Oregon Scientific WL388 User manual

illumi Shine
Wake Up Clock
Model: WL388
User Manual
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock
to persons.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING: SHOCK HAZARD –DO NO OPEN
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
Caution marking is located at the bottom of apparatus.

TABLE OF CONTENTS
Introduction…………………………………………………………………….. 1
Overview
Front View…………………………………………………………………. 1
Rear View.…………………………………………………………………. 1
Getting Started
For First Time Use……………………………………………………….2
Connect to Power Source……………………………………………… 2
Location Selection………………………………………………………. 2
Clock
Manually Set Clock……………………………………………………… 2
Alarm…………………………………………………………………………….. 3
Soothing Nature Sound Player……………………………………………… 4
Sleep Timer……………………………………………………………………… 4
Sunrise Control…………………………………………..……………………..5
Reset…………………………………………………………………………….. 5
Connect with your Mobile Device
Register a Main Unit……………………………………………………. 5
Getting Started………………………………………………………….. 6
Sleep Tracker……………………………………………………………. 6
Deregister from the Application………………………………………6
Troubleshooting………………………………………………………………. 7
Precaution……………………………………………………………………….7
Care and Maintenance………………………………………………………… 9
Smart Phone Compatibility………………………………………………….. 9
Specifications………………………………………………………………….. 9
About Oregon Scientific……………………………………………………… 9
EU-Declaration of Conformity………………………………………………. 10
FCC Statement…………………………………………………………………. 10
Declaration of Conformity………………………..…………………… 11

INTRODUCTION
Thank you for selecting our Oregon ScientificTM illumi Shine Wake Up Clock (model: WL388), which
logically combines an alarm function with a biological wake-up system, and can be remotely
controlled by your mobile device through Bluetooth 4.0 (BLE) via downloaded application.
This product is currently only compatible with the following mobile devices: iPhone 4S, iPhone 5, iPad
(3rd Generation), iPad (4th Generation), iPad Mini, iPod touch (5th Generation), which use this logo
to indicate reliable transmission linkage.
The principle of this product is based on the human body’s reaction to light. Our body clock is often
not in sync with the demands and rhythm of modern life, and is affected by external cues such as
sunlight. Light at dawn stimulates production of cortisol, which gets the body ready to work and wake
up. By simulating dawn, Oregon Scientific’s illumi Shine Wake Up Clock (WL388) prepares the body
to wake up by gradually increasing brightness to the set level in the 20 minutes prior to desired (set)
alarm time.
Wake energized for a better start on the day. Wake up as nature intended!
OVERVIEW
FRONT VIEW
REAR VIEW
1. : Alarm is On
2. :Soothing sound is playing
3. : Connected with mobile device through
Bluetooth
4. : Sleep timer is on
5. : Sunrise intensity control mode
6. Clock display
7. / : Morning/afternoon
8. Sunrise/sunset simulation
1. Auto dimmer sensor
2. : Toggle to set sleep timer; display the rest of sleep time
3. : Sun simulation on/off
4. : Turn on/off soothing sound; toggle to select soothing
sounds
5. : Decrease value of settings
6. RESET / SET CLOCK: Reset to default settings
7. : Enter alarm settings; view alarm status; confirm alarm
settings; alarm on/off; edit alarm setting
8. : Increase value of settings
9. Speaker
10.Power adapter socket
11.Stand slot

GETTING STARTED
FOR FIRST TIME USE
Inside the package is a plastic insert, for vertically
supporting the wake-up light on a table-top.
Insert the plastic stand into the slot at the rear of the light
with some pressure until you hear a click.
CONNECT TO POWER SOURCE
Put the plug into the wall socket and connect the jack to the unit.
1.Use only the power adapter supplied with this product. To order a replacement power adapter,
please contact our customer service.
2.The power adapter is intended to be correctly oriented in a vertical or floor mount position. The
prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or
cabinet outlet.
LOCATION SELECTION
Before selecting a location to place the unit, consider the following:
Ensure there is approximately 15 cm between unit and nearest object, such as walls or other
objects.
Ensure there is at least 40 cm of space above the top of the unit for ventilation purposes.
Ensure the distance between the unit and the wall socket is not longer than the power cord itself.
The main unit should not be exposed to wet conditions. No objects filled with liquid, such as
vases, should be placed on the main unit.
CLOCK
You can set the clock using the main unit as well as your mobile
device. However, the clock will be updated once the main unit is
connected with your mobile device through Bluetooth.
MANUALLY SET CLOCK
1.After plugging in the power adapter or pressing RESET on the main
unit, the main unit will display the connection ID and then
automatically enters clock setting mode.
2.The setting sequence is 12/24-hr format, then hour, then minute.
3.Press / to change the settings, or press and hold / to
rapidly change the settings.
4.Press any button ( / / / ) to confirm settings.

