IR Cut Filter
D: Dual Pass Filter

No.17S021-01
STC-S133UVC
Product Specifications and User’s Guide 9/63
4 Specifications
4.1 Electronic specifications
Default: Bold
Model Number STC-S133UVC-BL / STC-S133UVC-BLL / STC-S133UVC-BLCS /
STC-S133UVC-DBL / STC-S133UVC-DBLL / STC-S133UVC-DBLCS
STC-S133UVC-ALL / STC-S133UVC-ALCS / STC-S133UVC-DALL / STC-S133UVC-DALCS
Image sensor 1/3.2" 1.27M Progressive CMOS (SONY ISX017)
Video signal format USB3.0 1,280 (H) x 720 (V) 60 / 50 / 30 / 25 fps, 1,280 (H) x 960 (V) 30 / 25 fps
(Default: 1,280 (H) x 720 (V) 60 fps)
USB2.0 800 (H) x 600 (V) 25 fps, 640 (H) x 480 (V) 30 / 25 fps with image center ROI output
(Default: 800 (H) x 600 (V) 25 fps)
Chip size USB3.0 4.48 (H) x 2.52 (V) mm (1,280 (H) x 720 (V)) /
4.48 (H) x 3.36 (V) mm (1,280 (H) x 960 (V))
USB2.0 2.80 (H) x 2.10 (V) mm (800 (H) x 600 (V)) /
2.24 (H) x 1.68 (V) mm (640 (H) x 480 (V))
Cell size 3.5 (H) x 3.5 (V) µm
Shutter type Rolling shutter
Sensitivity (*1) 220 Lux
Sync system Internal
Compliant standard USB3.0 / USB2.0
USB Video Class (UVC) 1.1
Communication Device Class (CDC)
Support OS Windows 7,10 / Linux (Ubuntu, CentOS)
Camera
functions
Adjustable functions with
UVC Viewer
Adjustable functions with communication
Electronic shutter 1/60 to 1/10,000 seconds
Auto
(Auto only for USB2.0)
1/60 (1/50) to 1/605,000 seconds Auto / Fixed
Gain AGC only AGC / Fixed gain 0 to 40 dB
White balance Auto White Balance only Auto white balance / Manual / Push to set
Image flip Horizontal and vertical flip
only
Normal / Horizontal flip / Vertical flip / Horizontal and vertical flip
Gamma N/A Manual / Straight
Privacy masking N/A 16 frames (Color, size and position are adjustable individually)
(Default: Off)
Color adjustment Hue and saturation are adjustable
Image adjustment Brightness and contrast are adjustable
Day / Night N/A Support
Lens correction N/A Vignetting, distortion and shading correction
Others Back light compensation /
Flicker correction
Pixel blemish correction / WDR /
Defog / Back light compensation /
Flicker correction /
High brightness correction /
Noise reduction (2D) / Negative/Positive image /
False color correction
Communication N/A UART communication by CDC 115,200bps
OSD Available for USB3.0 connection with CDC
Interface USB3.0 micro B type connector
Power Input voltage +5 V USB Bus power
Consumption Max: 1.0W, Typical 0.8 W

No.17S021-01
STC-S133UVC
Product Specifications and User’s Guide 10/63
Precautions
(*1) The sensitivity is measuring the luminance when white level achieved 100 % in below conditions.
Camera Setting Environment
Parameter Setting Parameter Setting
Gain Up 0 dB Light Source Light Box (White)
AGC Off Color temperature 5,100K
White Balance Optimum Lens
Electrical Shutter 1/30 seconds F on Lens F5.6
Black Level Optimum Target Luminance IM-600 (Topcon)
Gamma Factory Setting

No.17S021-01
STC-S133UVC
Product Specifications and User’s Guide 11/63
4.2 Spectral Sensitivity Characteristics
CMOS Sensor Spectral Sensitivity Characteristics

