Oregon Scientific 16012 User manual

Watch n’ Learn User Manual
Dear Parents & Guardians, thank-you for buying Oregon
Scientific’s Watch N’ Learn. Using the latest technology
Oregon Scientific aims to develop unparalleled electronic
learning products that make learning more fun than ever
before!
Designed by experts, our products are focused on unique
interactive qualities that make an invaluable contribution to
childhood development.
With Watch N’ Learn a child can hear and see the time on
demand, together with an animation of an activity associated
with that!
When it comes to developing a child’s mind Oregon Scientific
products will help them to achieve their potential.
Instructions
Initial Activation
When purchased the Watch N’ Learn is in TRY ME mode
for demonstration purposes. Using the tip of a pencil, press
the RE-SET button located on the lower left side of the
watch. If the display or sound is weak and unclear, please
replace the batterys indicated (see “Fitting a new battery”).
The Watch N’Learn is now ready for use. Specific operations
and functions are listed below.
Setting the time
To set the time, press both LEFT and RIGHT buttons
simultaneously. Pressing them once selects the hour. Pressing
them again selects the minutes. When the
correct numbers are flashing use the LEFT
(-) and RIGHT (+) buttons to select the
correct time. When the time is set, press the
ON-DEMAND button to check your setting.
Once the time is set and there is no further user input, the
watch will revert to STAND-BY mode.
What time is it?
Press the ON-DEMAND button to hear the time. The Watch
N’ Learn also displays an animation of an activity according
to the time of day, e.g. eating, sleeping, etc.
The Alphabet
Press either the LEFT or RIGHT button (arrow
key) once to activate the alphabet teacher. A
letter is introduced, a word and supporting
animation follows. Use the LEFT and RIGHT
arrow keys to scroll through the alphabet.
The watch will show the animation of the
letter that you stop at. If there is no user input
within five seconds after the last
animation, the watch automatically
returns to the STAND-BY mode.
(Arrow)
Right Button
(Arrow)
Left Button
Reset On
Demand

Watch n’ Learn User Manual
Dear Parents & Guardians, thank-you for buying Oregon
Scientific’s Watch N’ Learn. Using the latest technology
Oregon Scientific aims to develop unparalleled electronic
learning products that make learning more fun than ever
before!
Designed by experts, our products are focused on unique
interactive qualities that make an invaluable contribution to
childhood development.
With Watch N’ Learn a child can hear and see the time on
demand, together with an animation of an activity associated
with that!
When it comes to developing a child’s mind Oregon Scientific
products will help them to achieve their potential.
Instructions
Initial Activation
When purchased the Watch N’ Learn is in TRY ME mode
for demonstration purposes. Using the tip of a pencil, press
the RE-SET button located on the lower left side of the
watch. If the display or sound is weak and unclear, please
replace the batterys indicated (see “Fitting a new battery”).
The Watch N’Learn is now ready for use. Specific operations
and functions are listed below.
Setting the time
To set the time, press both LEFT and RIGHT buttons
simultaneously. Pressing them once selects the hour. Pressing
them again selects the minutes. When the
correct numbers are flashing use the LEFT
(-) and RIGHT (+) buttons to select the
correct time. When the time is set, press the
ON-DEMAND button to check your setting.
Once the time is set and there is no further user input, the
watch will revert to STAND-BY mode.
What time is it?
Press the ON-DEMAND button to hear the time. The Watch
N’ Learn also displays an animation of an activity according
to the time of day, e.g. eating, sleeping, etc.
The Alphabet
Press either the LEFT or RIGHT button (arrow
key) once to activate the alphabet teacher. A
letter is introduced, a word and supporting
animation follows. Use the LEFT and RIGHT
arrow keys to scroll through the alphabet.
The watch will show the animation of the
letter that you stop at. If there is no user input
within five seconds after the last
animation, the watch automatically
returns to the STAND-BY mode.
(Arrow)
Right Button
(Arrow)
Left Button
Reset On
Demand