In step 1above, after pressing RESET, there is a screen
displaying a random four-digit connection ID, which is the password for
logging into the application with your mobile device. (See: Connect
with Your Mobile Device.) You can write down the four-digit number
for future use with other mobile devices.
ALARM
You can set 1 alarm on the main unit or 5 alarms through your mobile device, with different alarm
sounds.
To set the alarm:
1.Press and hold to enter setting mode.
2.The setting sequence is hour, minute, light ON/OFF and alarm sound.
3.Press / to adjust value
4.Press again to confirm setting.
OR
Do not press any button to exit the setting.
In order to wake you gently, the sunrise and sound will start 20 minutes and 5 minutes,
relatively, before alarm time.
Please see the section Alarm with Soothing Sound for details on the alarm sound.
It is recommended that the main unit is not placed too far and not lower than your head while
in a sleeping position. Make sure the sunrise is not blocked by bed, duvet or pillow.
The brightness intensity of the sunrise follows the default setting.
To active/deactivate the alarm:
After setting the alarm, you can toggle to
active ( appears on the display screen), or
deactivate the alarm at any time.
OFF indicates the alarm function has been disabled.
To silence the alarm:
Once the alarm sounds each day, there will be 3 snooze times, at 8
minutes each. During the 8-minute snooze, the icon will flash for
indication.
Tap the top of the light to snooze until the 3rd snooze sound ends.
OR

Press any key on the back panel to end the alarm (no snooze).
You can also silence the snooze sound through your mobile device. For more details, browse
the Information page of your mobile app.
SOOTHING NATURE SOUND PLAYER
You can use the wake-up light solely as a soothing sound player without the light function. You can
also set your desired sound volume.
To select a sound:
Toggle to activate the soothing sound function and automatically
play the sound. The number of the sound and show on the display
screen.
To turn off the sound:
Toggle until OFF shows on the display screen. The sound will stop and will disappear from
the display screen.
To adjust sound volume:
While playing a soothing sound, press / to select from three volume options:
L / M / H
SLEEP TIMER
You can set the sleep timer for the sunset function and soothing sound. The
sunset and sound will fade out to help your body ease into sleep.
To adjust the sleep timer setting:
1. Press and to set your preference settings.
2. Press to display the current sleep timer.
3.Toggle to display sleep timer options: OFF/30/60/90/120 min. If no button is pressed, the sleep
timer is activated.
4.Once the timer is activated, you can press any key at the back panel to switch off the sleep timer.
You can press to see the time left.
automatically disappears from the display screen if the sleep
timer reaches the set time.
Type
Sound Name
1
Renew
2
Relax
3
Bird Song
4
Ocean Waves
5
Raindrops

SUNRISE CONTROL
You can adjust the sunrise simulation to your desired
brightness intensity (1-20 level). For your convenience,
the brightness intensity will be stored in memory for the
next use.
To adjust the brightness intensity:
1.Press , the current brightness intensity displays and displays on the screen.
2.Press / to adjust brightness level. 1is the minimum brightness level and 20 is the maximum
brightness level.
RESET
Press RESET to return to the default settings.
CONNECT WITH YOUR MOBILE DEVICE
You can remotely set and control the wake-up clock through Bluetooth 4.0 using
your mobile device with the downloaded application from the Apple Store. To
quickly find the application, type ‘illumiShine’ as the keyword in the search engine.
After registering the application, your mobile device can also be used as a sleep
tracker for monitoring your sleep status.
REGISTER A MAIN UNIT
A random four-digit connection ID is displayed on the screen
each time you reset the main unit. This number is a password
for registering the application and successfully connecting to the
light. For more details, see Manually Set Clock in your user
manual.
If the registration is unsuccessful, you cannot access the
application apart from the sleep tracker function. Please try to
reset the main unit to get a new four-digit password.
GETTING STARTED
After successfully registering the application, a helpful product
tour will appear.

