Oricom IET400 User manual
IET400 Infrared In
Ear Thermometer
Model No. PG-IRT1601
IET400 is included as a medical device on the Australian
Register of Therapeutic Goods (ARTG No. 338230).
IET400 is intended for use as a measuring device for
determining the patient's body temperature.
ALWAYS READ THE LABEL AND USER GUIDE,
USE ONLY AS DIRECTED.
USER MANUAL
Keep this user guide for future reference. Always retain
your proof of purchase in case of warranty service.
Ref:21102020
ORICOM CUSTOMER
SUPPORT
Oricom have a trained and dedicated team of Customer
Support Representatives, here to assist in answering
your questions quickly and efficiently with regard to the
operation of this product.
Oricom Support - Australia
For all product enquiries, troubleshooting or to discuss
the range of Oricom products, feel free to contact Oricom
or visit our website for answers to frequently asked
questions.
02 4574 8888
Monday - Friday 8am – 6pm AEST
www.oricom.com.au
Oricom Support - New Zealand
0800 674 266
Monday - Friday 10am - 8pm NZST
Email: [email protected]
2
Warnings
3
Table of Contents
Warnings ...........................................................................3
Product introduction...........................................................5
Cautions ............................................................................6
Body temperature measurement methods ........................7
Product layout....................................................................8
Display description ............................................................8
Battery installation .............................................................9
Basic instructions.............................................................10
Measurement methods....................................................11
Cleaning instructions .......................................................13
Frequently Asked Questions ...........................................14
Troubleshooting...............................................................15
Specications ..................................................................16
Warranty..........................................................................17
Warning
Temperature readings are for reference only. They do
not replace the diagnosis of a medical professional. If
you have any concern about the temperature readings,
please seek advice from a medical professional.
Please allow device to reach room temperature for
30 minutes before use. Failure to do so may result in
incorrect measurement results.
Warnings
The warning signs and illustrations indicated in the
manual below are intended to enable you to use the
product safely and correctly, and to prevent any harm
to you and others.
Caution: Refer to below reference chart.
Legends
Warning: Please follow specic instructions.
General warning.
Prohibited actions.
Do not disassemble.
Type BF Applied part
Water or moisture resistance.
Please read the manual carefully before use.
The packaging of this unit complies with the
requirements of environmental protection.
Product is recyclable.
Do not discard in general rubbish.
IP Classication: IP22
Need Help?
If you need assistance setting up or using your Oricom
product now or in the future, call Oricom Support.
Australia (02) 4574 8888
www.oricom.com.au
Mon-Fri 8am – 6pm AEST
New Zealand 0800 67 42 66
Mon-Fri 10am – 8pm NZST
Product introduction
54
Warnings
Warning
• Please discuss measured values with a medical
professional if required.
• The product is only intended to be used for
temperate measurement in humans.
• Do not use this product for purposes other than
body temperature measurement.
• Mobile phones may interfere with accurate
readings. Do not use mobile phones when using
this product.
• Do not use equipment that generates
electromagnetic elds near the product.
• Do not attempt to disassemble or repair this
product.
• Do not bend or stretch the device.
• Do not drop this product or subject it to shock.
• Not to be used to determine a medical diagnosis.
• Cannot be used for emergency or continuous
measurement in surgery.
• Product should not be used by those suffering
from diagnosed ear ailments.
• Do not leave the thermometer with infants or
children at any time.
• Follow all directions advised by a medical
professional.
If you use or store this product beyond the range of
specified temperature and humidity, it may not reach
intended performance specications.
Operating temperature: from +10°C ~ +40°C
Humidity: from 15%RH ~ 93%RH
Storage temperature: from +10°C ~ +40°C
Humidity: from 0%RH ~ 93%RH
Product introduction
Intended use: Infrared Ear Thermometer is intended
to measure human body temperature by measuring ear
canal temperature.
Scope of application: This product is suitable for
displaying the body temperature by measuring the heat
radiation in the ear canal.
Infrared Ear Thermometer Features:
1. Multiple colours and backlight display: White, Green,
Orange and Red.
2. Stores up to 9 readings.
3. Temperature measurement in Fahrenheit F and
Celsius C. (original setting is degree Celsius C)
4. Measuring time within 2 seconds.
5. Sound on / off function.
6. Auto power off after 30 seconds in idle mode.
Warning:
Temperature readings are for reference only. They do
not replace the diagnosis of a medical professional. If
you have any concern about the temperature readings,
please seek advice from a medical professional.