Watch n’ Learn User Manual
Dear Parents & Guardians, thank-you for buying Oregon
Scientific’s Watch N’ Learn. Using the latest technology
Oregon Scientific aims to develop unparalleled electronic
learning products that make learning more fun than ever
before!
Designed by experts, our products are focused on unique
interactive qualities that make an invaluable contribution to
childhood development.
With Watch N’ Learn a child can hear and see the time on
demand, together with an animation of an activity associated
with that!
When it comes to developing a child’s mind Oregon Scientific
products will help them to achieve their potential.
Instructions
Initial Activation
When purchased the Watch N’ Learn is in TRY ME mode
for demonstration purposes. Using the tip of a pencil, press
the RE-SET button located on the lower left side of the
watch. If the display or sound is weak and unclear, please
replace the batterys indicated (see “Fitting a new battery”).
The Watch N’Learn is now ready for use. Specific operations
and functions are listed below.
Setting the time
To set the time, press both LEFT and RIGHT buttons
simultaneously. Pressing them once selects the hour. Pressing
them again selects the minutes. When the
correct numbers are flashing use the LEFT
(-) and RIGHT (+) buttons to select the
correct time. When the time is set, press the
ON-DEMAND button to check your setting.
Once the time is set and there is no further user input, the
watch will revert to STAND-BY mode.
What time is it?
Press the ON-DEMAND button to hear the time. The Watch
N’ Learn also displays an animation of an activity according
to the time of day, e.g. eating, sleeping, etc.
The Alphabet
Press either the LEFT or RIGHT button (arrow
key) once to activate the alphabet teacher. A
letter is introduced, a word and supporting
animation follows. Use the LEFT and RIGHT
arrow keys to scroll through the alphabet.
The watch will show the animation of the
letter that you stop at. If there is no user input
within five seconds after the last
animation, the watch automatically
returns to the STAND-BY mode.
(Arrow)
Right Button
(Arrow)
Left Button
Reset On
Demand

Fitting a new battery
Caution!
Small + Loose parts included adult
assistance is necessary.
Use a small philips screwdriver to
remove the back of the watch. Replace
the battery with a new CR2032. Extra
care should be taken with the removal
of the backing. Beside the battery there
are two small springs that function as
speaker contacts. Take care as they are
small and loose. When replacing the
watch backing the springs need to be
standing upright. The backing fits
correctly in only one position.
Battery Notice
• Keep away from fire at all times.
•Remove batteries from the Watch N’Learn when it will not
be used for an extended period of time.
•The battery needs replacing, if the display becomes weak
or sound distorted.
•Non-rechargeable batteries are not to be recharged.
•Rechargeable batteries are to be removed from the toy before
being charged (if removable).
•Rechargeable batteries are only to be charged under adult
supervision (it removable).
•The supply terminals are not to be short-circuited.
Caution:
• Keep your Watch N’ Learn free from water, liquid toiletries
(cologne, perfume, hair liquids, etc), and moisture.
•Keep your Watch N’ Learn free from dirt, sand and other
small particles.
•Keep the unit clean by wiping it with a slightly damp cloth.
•Avoid long-term exposure to direct sunlight.
• Avoid extreme temperatures.
• Do not drop the unit on hard surfaces.
Consumer Services
Developing learning products is a responsibility that we at
Oregon Scientific take very seriously. We make every effort
to ensure the accuracy and appropriateness of the information
which forms the value of our products is of the highest quality.
However, errors can occur. It is important for you to know
that we stand behind our products and we encourage you to
call our Consumer Services Department at 1-800-853-8883
with any problems and/or suggestions that you might have.
Our service representatives will be happy to help you.
Notes:
Conforms to safety requirements of ASTM F963, EN71 Parts
1,2 & 3 and EN 50088.
In an effort to continually improve our products, the final
product may occasionally differ slightly from the diagrams
shown.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorientate or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio TV technician
for help.
This Class B digital apparatus complies with Canadian ICES-
003.
Cet appareil mumérique de la class B est conforme à la norme
NMB-003 du Canada.
086-000317-011

Fitting a new battery
Caution!
Small + Loose parts included adult
assistance is necessary.
Use a small philips screwdriver to
remove the back of the watch. Replace
the battery with a new CR2032. Extra
care should be taken with the removal
of the backing. Beside the battery there
are two small springs that function as
speaker contacts. Take care as they are
small and loose. When replacing the
watch backing the springs need to be
standing upright. The backing fits
correctly in only one position.
Battery Notice
• Keep away from fire at all times.
•Remove batteries from the Watch N’Learn when it will not
be used for an extended period of time.
•The battery needs replacing, if the display becomes weak
or sound distorted.
•Non-rechargeable batteries are not to be recharged.
•Rechargeable batteries are to be removed from the toy before
being charged (if removable).
•Rechargeable batteries are only to be charged under adult
supervision (it removable).
•The supply terminals are not to be short-circuited.
Caution:
• Keep your Watch N’ Learn free from water, liquid toiletries
(cologne, perfume, hair liquids, etc), and moisture.
•Keep your Watch N’ Learn free from dirt, sand and other
small particles.
•Keep the unit clean by wiping it with a slightly damp cloth.
•Avoid long-term exposure to direct sunlight.
• Avoid extreme temperatures.
• Do not drop the unit on hard surfaces.
Consumer Services
Developing learning products is a responsibility that we at
Oregon Scientific take very seriously. We make every effort
to ensure the accuracy and appropriateness of the information
which forms the value of our products is of the highest quality.
However, errors can occur. It is important for you to know
that we stand behind our products and we encourage you to
call our Consumer Services Department at 1-800-853-8883
with any problems and/or suggestions that you might have.
Our service representatives will be happy to help you.
Notes:
Conforms to safety requirements of ASTM F963, EN71 Parts
1,2 & 3 and EN 50088.
In an effort to continually improve our products, the final
product may occasionally differ slightly from the diagrams
shown.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorientate or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio TV technician
for help.
This Class B digital apparatus complies with Canadian ICES-
003.
Cet appareil mumérique de la class B est conforme à la norme
NMB-003 du Canada.
086-000317-011

