Osram BY-P12 User manual

BY-P12 LED Fresnel Light
300W RGBAL 5in1 IP65LED Fresnel Light
(with Auto zoom)
User manual
P le ase rea d t he ins t r u ction s ca refu ll y before use

2
TABLE OF CONTENTS
1. Technical Specifications ..........................................................3-4
2. Description .................................................................................4
3. Unpacking ..............................................................................5-6
4. Main Menu ..............................................................................6-7
5. Vice Menu ..............................................................................7-9
6. DMX Channels .....................................................................9-11
7. Size................. ........................................................................12
8. Fixture Cleaning .......................................................................13
9. Warning ....................................................................................13
Statement
This New IP rated LED fixture-IP65 waterproof housing, warm white or
cool white with high CRI make it an ideal LED replacement for aging
incandescent light. This model offers everything should come to expect,
including auto zoom from 15°-30° and auto focus, smooth shutter cuts by
DMX, electronic strobe , 16bit dimming and selectable dimming curve modes,
PWM from 500HZ to 25000HZ for matching any camera type.

3
1. Technical Specifications
Light Source:
LED POWER: 300W
LED Color: RGBAL 5IN1
Color Rendering Index(CRI): Ra≥90
LED Life Time: over 50,000 hours
Power supply:
Voltage: AC100-240V
Max.power: 300W
Optics:
Beam Angle: 15°-30°
Zoom Function: Auto zoom
Features:
Dimming Curve: 4 kinds dimming curve
PWM: 500HZ - 25000HZ optional
Strobe :1-25times/sec
Light body feature:
Light body: Die casting Aluminum
Touch screen: LCD with touch screen
Feature of housing: High quality fireproof ,corrosion-resistance, Oxidation
resistance
Control:
Control Protocol: RDM / DMX
Control System: DMX, Auto run and Master/Slave

4
DMX Channels: 6/13CH (Two kinds of channel modes optional
Working Environment :
Working Temperature: -30~40℃
Cooling system: Fan-less no noise
IP Grade: IP65
Package :
Dimensions: 520.1(D)*306.7(W)*473.9(H)mm
Net Weight: 13kgs
Gross Weight: 16kgs
Packing size: 67*38.5*39cm(1pc/carton)
2. Descriptions
··RGBAL 5in1 fresnel light fixture for theatre, film and production
·Fully IP65 rated for seasonal use indoors or out
·Electronic auto zoom from 15°-30°
·Ultra smooth 16-bit dimming of master dimmer and individual colors
·Soft and even field of light
·High brightness with high CRI
·RDM (Remote Device Management) for added flexibility
·Adjustable PWM (Pulse Width Modulation) to avoid flickering on camera
·Selectable dimming curve: Standard mode, Incandescent mode, quick mode
and linear mode
·Fanless(no any noise) operation for use in studio and theatre applications

5
3. Unpacking
Thank you for choosing our F12. For your own safety, please read this manual
before installing the device. This manual covers the important information on
installation and applications. Please install and operate the fixture with following
instructions. Meanwhile, please keep this manual well for future needs.
The F12 is made of a new type of high temperature strength of cast aluminum
casing with nice outlook. The fixture is designed and manufactured strictly
following CE&RoHS standards, complying with international standard DMX512
protocol. It's available independently controlled and linkable with each other for
operation. And it is applicable for large-scale live performances, theater, studio,
nightclubs and discos.
The F12 adopts 1PCS 300W COB LED (RGBAL) which features high brightness
and stability. Please carefully unpack it when you receive the fixture and check
whether it is damaged during the transportation. And please check whether the
following items are included inside the box:

6
4. Main Menu

7
Operation Status
Mode
Displ
ay
Description
DMX
Mode
Master-sla
ve
Axxx
“A”stand for standard channel mode, “xxx”stand for ID
address, Auto identify controller signals or host signals
Dxxx
“D”stand for basic channel mode, “xxx”stand for ID address,
Auto identify controller signals or master signals
Manual
M-MC
“M”stand for Master mode，“MC”stand for “Mixed Colort”
Auto run
M-Ax
“M”stand for Master mode ，“A”stand for “Auto”, “x” is Auto
program number(1~8)
Sound
activated
M-Sx
“M”stand for Master mode，“S”stand for “Sound”, “x” is Sound
activated (1 or 2)
Color
Temperat
ure
M-W
P
“M”stand for Master mode，“WP”stand for“White Point”
Select
Color
M-QC
“M”stand for Master mode，“QC”stand for“Quick Color”
5.Vice Menu
DMX Settings status
Menu
Operation
Option
Description
DMX Start
Address
Press key of “OK” enter to
edit mode, press “UP”
and ”down” to edit the DMX
address
1~512
DMX Profile
Press key of “OK” change
the DMX channel mode
13CH
Standard Channel Mode
6CH
Basic Channel Mode