Body temperature measurement methods
6 7
Use caution items
Cautions
Warning
1. Allow device to reach room temperature for 30 minutes
before use.
♦Failure to do so may result in incorrect measurement
results.
2. Do not touch with your hands or exhale directly on the
infrared sensor.
♦If the infrared sensor is damaged or dirty, it may
cause abnormal measurement results.
3. Keep this product out of the reach of children.
4. When measuring body temperature, keep away from
direct exposure to air conditioning as this may affect
the measurement accuracy.
5. Before and after each use, use a cotton swab gently
dipped in 75% alcohol, to wipe the probe surface.
♦Do not use toilet paper or facial tissue, as it will scratch
the infrared sensor, resulting in incorrect readings.
6. Do not use if damaged.
♦Any type of damage may affect reading accuracy.
7. Product may not function correctly if wet.
Caution:
1. Product should not be used by those suffering from
diagnosed ear ailments as it may cause further irritation.
2. Do not use this product if ears are wet.
♦Temperature readings may be low.
3. Replace battery when indicated.
♦Low battery will affect temperature reading accuracy.
4. Ensure correct mode is selected.
♦Wrong mode will result in inaccurate readings.
Suggestions
1. Do not subject this device to mechanical shock.
2. Please do not disassemble, repair or modify thermometer.
3. Do not immerse in liquid. Do not allow liquid into this
product.
4. Store in a clean dry place.
5. Please contact Oricom Support for troubleshooting.
6. Please do not use around RF transmitting devices.
7. Please dispose of this device according to local
requirements.
Body temperature
measurement methods
The comparison of different
measurement methods
Measured readings differ depending on the measurement
method used. See the below table for typical readings
based on different measurement methods.
Measurement methods Normal body temperature
Anal temperature 36.6°C~38°C
Oral temperature 35.5°C~37.5°C
Axillary temperature 34.7°C~37.3°C
Cochlear temperature 35.8°C~38°C
Oral temperature 35.5°C~37.5°C
(IET400 measured value)
Battery installation
8 9
Product layout
Product layout
Ear probe cover
Display screen
Measurement button
MEM button
Power button
Battery cove
r
Probe
mem
Display description
Object
measuremen
t
Indication to
be measured
Sound
symbol
Memory
storage
Temperature
unit (◦F or ◦C)
Ear temperature
measurement
Battery status
Measurement
result display
Battery installation
1. Press battery cover and the battery cover will release
automatically.
2. Insert two 1.5V (AAA) batteries as indicated below.
Observe the correct polarity of batteries.
Press here to
remove battery cover
Low battery warning:
When battery voltage is low, LCD shows
“ ” and battery indicator is permanently
on, you will need to replace batteries.
Note:
Remove batteries if device will not be used for a
prolonged period of time.
• It is recommended to use alkaline batteries.
• Please dispose of batteries as per local
requirements.
Measurement methods
10 11
Basic instructions
Basic instructions
Sound function: turn on/off
1. In the power-on state, press “mem” key to set the
sound on or off.
2. Press “mem” button - LCD screen will show “ ” and
sound is now turned on.
3. Press “mem” button a second time - “ ” will change
to “ ” and sound is now turned off.
Switch between F or C
In off status, press and hold “mem” button for six seconds.
The screen will power on. Briey press the “mem” button
to switch between Fahrenheit (F) and Celsius (C)
temperature display modes.
Memory storage function
In off status, press “mem” button to view the stored
measurements (up to 9 readings).
Back light status
When measured temperature is < 34°C, display will show
LO with red backlight.
When measured temperature value is 34°C~37.1°C,
display will show green backlight.
When measured temperature value is 37.2°C~38.1°C,
display will show orange backlight.
When measured temperature value is 38.2°C~43.0°C,
display will show red backlight.
When measured temperature value is > 43.0°C, display
will show red backlight and “HI”.
Note:
This backlight feature is for reference only.
Measurement methods
Gently pull up the
outer ear for children
under the age of one.
Gently pull up and back
on the outer ear in the
direction of the rear of
the head, for children
over the age of one.
Ear temperature Ear temperature
Ear temperature measurement
1. After removing cover, press “ ” button to turn
on the thermometer and enter the ear temperature
measurement mode. LCD will now display
previous measurement. Place in ear as described
above, and press “ ” button to take temperature
measurement.
2. Within 2 seconds, the temperature reading will be
displayed.
MEM
LCD is ashing when
reading is in progress.
Result of measurement
Note: When temperature reading is complete, a beep will
sound and the temperature reading will be displayed. (If in
silent mode, no sound will be heard.)