No.17S021-01
STC-S133UVC
Product Specifications and User’s Guide 12/63
IR Cut Filter Spectral Sensitivity Characteristics
(STC-S133UVC-BL / STC-S133UVC-BLL / STC-S133UVC-BLCS /
STC-S133UVC-ALL / STC-S133UVC-ALCS)
Dual Pass Filter Spectral Sensitivity Characteristics
(STC-S133UVC-DBL / STC-S133UVC-DBLL / STC-S133UVC-DBLCS /
STC-S133UVC-DALL / STC-S133UVC-DALCS)
0
10
20
30
40
50
60
70
80
90
100
350 450 550 650 750 850 950 1050 1150
Transmittance (%)

No.17S021-01
STC-S133UVC
Product Specifications and User’s Guide 13/63
4.3 Mechanical Specifications
STC-S133UVC-BL / STC-S133UVC-DBL
(*1) Excluding projection
STC-S133UVC-BLL / STC-S133UVC-DBLL
(*1) Excluding projection
STC-S133UVC-BLCS / STC-S133UVC-DBLCS
(*1) Excluding projection
STC-S133UVC-ALL / STC-S133UVC-DALL
(*1) Excluding projection
Model Number STC-S133UVC-BL STC-S133UVC-DBL
Dimensions (*1) 23 (W) x 20 (H) x 15.1 (D) mm
Optical Filter IR Cut Filter built in Dual Pass Filter built in
Lens Mount No lens mount
Camera Mounting M2 screw holes (Four on front, two on top and bottom plate)
Weight Approximately 8 g
Model Number STC-S133UVC-BLL STC-S133UVC-DBLL
Dimensions (*1) 25 (W) x 22 (H) x 24.5 (D) mm
Optical Filter IR Cut Filter built in Dual Pass Filter built in
Lens Mount M12 x P0.5
Camera Mounting M2 screw holes (Four on front, two on top and bottom plate)
Weight Approximately 13 g
Model Number STC-S133UVC-BLCS / STC-S133UVC-DBLCS
Dimensions (*1) φ28 x 21.7 (D) mm
Optical Filter IR Cut Filter built in Dual Pass Filter built in
Lens Mount CS mount
Camera Mounting M2 screw holes (Tow on Top and bottom plate)
Weight Approximately 12 g
Model Number STC-S133UVC-ALL STC-S133UVC-DALL
Dimensions (*1) 25 (W) x 25 (H) x 18 (D) mm
Optical Filter IR Cut Filter built in Dual Pass Filter built in
Lens Mount M12 x P0.5
Camera Mounting M2 screw holes (Four on front plate)
M2.5 screw holes (Two on Top, bottom and both side plate)
Weight Approximately 23 g

No.17S021-01
STC-S133UVC
Product Specifications and User’s Guide 14/63
STC-S133UVC-ALCS / STC-S133UVC-DALCS
(*1) Excluding projection
4.4 Environmental Specifications
Model Number STC-S133UVC-BL / STC-S133UVC-BLL / STC-S133UVC-BLCS /
STC-S133UVC-DBL / STC-S133UVC-DBLL / STC-S133UVC-DBLCS /
STC-S133UVC-ALL / STC-S133UVC-ALCS / STC-S133UVC-DALL / STC-S133UVC-DALCS
Operational Temperature / Humidity Environmental Temperature: 0 to +55 deg. C,
Environmental Humidity: 0 to 80 %RH (No condensation)
Storage Temperature / Humidity Environmental Temperature: -25 to +75 deg. C,
Environmental Humidity: 0 to 80 %RH (No condensation)
Vibration 20 Hz to 200 Hz to 20 Hz (5 min. / cycle), acceleration 10 G, XYZ 3 directions 30 min. each
Shock Acceleration 38 G, half amplitude 6 ms, XYZ 3 directions 3 times each
RoHS RoHS Compliant
Model Number STC-S133UVC-ALCS / STC-S133UVC-DALCS
Dimensions (*1) 25 (W) x 25 (H) x 25.6 (D) mm
Optical Filter IR Cut Filter built in Dual Pass Filter built in
Lens Mount CS mount
Camera Mounting M2.5 screw holes (Two on Top, bottom and both side plate)
Weight Approximately 24 g

