OneTouch Verio Flex User manual

Quick Start Guide
OneTouch Verio Flex™ Blood Glucose
Monitoring System
Use this guide to get to know your meter, and follow the steps
inside to get started.
IMPORTANT: Please read the Owner's Booklet that came
with your system.
Intended use
The OneTouch Verio Flex™ Blood Glucose Monitoring System is
intended to be used for the quantitative measurement of glucose
(sugar) in fresh capillary whole blood samples drawn from the
fingertip.
The OneTouch Verio Flex™ Blood Glucose Monitoring System is
intended for self-testing outside the body (in vitro diagnostic
use) by people with diabetes at home as an aid to monitor
eectiveness of diabetes control.
Limitations
The OneTouch Verio Flex™ Blood Glucose Monitoring System is
intended to be used by a single patient and should not be shared.
The system is not to be used for the diagnosis of or screening
of diabetes or for neonatal use. The system is not for use on
critically ill patients, patients in shock, severely dehydrated
patients or hyperosmolar patients.
2Take a test
Insert a test strip (gold side and 2 silver
prongs facing you) to turn the meter on.
Flashing blood drop
appears.
Apply blood sample to the
channel on either side of
the test strip. Wait for the
channel to fill.
The channel turns red and
the meter counts down
from 5 to 1.
Turn it on
Press and hold until the start-
up screen appears.
1Set the time and date on your meter
Set the time on the first SET screen
> Hour flashes. Press if correct
or edit and confirm.
> Minutes flash. Press if correct
or edit and confirm.
> AM/PM flashes. Press if
correct or edit and confirm.
Set the date on the next SET screen
> Year flashes. Press if correct
or edit and confirm.
> Month flashes. Press if
correct or edit and confirm.
> Day flashes. Press if correct
or edit and confirm.
Ready to test
Your meter setup is complete when
the screen with 3 dashes appears.
Use buttons to edit each
setting and press to confirm.
AW 06933101A
© 2015 LifeScan, Inc.
Rev. Date: 03/2015
Manufactured by:
LifeScan Europe
Division of Cilag
GmbH International
Gubelstrasse 34
6300 Zug
Switzerland
AW 06933101A

3View your reading
Example of an In Range reading
Your reading appears on the display. The Range Indicator arrow
points to the blue, green, or red Range Indicator color bar, to let
you know your reading is below, within, or above your range limit.
Example of a Below
Range reading
Example of an Above
Range reading
4Optional: Connect to a mobile device
Your meter comes with Bluetooth® Smart technology. This allows
you to wirelessly send your readings to a mobile device such as a
phone or a tablet, where you can view and graph them.
To learn more about using your meter's wireless feature and
view a complete listing of compatible devices and software
applications, visit us at www.OneTouch.com.
Connecting your meter
Press and at the same time to turn the Bluetooth®
feature on and o. When prompted by your mobile device, enter
the PIN shown on your meter into your device.
The symbol means
Bluetooth® is on.
Example of a PIN number.
Meter power
Low battery
Battery empty
Control solution
Syncing
Bluetooth® feature on
History Mode (past readings)
Apply sample
Range Indicator arrow
Setting mode
Meter symbols
About the Range Indicator
Your meter comes with a Range Indicator that automatically lets
you know if your reading is below, above or within your range
limits. The high and low range limits used by the Range Indicator
are pre-set as follows:
Pre-set low range limit Pre-set high range limit
For details about changing the pre-set range limits to suit your
needs, refer to your Owner's Booklet.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc., and any use of such marks by LifeScan Scotland Ltd. is under
license. Other trademarks and trade names are those of their respective owners.
IMPORTANT SAFETY INSTRUCTIONS:
• This meter and lancing device are for single patient use
only. Do Not share them with anyone else, including family
members! Do Not use on multiple patients!
• After use and exposure to blood, all parts of this kit are
considered biohazardous. A used kit may potentially transmit
infectious diseases even after you have performed cleaning
and disinfection.
For more information see: FDA Public Health Notification: "Use
of Fingerstick Devices on More than One Person Poses Risk for
Transmitting Bloodborne Pathogens: Initial Communication"
(2010) http://www.fda.gov/MedicalDevices/Safety/
AlertsandNotices/ucm224025.htm.
CDC Clinical Reminder: "Use of Fingerstick Devices on More than
One Person Poses Risk for Transmitting Bloodborne Pathogens"
(2010) http://www.cdc.gov/injectionsafety/Fingerstick-
DevicesBGM.html.
As your partner in diabetes care, we welcome you to contact us
(7 days a week, 8 a.m. - 10 p.m. Eastern Time) at 1 888 567-3003
(English), 1 888 567-3010 (Español), or www.OneTouch.com.
Meter Made in China
Consult instructions for use.