Orno OR-DOM-RE-914 User manual

Hand-free Audio Doorphone Kits
MODEL RL-3201B：
USER MANUAL
CONTENTS
Product Description......................1
Wiring Diagram............................4
Operation Instruction ....................5
Technical Specifications ...............6
Package Contents........................1
Safety Instruction .........................2
System Installation .......................2

12
Adapter 1×
Screws
Indoor unit 1×Rain shade 1×
A Indoor unit、
①
②
③
Fix the two screws.
Connect the indoor unit as per the wiring diagram.
Hang the indoor unit on the screws, put the adapter into AC power and it is
ready to use
50 m m
Outdoor unit 1×
Keep the indoor unit away from high temperature such as near an oven or
in direct sunlight and high humidity such as bathroom and greenhouse.
Do not touch the unit with wet hands.
Clean the camera or screen with a soft cloth and alcohol. Do not use detergent,
thinner,volatile or corrosive liqid.
Avoid throwing,dropping or hitting of the units.
Use the product under the circumstance of barrier-free and no inteference.
1. To prevent damage, the adapter should be fasten on the wall according to
instruction.
×Caution
2. Power plug as disconnecting device should be kept convenient to operate.
1. Water-proof, damage-proof, oxidation-proof and abrasion-proof zinc alloy panel
outdoor unit.
2. Hand-free intercommunication.
3. Electric-controlled lock release function.
4. Outside gate release function.
5. Outdoor monitoring.
6. Enclosed adapter for DIY.
7. The indoor unit can be hung on the wall.

B Outdoor unit、
①②
④
③
①
②
Fix the outdoor unit 1.4~1.7m high from the ground, drill three proper holes on the
wall and fix the rain shade on the wall with screws.
Do the outdoor unit wiring as per the diagram
③
④
Put the outdoor unit into the rain shade
Fix the outdoor unit with screws
34
Outdoor Gate
Outdoor Gate
DC12V
1
2
3
4
5
6
Electric-controlled
lock
Outdoor Unit
Outdoor Unit
DC12V
1
2
3
4
5
6
Wiring Diagram A
Wiring Diagram B
1.Audio wire
2.Ground wire
3.Power wire for unlocking
4.Power wire
1.Audio wire
2.Ground wire
3.Power wire for unlocking
4.Power wire
Indoor Unit
Indoor Unit
The enclosed cable is 15m.RVV4 x 0.5mm connecting wire can be chosen if you
want to lengthen it to 15-50m; RVV4x0.75mm connecting wire can be chosen if you
want to lengthen it to 50m-100m.
Connect the wiring terminals 1,2,3,4 of indoor unit with
wiring terminals 1,2,3,4 of outdoor unit; connect the terminals 5,6 of indoor unit to
electric-controlled lock with RVV2x1.0mm connecting wire.
Connect the wiring terminals 1,2,4 of indoor unit with wiring
terminals 1,2,4 of outdoor unit,connect 2,3 of indoor unit to electric-controlled lock and
5,6 to gate outdoor unit with RVV2x1.0mm connecting wire. Please refer to the wiring
diagram.
2
2
2
2
1. Unlock from outdoor unit :
2. Unlock from indoor unit:
C:Lengthening connecting wire: Electric-controlled
lock

5
LED LIGHT
MONITOR
Adapter Input Voltage
Adapter Output Voltage&Current
Power Consumption
Monitoring time
Talking time
Working Distance
Operating Temperature
Relative Humidity
AC100-240V 50Hz
DC12V
120S 10%
40S 10%
50m(4 0.5mm )×2
/60Hz
1100mA
<0.2W <2W
-10 +40
10% 90% RH
±
±
，
℃
Static state Working state
～℃
～ （ ）
SPEAKER
UNLOCK
GATE UNLOCK
TALK
VOLUME
Indoor Unit
SPEAKER
MICROPHONE CALL BUTTON
WIRING TERMINAL
Outdoor Unit
6
1. Press CALL button of outdoor unit and graceful rings will be heard from indoor unit .
You can talk with them and see them just by touching TALK button ( )of indoor
unit for about 120 seconds.
2. Touch UNLOCK button( ) to release the door.
3. Touch GATE UNLOCK button( ) to open the outside gate.
4. Touch MONITOR button( ) to monitor the outside for about 40 seconds each time.
5. The host can talk with the visitor by touching the TALK button( ) after touching
MONITOR button( ). Touch TALK button( ) again to end the talk.
6.The talking volume can be adjusted through the right knob for best performance.
MICROPHONE