No.17S021-01
STC-S133UVC
Product Specifications and User’s Guide 15/63
4.5 Connector specifications
STC-S133UVC-BL / STC-S133UVC-BLL / STC-S133UVC-BLCS / STC-S133UVC-DBL /
STC-S133UVC-DBLL / STC-S133UVC-DBLCS
STC-S133UVC-ALL / STC-S133UVC-ALCS / STC-S133UVC-DALL / STC-S133UVC-DALCS
Bottom of camera
USB3.0 micro B type
USB3.0 micro B type

No.17S021-01
STC-S133UVC
Product Specifications and User’s Guide 16/63
4.6 To use the camera
Windows system
Requirement software
1) Camera control software: KSACtrl (version 2.02 or newer)
2) OSD software: S133Control
(The camera settings are changeable with on screen display)
* UVC camera supported viewer software (UVC Viewer) is required to obtain the image.
Software installation
CDC driver for communicate to the camera, install before camera connects to the PC.
Please follow below procedure.
1) Install KSACtrl.
2) Install CDC driver by selecting “Install CDC driver” under “KSACtrl” under “Sentech” at Program menu.
Please select correct installer from 32bits (x86) or 64bit (x64).
* CDC driver is installing automatically when the camera connecting to the Windows10 PC.
(CDC driver manual install is not necessary)
3) The driver is installing automatically when the camera connects to PC after installed CDC driver.
The driver installing may take few minutes.
4) The camera disconnects from PC after installing the driver correctly.
5) The camera connects to PC.
The image can obtain by UVC Viewer and camera settings are changeable from KSACtrl or OSD software
(S133Control)
Linux system
We’ve confirm the image with Cheesa and Guvcview on Ubuntu and CentOS Linux.
The camera settings are changeable from OSD software (S133Ctrol)

No.17S021-01
STC-S133UVC
Product Specifications and User’s Guide 17/63
4.7 Other
When the camera connecting to USB2.0 port, the center ROI image is output and field of view becomes narrow.
When the camera connecting to USB2.0 port, the image stream may stop while camera settings are adjusting.
USB3.0 1,280 (H) x 720 (V): 60 / 50 / 30 / 25 fps, 1,280 (H) x 960 (V): 30 / 25 fps
USB2.0
800
(H)
x
600
(V) 25
fps
,
640 (H) x
48
0
(V)
:
30
fps / 25
fps
*
with the image center ROI output

No.17S021-01
STC-S133UVC
Product Specifications and User’s Guide 18/63
5 Dimensions
5.1 STC-S133UVC-BL / STC-S133UVC-DBL
Unit: mm
Optical Filter
4.87 (in Air)
Image
(14.1)
11.5
6
1
φ23
4-M2 Depth2.5
4-M2 Depth2.5
(2-M2 on other side)
14
8
9.3
(10)
φ15.5
20
14
2.5
(12.85)

No.17S021-01
STC-S133UVC
Product Specifications and User’s Guide 19/63
5.2 STC-S133UVC-BLL / STC-S133UVC-DBLL
Unit: mm
8.4
M12 X P0.5
(16.1)
φ25
13.5
8
1.2
Optical Filter
4-M2 Depth3.0
16
8
9.3
φ16.5
φ15
22
15
4
(14.85)
4-M3 Depth3.0
(2-M3 on other side)

No.17S021-01
STC-S133UVC
Product Specifications and User’s Guide 20/63
5.3 STC-S133UVC-BLCS / STC-S133UVC-DBLCS
Unit: mm
Optical Filter
CS mount
(21.7)
19.1
13.6
7.6
4-M2 Depth2.5
(2-M2 on other side)
8
9.3
φ28
(2.5)
(20.45)
10.1
φ23
20
M2 Screw plate