You can tap at any time for the Information page to review
the Product Tour.
SLEEP TRACKER
With the sleep tracking feature and vibration detection by your mobile device, the
application can monitor your sleep status for analysis and improvement of your
sleep quality.
Your mobile device will need to charge the whole night. Please place the mobile
device face down beside your pillow, where it can detect your movements. For more
details, please browse the product tour of the application.
DEREGISTER FROM THE APPLICATION
You must deregister the current main unit from the application before registering another one.
To disconnect from your current application, follow the steps below:
1. Tap icon.
2. Tap Forget ID.
3. Tap RESET to erase the current ID memory in the application and the connection will be
interrupted immediately.
TROUBLESHOOTING
Problem
Possible
cause
Solutions/Remarks
The main unit does not work.
Power supply
Ensure plug has been firmly plugged into the
wall socket, not controlled by wall switch.
Ensure there is no power failure.
The main unit does not work.
Normal use
Press RESET at the rear of the main unit.
Check the connection with the mobile device.
When setting functions, the
unit does not respond.
Normal use
Connect the power adapter again or press
RESET at the rear of the main unit.
The appliance will then be reset to factory
default settings.
No sound when the alarm
goes on.
Alarm function
disabled
Ensure alarm icon is displayed on display
screen. If OFF is displayed, press ALARM to
enable.
Alarm did not activate today,
but it did yesterday
Alarm function
disabled
Ensure you select the correct alarm time
format, AM/PM.
Check the power connection for the possibility
of a power failure.

The sunrise wakes me too
late.
Location of
unit is not
suitable
Check if the main unit has been synchronized
by a mobile device which could update and
modify the alarm setting on your main unit.
It is recommended that the main unit is not
placed too far and not lower than your head
while in a sleeping position. Make sure the
sunrise is not blocked by bed, duvet or pillow.
Snooze does not work.
Proper
pressure
Press the top of the main unit where the
snooze is deactivated.
I cannot register main unit.
BLE issue
Check Bluetooth is activated on your mobile
device.
I cannot register a new main
unit.
Application
Download the correct application.
Password
Press RESET to get a new password, and
then input this four-digit number in the
application.
Deregistration
You need to deregister the previous main unit
from the application before registering a new
one. Get into Information in the application,
and tap Forget ID to deregister.
Sleep tracker cannot work
Location of
mobile device
It is recommended that your mobile device
should be placed near your upper body, such
as beside the pillow.
Uninterrupted
charging
Your mobile device needs to charge through
the power cable for the whole night.
PRECAUTIONS
DANGER
•Always follow instructions in Care and Maintenance when cleaning the unit.
•Do not immerse the unit in any liquid to avoid electric shock and / or fire hazard.
•Do not pull the electric cord to move the unit or to unplug.
•Do not part the unit when it is plugged to power supply or operating.
•Do not clean the power jack with water or any other liquid or a (flammable) solvent to avoid
electric shock and / or fire hazard.
•Do not plug or unplug the power cord with wet hands.
WARNING
•The unit cannot be operated for any use other than its intended purpose or beyond the technical
data specified. Improper use can be a danger to health or life.
•This unit is not intended for use by children or persons with diminished physical, sensory or
mental capabilities, unless they have received supervision or instruction concerning use of the
unit by a person responsible for their safety.
•Use only the adapter provided with the unit. Do not use the adapter for any other appliance.
•Do not operate the unit if you find any damage on the unit or the adapter. Switch off and unplug
the unit immediately if it is malfunctioning.
•This product is for indoor use only.
GENERAL
•If you share a bedroom, another person may unintentionally wake up from the light of this
product, even though this person is further away from the product. This is due to the differences
in light sensitivity between people.
•FOR DETAILS ON THE illumiShine app, PLEASE REFER TO THE USER MANUAL

