Osburn AC01021 User manual

45939A
Printed in Canada 14-11-2018
INSTALLATION INSTRUCTIONS
FACEPLATES
AC01020, AC01021, AC01022
AC01020
AC01021
AC01022
WARNING :
The faceplate should never come into contact with masonry products such as cement, acid or
any other product containing abrasives. Damages and discolouration caused bythese products
will void the warranty.

2
Dimensions :
AC01020
AC01021
AC01022

3
Installation Instruction –AC01020
1. Align the clips on the faceplate with the notches on the insert. Push the front panel
onto the insert until it snaps onto it.
2. Make sure the fan cord is out on the side, in the opening between the front and
the insert.

4
Installation Instruction –AC01021
1. This faceplate can be cut according to the size of the hearth hole. To do this, two
solutions are available to you.
a) Place the faceplate temporarily where it will be installed. Draw the outline of your
chimney to guide you in cutting your facade. Cut the faceplate along the line
previously drawn.
b) Take the measurements of the hole, then cut the faceplate according to the
measures taken.

5
2. Align the clips on the faceplate with the notches on the insert. Push the front panel
onto the insert until it snaps onto it.

6
3. Make sure the fan cord is out on the side, in the opening between the front and
the insert.

7
Installation Instruction –AC01022
1. Wedge the decorative bracket between the bottom of the insert and the insert
jacket.
2. Align the clips on the faceplate with the notches on the insert. Push the front panel
onto the insert until it snaps onto it.

8
3. Make sure the fan cord is out on the side, in the opening between the front and
the insert.