Cleaning instructions
12 13
Measurement methods
Object measurement
Note:
1. Press and hold “ ” button for 6 seconds, to enter
the object measurement mode and then aim the
thermometer at the object.The temperature of the
target object can be measured directly by pressing
“ ” button.
2. Within 2 seconds, you will see the result of the
measurement on the LCD screen.
LCD is ashing when
reading is in progress.
Result of measurement
Cleaning instructions
In order to ensure precise measurements, its recommended
that the device is cleaned after each use.
Using a cotton swab containing a 75% alcohol, wipe the
thermometer probe and remove any residue that may
affect operation. Cleaning action should be maintained for
at least 5 seconds. Wipe the remainder of the thermometer
with a soft and dry cloth for a minimum of 10 seconds.
After cleaning, please ensure that there is no visible dirt
or residue on your thermometer. Wait 10 minutes before
using after cleaning.
Why should you clean after each use?
Infrared temperature reading technology adopts a
highly sensitive technique to detect temperature. Any
dust or ear wax will affect measurement accuracy and
can also increase the risk of bacterial infection.
Troubleshooting
14 15
Frequently Asked Questions
Frequently Asked Questions
Screen
display
Reasons Solutions
HI
When the target object
temperature is higher than
measurement range. If ear
temperature is more than
43.0°C, the LCD screen will
show "HI" indication.
1. (When the measurement
probe is not properly
placed in the ear canal
or if the measurement
distance is too far during
the measurement process,
the measurement result
may be low.)
2. When measurement
probe is dirty, the
measurement value may
be low; (See cleaning
instructions above).
Lo
When the target object
temperature is lower than
measurement range. If ear
temperature is less than
34°C, the LCD screen will
show "Lo" indication.
Er.H
This product has an upper
limit operating temperature
of 40°C. When the ambient
temperature exceeds this
temperature point, the LCD
screen will display an error
message “Er.H".
When you operate this
product, the environment
temperature cannot be
greater than 40°C.
Er.L
This product has a lower
limit operating temperature
of 10°C. When the ambient
temperature exceeds this
temperature point, the LCD
screen will display an error
message “Er.L”.
When you operate this
product, the environment
temperature can not be
lower than 10°C.
Err
When the environment
temperature changes
rapidly about 5 degrees,
it will show “ Err ” during
measurement in object
temperature mode, then
shutdown automatically.
When it shows “Err”,
please place this product
and keep steady in current
environment for 30 minutes
before next measurement.
When the operation is wrong, if the sound is turned on, then the
sound will read the value and remind at this moment. (A short
beep will be heard.)
Troubleshooting
Issue Reasons Solutions
When the power
is turned on, the
screen can not be
displayed.
The battery is at. Replace the new
battery.
The battery
polarity may be
incorrect.
Check battery
polarity, as per
markings on the
case.
The measurement
temperature is
low.
The measurement
position is not
correct.
Measure the
temperature correctly
according to the
instructions.
Possible dust on
sensor or ear wax
in ear.
Clean thermometer
and ear canal.
Big temperature
uctuations
with continuous
measurement.
Measurement
interval is too
short.
Wait at least 10
seconds between
measurements.
Warranty
16 17
Specications
Specications
Product name: Infrared In Ear Thermometer
Model number: IET400
Supplier model no. PG-IRT1601
Product appearance dimensions: 32 × 158 × 55mm
Product weight: Approx. 65g (not including batteries)
Measuring range: 34.0°C-43.0°C.(93.2°F-109.4°F)
Object temperature: 0°C-93.2°C (32°F-199.7°F)
Resolution ratio: 0.1°C/°F
Measurement Location: Laboratory
Accuracy: (35.0°C~42.0°C)±0.2°C,
(95.0°F~107.9°F)±0.4°F,
other temperature ±0.3°C.
Operation temperature: 10.0°C~40.0°C
(50.0°F~104.0°F), relative maximum humidity
15%RH~93%RH
Atmospheric pressure: 70kPa~106kPa
Transportation/storage temperature: -25°C~55°C
(-13°F~131°F), relative maximum humidity 0%RH~93%RH
Atmospheric pressure: 50kPa~106kPa
Display screen: LCD display screen, 4 bit numbers and
icons.
Sound: On power up, a short beep is heard when
thermometer is ready to measure temperature. A long
beep is heard when measurement is complete. System
error or fault: three short beeps. Fever alert: 10 short
beeps.
Memory: thermometer can store up to nine temperature
readings.
Automatically shut down: If no operation for 30 seconds,
thermometer will shutdown automatically.