MENTIONED IN THE APP.
•Images shown in this manual may differ from the actual display.
•The contents of this manual may not be reproduced without the permission of the manufacturer.
IMPORTANT
•Read this manual before first use and save it for future reference
•Consult your doctor before using this product if you have suffered or are suffering from serious
depression.
•This product is not for lighting lamp purpose, please use other lighting device for illumination
purpose
•The illumiShine app is a smart phone application to monitor and record your estimated sleep
pattern. The data is used to determine the optimal time to turn on the wake-up light. This unit is
not a precise instrument.
•This product cannot help to reduce the amount of sleep needed. It does not eliminate the need
for sleep.
•THIS PRODUCT AND ITS AFFILIATED SMART PHONE PROGRAM IS NOT A MEDICAL
DEVICE.
DOs
•Place the unit on a dry, stable, level, water-resistant surface with safe surroundings.
•Unplug the unit from mains power supply when not in use. If you are not going to use the unit for
a long time, see Care and Maintenance for storage suggestions.
•Children/pets should be supervised to ensure that they DO NOT play with the unit especially the
parts.
•When disposing of this product, ensure it is collected separately for special waste treatment.
DON’Ts
•DO NOT tamper with the unit’s internal components. This invalidates the warranty.
•DO NOT subject the unit to excessive force, shock, dust, temperature or humidity.
•DO NOT cover the unit with anything such as newspaper, curtains or clothing when operating.
•DO NOT immerse the unit in water. If you spill any liquid on it, dry it immediately with a soft, lint-
free cloth.
•DO NOT clean the unit with abrasive or corrosive materials.
•DO NOT dispose of old batteries as unsorted municipal waste. Collection of such waste
separately for special treatment is necessary.
NOTE The technical specifications for this product and the contents of the user manual are subjected
to change without notice.
CARE AND MAINTENANCE
•Always unplug the unit before cleaning.
•Do not immerse the unit in water. If you spill any liquid on it, dry it immediately with a soft, lint-
free cloth.
•Clean the unit regularly with a dry soft cloth to prevent accumulating dust.
SMART PHONE COMPATIBILITY
This product is also works with illumiShine app that can be installed on the following mobile phone
operation system.

Compatible with
- iPhone® 4S, iPhone® 5
- iPad® (3rd and 4th generation), iPad® 2, iPad® mini
- iPod touch® (5th generation)
- iOS 5.0 or above
SPECIFICATIONS
Type
Description
Dimension
(L x W x H)
20 x 9.5 x 20cm
(7.9 x 3.7 x 7.9 inches)
Weight
490g
Operation temperature
Temperature range (operation)
10 °C to 40 °C
Temperature range (storage)
-20 °C to 60°C
Power
Input
100-240V 50-60HZ 300 mA
Output
7.5 V 1000mA
ABOUT OREGON SCIENTIFIC
Visit our website www.oregonscientific.com to learn more about Oregon Scientific products.
For any enquiry, please contact our Customer Services at [e-mail].
Oregon Scientific Global Distribution Limited reserves the right to interpret and construe any contents,
terms and provisions in this user manual and to amend it, at its sole discretion, at any time without
prior notice. To the extent that there is any inconsistency between the English version and any other
language versions, the English version shall prevail.
EU-DECLARATION OF CONFORMITY
Hereby, Oregon Scientific, declares that illumi Shine Wake Up Clock (model: WL388) is in compliance
with the essential requirements and other relevant provisions of Directive 2004/108/EC. A copy of the
signed and dated Declaration of Conformity is available on request via our Oregon Scientific
Customer Service.
This Class B digital apparatus complies with Canadian ICES-003.

FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation.
WARNING Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio / TV technician for help.
DECLARATION OF CONFORMITY
The following information is not to be used as contact for support or sales. Please call our customer
service number (listed on our website at www.oregonscientific.com), or on the warranty card for this
product) for all inquiries instead.
We
Name: Oregon Scientific, Inc.
Address: 19861 SW 95th Ave.,Tualatin,
Oregon 97062 USA
Telephone No.: 1-800-853-8883
declare that the product
Product No. & Name: WL388
illumi Shine Wake Up Clock
Manufacturer: IDT Technology Limited
Address: Block C, 9/F, Kaiser Estate,
Phase 1,41 Man Yue St.,
Hung Hom, Kowloon,
Hong Kong.