One Remote RMB4 User manual

Setup Guide
35104403s1uk
OneRemote RMB4
Converter for Beo4
Type 35104406 controls
Loewe TV
all TV models

1
www.oneremote.dk
Setup Guide for OneRemote RMB4 Converter
With a OneRemote RMB4 converter installed in your Bang & Olufsen Beo4 remote control
terminal you may control any Loewe TV with that terminal. This guide explains alternative setting
options.
There are 4 manuals for this modified Bang & Olufsen Beo4 remote control:
User manual TV
When your Beo4 has a Okey. .
User manual TV
When your Beo4 has a =key.
User manual Apple
All Beo4 models
Setup Guide
Setting options
Installation guide
Installing the converter in the Beo4.
Zap Mode
When the RMB4 converter is used in a Beo4 with a Okey, the colored keys have been given alternative
functions, lacking available vacant Beo4 keys for just these functions. Program stepping can be set to use
one of two different set of of keys by entering one of the following options:
Zap Mode Options Table.
Enter one of these 2 option sequences within 10 seconds to set the preferred Program Zap mode keys.
Lmq90w
The Wand Rkeys = manoeuvring up/ down.
The D and F keys = program zapping.
Lmq91w
The Wand Rkeys = program zapping.
The D and F keys = manoeuvring up/ down.

2
www.oneremote.dk
Setting the OneRemote Volume Option
When the tkey is pressed, the TV powers up
automatically and is turned on in the TV mode.
If a Bang & Olufsen audio master is in the room, it is
possible to use it and its speakers for handling the TV
sound.
The options in the table below determine how the One
Remote RMB4 handles the volume control.
These options also allow for the powering up of B&O
devices, when tis selected. The audio output
from the TV must be wired to the audio master input
using a Line to DataLink or Line to RCA Phono plugs
cable. Moving the TV sound to the speakers of the
audio master improves the sound quality significantly.
Volume Options
Enter one of these option sequences within 10 seconds:
Sound Destination
Alternative speakers.
Volume Control
Volume emitted from Beo4.
Lmq00w
Volume disabled
No volume control
Lmq01w
The Loewe TV
Loewe format
Lmq02w
B*1
Bin B&O format
Lmq03w
c*2
cin B&O format
*1 When tis pressed the Beo4 sends a Power On command to the TV. At the same time the Beo4 sends an B
command to a Bang & Olufsen audio master. Until another source is selected, volume commands will be directed to the B&O
audio master.
*2 When tis pressed the Beo4 sends a Power On command to the TV. At the same the Beo4 sends a ccommand to
a Bang & Olufsen system. Until another source is selected, volume commands will be directed to the B&O system. Via a BeoLink
Active sound may be moved from the TV to B&O PowerLink speakers.