OneTouch Verio Flex User manual

Turn it on
Press and hold until the
start-up screen appears.
Quick Start Guide
OneTouch Verio Flex™ Blood Glucose
Monitoring System 1Set the time and date on your meter
Use this guide to get to know your meter, and follow the steps
inside to get started.
IMPORTANT: Please read the Owner's Booklet that came
with your system.
Set the time on the first SET screen
> Hour flashes. Press if correct
or edit and confirm.
> Minutes flash. Press if correct
or edit and confirm.
> AM/PM flashes. Press if
correct or edit and confirm.
2Take a test
Insert a test strip (gold side and
2 silver prongs facing you) to
turn the meter on.
Flashing blood drop
appears.
Apply blood sample to the
channel on either side of
the test strip. Wait for the
channel to fill.
The channel turns red and
the meter counts down
from 5 to 1.
Use buttons to edit each
setting and press to confirm.
Set the date on the next SET screen
> Year flashes. Press if correct
or edit and confirm.
> Month flashes. Press if
correct or edit and confirm.
> Day flashes. Press if correct
or edit and confirm.
Ready to test
Your meter setup is complete when
the screen with 3 dashes appears.
AW 07029902A

3View your reading 4Optional: Connect to a mobile device About the Range Indicator
Example of an In Range reading
Your reading appears on the display. The Range Indicator arrow
points to the blue, green, or red Range Indicator colour bar, to let
you know your reading is below, within, or above your range limit.
Example of a Below
Range reading
Example of an Above
Range reading
Your meter comes with Bluetooth® Smart technology. This allows
you to wirelessly send your readings to a mobile device such as a
phone or a tablet, where you can view and graph them.
To learn more about using your meter's wireless feature and
view a complete listing of compatible devices and software
applications, visit us at www.onetouchdiabetes.co.in.
Connecting your meter
Press and at the same time to turn the Bluetooth® feature
on and o. When prompted by your mobile device, enter the PIN
shown on your meter into your device.
The symbol means
Bluetooth® is on.
Example of a PIN number.
Meter power
Low battery
Battery empty
Control solution
Syncing
Bluetooth® feature on
History Mode (past readings)
Apply sample
Range Indicator arrow
Setting mode
Your meter comes with a Range Indicator that automatically lets
you know if your reading is below, above or within your range
limits. The high and low range limits used by the Range Indicator
are pre-set as follows:
Pre-set low range limit Pre-set high range limit
For details about changing the pre-set range limits to suit your
needs, refer to your Owner's Booklet.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc., and any use of such marks by LifeScan Scotland Ltd. is under
license. Other trademarks and trade names are those of their respective owners.
Meter symbols
Manufactured by:
LifeScan Europe GmbH
Gubelstrasse 34
6300 Zug
Switzerland
Rev. Date:
© 2015-2019 LifeScan, Inc.
06/2019
AW 07029902A
Kindly contact Customer Service
at 1800 225544 or visit
www.onetouchdiabetes.co.in.