OMUARK Smart Safe OX User manual

USER MANUAL
Smart Safe OX

What’s Included
P. 1
Smart Safe OX x 1
Mechanical Key × 1
M6 Screw Driver×1
M6 Wall-Mount Screw×2
Reset Tool×1
Embedding Screw×2

Specification
Model
Unlock Mechanism
Battery
Material
Bluetooth, PIN Code, App, Mechanical Key
P. 1
OX
Galvanized steel
4×AA Battery
P. 2
285mm
400mm
300mm

Lock&Unlock
Emergency
Battery
Mobile Control
Burglar Alarm
Administrator Unlock
.......
User Unlock
This Smart Safe allows to add up to 200 user PIN
codes for your family and friends.
Bluetooth one-touch unlock Remote Sharing
Mobile Administrator
With your Mobile you could unlock the Safe by
tapping the ” ” on the App.
You could generate offline code through mobile App and
let your friends and family access the Safe.
Set Administrator PIN Codes from your Mobile to
unlock, add users, delete users, etc.
Battery Life
The battery lifetime will be 12 months for operating.
Low Battery
When the battery runs out of power, system
will remind you to replace the batteries.
When the power is down, we can use
Mechanical Key to open the Safe.
Emergency Unlocked
Set a Master Administrator PIN for Unlocking,
settings, operations etc. And only the administrator
could change the administrator PIN code.
System Lockdown
The lock will be lockdown for 5 minutes
if continuously enter wrong PINs for 5 times.
AA A
AA A
AA A
AA A
Low Consumption
BLE broadcasting turns to sleep mode if no
operations.
The alarm will be activated if anyone move the Safe,
and the High decibel buzzer will be turned on and
keep beeping.
Features
P. 2
P. 3

>. Please use the 2 wall mounting screws to fix the safe on your wall or cabinet.
Installation
P. 3
P. 4
Quick Start
Step 1>Install Battery
>. Put 4 × AA Battery into the battery dock.

P. 4
P. 5
Step 3>Add Device
>1. Scan QR Code below and download the App and turn on your mobile Bluetooth
>1. Go to App Home page, click “Add Device” or click “+” on the upper right.
Step 2>Download Mobile App

P. 5
P. 6
> 2. Tap + 9 + + admin code + , when you see the light slowly blinks in blue then you are ready to pair

P. 6
P. 7
>3. You will see the detected device and click “Go to add”.
Smart Safe

P. 7
P. 8
>4. Connecting, you need to wait for a few seconds to let it finish.
>5. Device added
Smart Safe
Smart Safe

P. 8
P. 9
Step 4>Change Admin Password-Initial Admin Password:123456
>1. Tap and hold for 3 seconds and release, you will be hearing 2 quick beeps.
>2. Right after the 2 beeps please key in:
Initial admin code+ + new admin code+ +new admin code again+ , when you hear a long beep with green light the admin
code has been changed.

Tap + 00000 + until the blue light blinks
>. Enter admin password and press
>. When the (Enter button) blinks in green, all user passwords have been deleted.
P. 9
P. 10
Mechanical Instructions
Password & Factory Mode:
Bluetooth broadcasting & re-connecting:
Tap any key to activate the Bluetooth, App&Device will get reconnected each other.
Password must be 6 digits (no more or less)
1. Password Length
Bluetooth will turn to sleep mode and lights out if no operations within 1 minute.
2. Add User Password
3. Delete Password
5. System Lock-down
The Smart Safe will Lock-down for 5 minutes if entering wrong password continuously 5 times.
4. Delete All Passwords
Tap + 0 + until the blue light blinks
>. Enter admin password +
>. Enter new user password +
>. Enter new user password again and press
>. When the (Enter button) blinks in green, user password has been set.
Tap + 2 + until the blue light blinks
>. Enter admin password and press
>. Enter the user password you wish to delete and press
>. Enter the user password again and press
>. When the (Enter button) blinks in green the password has been deleted.
7. Reset Factory Mode
Use the reset tool press and hold the reset button for 5 seconds until a long beep.
6. Virtual digits-Anti Peeping
Add any digits before and after the correct password the Safe unlock as always.

P. 10
P. 11
App Instructions
You will see all devices and rooms on the home page.
Tap the Device to start operating.
Tap “Me” at the bottom to manage your home.
Touch the lock sign to unlock and lock.
Tap to check the alarm records.
Tap “Members” to add or delete members.
Tap “Opening Logs” to check opening logs.
Tap “Intelligent Linkage” to turn on and off go home mode.
Tap “Setting” to manage passwords.
Smart Delivery Box

P. 11
P. 12
Tap “Get dynamic code” to get a code.
Tap “Copy Code” and send it to friend or family.
Tap to edit your personal information.
Tap “+” to add family member or others.
Tap added members to edit member’s information.

P. 12
P. 13
You will find out when and whom opened the Safe.
Tap the green bar and save to turn on the function.
Tap the orange bar and save to turn on the function.
You will get notification if user unlocked with Bluetooth
Go to “Me” homepage and go to message center to
check the records.

P. 13
P. 14
Tap “Member” to manage members’ information.
Tap “Temporary Code” to manage on-line and off-line codes.
Tap “One-Time Password” under Online Password to
set an on-line one-time code.
Tap “Add Online Periodic Code” under Online Code to set
an on-line code which will be available in a period of time.
Tap “One-Time Password” under Off-line Password to
generate an one-time off-line code which will be a 10 digits
code and use it when the device is off-line.
Tap “Add Off-line Periodic Code” under Off-line Code to
generate an off-line code (10 digits) which will be available
for a period of time, and use it when the device is off-line or
Bluetooth disconnected with device.
Tap “Clear Code” to generate a code (10 digits) which will
be able to clear single or all the off-line codes.
Please note if the code less than 10 digits you need to
regenerate a new code, the code must be 10 digits.

P. 14
OMUARK
www.omuark.com
31 Building, Shahe Rd, Longgang District, Shenzhen 518115, China Copyright @ 2016 - 2022 OMFOCUS TECH. All rights reserved.