Batteries: 2 x 1.5V AAA batteries
(alkaline batteries are recommended).
Packing parts list
1. Infrared ear thermometer
2. User guide
Manufactuered by Shenzhen Pango Electronic Co Ltd
(China) [57886].
No 25, 1st Industry Zone Fenghuang Rd, Xikeng Village,
Henggang Town, Shenzhen Guangdong 518115 China S
[237294]
How to make a claim under
your Express Warranty in
Australia
Oricom has a simple warranty process for you to follow:
• Please call or email our Customer Support Team,
• A Customer Support Team member will verify after
troubleshooting with you if your product qualifies
under warranty. If so, they will give you a Product
Return Authorisation number.
• We will then email a Return Authorisation form and a
Repair Notice (if necessary), together with instructions
on how to return the product for warranty service.
Please note that if a Customer Support Team member
advises that your product does not qualify for return, this
warranty does not apply to your product. Products that
are authorised to be returned to Oricom in Australia must
include all of the following:
• A completed Return Authorisation form
• A copy of your Proof of Purchase (please keep your
original copy)
• The faulty product, including all accessories.
Send the approved returns to:
Oricom International Pty Ltd
Locked Bag 658
South Windsor NSW 2756 Australia
Warranty
18 19
Warranty
Please note that this Express Warranty excludes expenses
incurred by you in returning any faulty product to us. You
must arrange and pay any expenses incurred (including
postage, delivery, freight, transportation or insurance of
the product) to return the faulty product to us, however,
we will arrange delivery of the repaired or replaced faulty
product to you.
Important Information
Repair Notice
Please be aware that the repair of your products may
result in the loss of any user-generated data (such as
stored telephone numbers, text messages and contact
information). Please ensure that you have made a copy of
any data saved on your product before sending for repair.
Please also be aware that products presented for repair
may be replaced by refurbished products or parts of the
same type rather than being repaired.
Express Warranty (Australia)
This Express Warranty is provided by Oricom International
Pty Ltd ABN 46 086 116 369, Unit 1, 4 Sovereign Place,
South Windsor NSW 2756, herein after referred to as
“Oricom”.
Oricom warrants that the product is free from defects in
materials or workmanship during the Express Warranty
Period. This Express Warranty does not extend to any
product from which the serial number has been removed
or was purchased outside of Australia.
The benefits of this Express Warranty are in addition
to other rights and remedies you may have under
the Australian Consumer Law. Our goods come with
guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or
refund for a major failure and compensation for any other
reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does
not amount to a major failure. In the event of a minor
failure, Oricom reserves the right to choose to repair or
replace the product.
The Express Warranty Period will be a period of 12
months beginning on the date of purchase of the product
evidenced by your dated sales receipt. You are required
to provide proof of purchase as a condition of receiving
Express Warranty services.
You are entitled to a replacement product or repair of
the product at our discretion according to the terms and
conditions of this document if your product is found to be
faulty within the Express Warranty Period. This Express
Warranty extends to the original purchaser only and is not
transferable.
Warranty
20 21
Warranty
Products distributed by Oricom are manufactured using
new materials or new and used materials equivalent to
new in performance and reliability. Spare parts may be
new or equivalent to new. Spare parts are warranted to be
free from defects in material or workmanship for thirty (30)
days or for the remainder of the Express Warranty Period
of the Oricom branded product in which they are installed,
whichever is longer. During the Express Warranty Period,
Oricom will where possible repair and if not replace
the faulty product or part thereof. All component parts
removed under this Express Warranty become the
property of Oricom. In the unlikely event that your Oricom
product has a recurring failure, Oricom may always,
subject to the Competition and Consumer Act 2010, at its
discretion, elect to provide you with a replacement product
of its choosing that is at least equivalent to your product in
performance.
No change to the conditions of this Express Warranty
is valid unless it is made in writing and signed by an
authorised representative of Oricom.
Oricom will not be liable under this Express Warranty,
and to the extent permitted by law will not be liable for
any defect, loss, damage or injury arising out of or in
connection with a:
3. Failure by you to adhere to the warnings and follow
the instructions set out in this user guide for the proper
installation and use of the product;
4. Willful misconduct or deliberate misuse by you of the
product;
5. Any external cause beyond our control, including but
not limited to power failure, lightning or over voltage;
or
6. Modication to the product or services carried out on
the product by anyone other than Oricom or Oricom’s
authorised service provider.
This manual suits for next models
1
Table of contents
Other Oricom Thermometer manuals
