oserio BTG-365 Series User manual

Operang Instrucons
Error Message List
21
‧
4
---
kcal
--- kcal
---
LV
--- %
---
lb
Today
Weight
2
i O S
Android
‧
Instrucon Manual – BTG-365 series
6
5 SEC. OFF
51 3
0.0
STEP ON
Front Rear
LCD display
Plaorm Baery Cover
Feet
Overview
Download Free APP
Baery Installaon
Reminder :
Please follow the connecng instrucons to start using it .
Install 4 ”AA” size baeries properlyOpen the baery cover
Slide the baery cover
Li the cover up
NOTE:
‧
Be sure that the polarity of the
baery is set properly.
4
Complete weighing . Connecng with APP .
5
3
1
6
Turning off automacally aer transming .
2
Place the unit on a hard, flat surface . Run o’care APP and enter “ ” bubble . Step on the scale .
The unit will shut down automacally if the weighing
data can’t be transmied in 30 seconds .
Replace baeries immediately while “LO” appears. Connecng error.
Please try again or contact our service line .
Connecng error.
Please try again or contact our service line .
Overloading or loading is unbalanced within 1 minute.
Please stand sll during measurement.
NOTE:
PA-0148-V1.0
---
kcal
--- kcal
---
LV
--- %
---
lb
Today
Weight

Important Safety Notes
1. Keep out of reach of young children.
2. Do not jump on the unit plaorm.
3. Do not step on the edge of unit plaorm.
4. Person with disabilies or physically frail should be
assisted by another person when using this unit.
5. Do not disassemble or modify the unit.
6. Using the baeries specify by the product
specificaons, polaries match the polaries of the
baery compartment as indicated.
7. Remove the baeries if the unit not be used for
three months or longer.
8. If the display not shows, check the baeries.
9. Do not mix used and new baeries or different types
of baeries to extend the life of the unit.
10. Do not use the unit on slippery surfaces such as le
floors or wet floors.
11. Place the unit in an area free from direct sunlight,
heang equipment, high humidity or extreme
temperature change.
12. Avoid excessive impact or vibraon to the unit.
13. Never submerge in water. Use alcohol to clean the
electrodes and glass cleaner (applied to a cloth
first) to keep them shiny.
14. Place the unit on a hard, flat surface where there is minimal vibraon
to ensure safe and accurate measurement.
15. Always remove your shoes before stepping on the measuring plaorm.
16. Properly dispose of baeries according to applicable local regulaons.
17. This unit is intended for home use only. It is not intended for
professional use in hospitals or other medical facilies.
Care and Maintenance
Product Specificaon
1. Store the unit in a safe and dry locaon.
2. Avoid place on the aisle, to avoid accidentally
tripped over pedestrians.
3. Never submerge in water.
4. Do not expose the unit to direct sunlight, extreme
hot or cold temperatures or high humidity.
5. Avoid contact with corrosive chemicals or gas.
6. Clean the unit with a so dry cloth for daily use.
7. Wipe the plaorm and display using clean so cloth.
8. Do not use benzene, detergents or gasoline to clean the unit.
9. Avoid rough, scking cloth, to prevent scratching
the plaorm and screen panels.
10. Prevent water infiltraon affecng the
measurement accuracy.
11~400lb：±1%+0.1lb
External Dimensions Main unit: 320mm(d) x 320mm(w) x 31mm(h)
Weight Accuracy
Power Supply Weight Approx. 2 kg4 AA baeries
Operang Environment
Limit
Storage Environment
Limit
Temperature 5˚C to 35˚C
Humidity 30% to 85% RH
Temperature -20˚C to 60˚C
Humidity 10% to 95% RH
Display Content Weight: 11 ~ 400lb Graduaon: 0.1 lb
BMI: 0.0 ~ 150.0 Graduaon: 0.1 lb
Manual (Warranty card) , Connecng instruconsAccessories
Manufacturer : Charder Electronic Co., Ltd.
103 Guozhong Rd. Dayuan Vil. Dali District. Taichung City. Taiwan