ONFORU CTB24UV User manual

MODEL:
CTB24UV CTB48UV
CTB72UV CTB96UV
LED LIGHT
Product Manual

2
COMPONENTS AND STRUCTURE
1. Tempered Glass Lid
2. LED Light Source
3. Lamp Bracket
2
1
33x18AWG
(US) 1.5m(4.92ft)
CTB24UV CTB48UV
CTB72UV CTB96UV

3
PARTS LIST
AScrew
QTY: 2 BMachine Screw
QTY: 4 CExpansion Rubber Plug
QTY: 4
DLamp Brackets
QTY: 2 EHex Screw Key QTY: 1

4
Model
Weight
Max Projected
Area
The intended purpose of this special
purpose product:This light is used to
create atmosphere. it is not suitable
for household room illumination，the
light source is not intended for use in
other applications.
Note:
Dimensions
（LxHxW）
DIMENSIONS
0.53KG/1.17lb
0.0255m²/0.2744ft²
430*66*76mm/
10.93*2.58*2.99in
0.9KG/1.98lb
0.0309m²/0.333ft²
430*80*76mm/
10.93*3.15*2.99in
1.21kg/2.67lb
0.0425m²/0.457ft²
430*110*110mm/
10.93*4.33*4.33in
1.6kg/3.53lb
0.0542m²/0.583ft²
430*140*110mm/
10.93*5.5*4.33in
Beam Angle
t
a
Luminaire Location
120°
-20-40°C/-4°F-104°F
SUITABLE FOR WET LOCATIONS
SPECIFICATIONS
Model
Input Voltage
Wavelength
Chromaticity coordinate
CRI
CTB24UV CTB48UV CTB72UV CTB96UV
CTB24UV CTB48UV CTB72UV CTB96UV
Input Current
Rated Power
0.42A
48W
0.6A
72W
0.2A
24W
0.82A
96W
100-120V～60Hz
385-400nm
x=0.1763 y=0.0317
Power Factor ≥0.9
-1.9
LED FLOODLIGHT
H
L W

PREPARATION
5
Check all components for damage, do not use the product if
it is damaged.
Estimated Assembly Time:10-30 minutes
TOOLS REQUIRED（not included）
WARNING:
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH
THE APPLICABLE INSTALLATION CODE BY A PERSON
FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF
THE PRODUCT AND THE HAZARDS INVOLVED.
RISK OF SHOCK- BEFORE BEGINNING INSTALLATION,TURN
OFF ELECTRICITY AT THE CIRCUIT BREAKER BOX OR THE
MAIN FUSE BOX.
Flathead
screwdriver
Screwdriver Electric drill Eye Protection Pliers Step Ladder

WARNING: INSTALLING THIS LIGHT IN AN UNGROUNDED
ELECTRICAL SYSTEM MAY CAUSE THE METAL PARTS OF
THE LIGHT TO CARRY CURRENT IF ANY WIRES OR WIRE
CONNECTIONS ARE DAMAGED OR LOOSE. IN THIS CASE,
ANYONE WHO TOUCHES THE LIGHT WILL RECEIVE AN
ELECTRIC SHOCK, RESULTING IN INJURY OR DEATH.
BE CAREFUL NOT TO DAMAGE OR CUT THE WIRE
INSULATION (COVERING) DURING INSTALLATION. DO NOT
LET THE WIRES TOUCH ANY SHARP EDGES.
6
CAUTION:
PLEASE MAKE SURE YOUR WALL SWITCH AND POWER AT
MAIN CIRCUIT BREAKER BOTH ARE OFF.
IF IN DOUBT ABOUT ELECTRICAL INSTALLATION, CONSULT
A LICENSED ELECTRICIAN.

7
INSTALLATION STEPS
Product appearance may vary from image shown.
STEP 1:
Fix the bracket on the lamp with the combination screw.
(as shown in the image)
STEP 2:
According to the spacing (see the “A” part of the picture)
of four holes on the lamp brackets, drill four mounting
holes. (as shown in the image)
STEP 3:
Put the brackets onto the prepared mounting holes and
then screw them on.
STEP 4:
Adjust the beam direction as you like, and then plug into
the main socket.
NOTE:
Recommended installation height not higher than 5 m (16.4 ft).
Step 1
A
Step 2
Step 3
Step 4
A
D
B
C

Manufacturer / Hersteller:
ShenZhenShiMengZhiTuoKeJiYouXianGongSi
Address: qianwanyilu1haoAdong201shiqianhaishenganghezuoquShenZhen,Guang
Dong, 518000,CN
[email protected] www.onforuleds.com
69 Aberdeen Avenue, Cambridge CB2 8DL,
United Kingdom | [email protected]
EU REP MDH LIGHTING LTD
Suite 302, 292 Strovolos Avenue, 2048 Strovolos
Nicosia, Cyprus | [email protected]
Made in China
UK REP MDH LIGHTING LTD