Fitting a new battery
Caution!
Small + Loose parts included adult
assistance is necessary.
Use a small philips screwdriver to
remove the back of the watch. Replace
the battery with a new CR2032. Extra
care should be taken with the removal
of the backing. Beside the battery there
are two small springs that function as
speaker contacts. Take care as they are
small and loose. When replacing the
watch backing the springs need to be
standing upright. The backing fits
correctly in only one position.
Battery Notice
• Keep away from fire at all times.
•Remove batteries from the Watch N’Learn when it will not
be used for an extended period of time.
•The battery needs replacing, if the display becomes weak
or sound distorted.
•Non-rechargeable batteries are not to be recharged.
•Rechargeable batteries are to be removed from the toy before
being charged (if removable).
•Rechargeable batteries are only to be charged under adult
supervision (it removable).
•The supply terminals are not to be short-circuited.
Caution:
• Keep your Watch N’ Learn free from water, liquid toiletries
(cologne, perfume, hair liquids, etc), and moisture.
•Keep your Watch N’ Learn free from dirt, sand and other
small particles.
•Keep the unit clean by wiping it with a slightly damp cloth.
•Avoid long-term exposure to direct sunlight.
• Avoid extreme temperatures.
• Do not drop the unit on hard surfaces.
Consumer Services
Developing learning products is a responsibility that we at
Oregon Scientific take very seriously. We make every effort
to ensure the accuracy and appropriateness of the information
which forms the value of our products is of the highest quality.
However, errors can occur. It is important for you to know
that we stand behind our products and we encourage you to
call our Consumer Services Department at 1-800-853-8883
with any problems and/or suggestions that you might have.
Our service representatives will be happy to help you.
Notes:
Conforms to safety requirements of ASTM F963, EN71 Parts
1,2 & 3 and EN 50088.
In an effort to continually improve our products, the final
product may occasionally differ slightly from the diagrams
shown.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorientate or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio TV technician
for help.
This Class B digital apparatus complies with Canadian ICES-
003.
Cet appareil mumérique de la class B est conforme à la norme
NMB-003 du Canada.
086-000317-011

Fitting a new battery
Caution!
Small + Loose parts included adult
assistance is necessary.
Use a small philips screwdriver to
remove the back of the watch. Replace
the battery with a new CR2032. Extra
care should be taken with the removal
of the backing. Beside the battery there
are two small springs that function as
speaker contacts. Take care as they are
small and loose. When replacing the
watch backing the springs need to be
standing upright. The backing fits
correctly in only one position.
Battery Notice
• Keep away from fire at all times.
•Remove batteries from the Watch N’Learn when it will not
be used for an extended period of time.
•The battery needs replacing, if the display becomes weak
or sound distorted.
•Non-rechargeable batteries are not to be recharged.
•Rechargeable batteries are to be removed from the toy before
being charged (if removable).
•Rechargeable batteries are only to be charged under adult
supervision (it removable).
•The supply terminals are not to be short-circuited.
Caution:
• Keep your Watch N’ Learn free from water, liquid toiletries
(cologne, perfume, hair liquids, etc), and moisture.
•Keep your Watch N’ Learn free from dirt, sand and other
small particles.
•Keep the unit clean by wiping it with a slightly damp cloth.
•Avoid long-term exposure to direct sunlight.
• Avoid extreme temperatures.
• Do not drop the unit on hard surfaces.
Consumer Services
Developing learning products is a responsibility that we at
Oregon Scientific take very seriously. We make every effort
to ensure the accuracy and appropriateness of the information
which forms the value of our products is of the highest quality.
However, errors can occur. It is important for you to know
that we stand behind our products and we encourage you to
call our Consumer Services Department at 1-800-853-8883
with any problems and/or suggestions that you might have.
Our service representatives will be happy to help you.
Notes:
Conforms to safety requirements of ASTM F963, EN71 Parts
1,2 & 3 and EN 50088.
In an effort to continually improve our products, the final
product may occasionally differ slightly from the diagrams
shown.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorientate or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio TV technician
for help.
This Class B digital apparatus complies with Canadian ICES-
003.
Cet appareil mumérique de la class B est conforme à la norme
NMB-003 du Canada.