8
Master Mode Choice
Menu
Operation
Vice Menu description
Mixed
Color
Press Key of “OK” to choose
mode
Choose the color and strobe setting
Auto Mode
Same as above
Choose the Auto and Speed setting
Sound
Mode
Same as above
Choose the Sound and Mode setting
White
Point
Same as above
Choose the color temperature
Quick
Color
Same as above
Choose the built-in color
Status
Menu
Description
Software
Name of software
Version
Version
Temperature
Show the temperature of lighting fixture
DMX Status
With“OK”（Slave mode，with signal），“NONE”（Slave mode，no
signal）、 “Master”（Master）
Settings
Menu
Operation
Option
Description
Touch Screen
Calibration
Touch screen
adjust
White Point Edit
Color
temperature
adjust
Dimmer
Change the
500Hz

9
Frequency
dimmer
frequency
......
25KHz
Dimmer Curve
Change
dimmer curve
Standard
Incandescent
Linear
Quick
Over
Temperature
Temperature
setting
80~100
Each 5 for increase
or decrease
Backlight
Adjust the
display
brightness
10%~100%
Each 5% for increase
or decrease
Backlight
Timeout
Screen protect
setting
No screen protect
or black screen
from 0~ 60 second
Each 5 for increase
or decrease
Load Factory
Settings
Reset
6.DMX Channels
Standard channel mode(13CH)
Channel
Data
Function
Remark
1
0~255
Dimmer
2
0~255
Color 1
3
0~255
Color 2
4
0~255
Color 3
5
0~255
Color 4
6
0~255
Color 5

10
7
0~9
No function
10~19
Color Temperature 2700K
20~29
Color Temperature 3000K
Each 10 data for each color
temperature
30~39
Color Temperature 3200K
40~49
Color Temperature 3600K
50~59
Color Temperature 4000K
60~69
Color Temperature 4200K
70~79
Color Temperature 4500K
80~89
Color Temperature 5600K
90~99
Color Temperature 6000K
100~109
Color Temperature 6500K
110~119
Color Temperature 7200K
120~129
Color Temperature 8000K
130~139
Color Temperature 9000K
140~149
Color Temperature 10000K
150~159
Color Temperature 12000K
160~169
Custom color temperature
one
170~179
Custom color temperature
two
180~255
Custom color temperature
three
8
0~9
Null
10~19
built-in color 1
……
built-in color n
Each 10 data for each built-in
color
9
0~10
No function
11~255
Strobe speed （255 is the

11
fastest）
10
0~9
Null
10~19
Auto 1
......
Auto 2~7
Each 10 data for one auto
80~89
Auto 8
90~199
Null
200~219
Sound 1
220~255
Sound 2
11
0~255
Zoom
12
0~255
Speed of zoom
0 is the fastest, 255 is the
slowest
13
0~255
Reset of zoom
Pushrod will back to the
top(255) and stay for 5
seconds
Basic channel mode(6CH)
Channel
Data
Function
1
0~255
Color 1
2
0~255
Color 2
3
0~255
Color 3
4
0~255
Color 4
5
0~255
Color 5
6
0~255
Zoom

12
7. Size
Size of the fixture: 520.1(D)*306.7(W)*473.9(H)mm

13
8. Fixture Cleaning
Before disconnecting the lighter or starting maintenance work, ensure that
the power supply of the light is turned off to maintain the maximum brightness
output of the light, and it can also prolong its service life. It is recommended to
use high-quality professional glass cleaner and to clean it with cloth. Alcohol or
chemical solvents are not allowed under any circumstances. The interior of the
lamp is vacuum-cleaned at least once a year.
9.Warning
Do not disassemble or modify light fixtures
Do not expose the fixture to water or any other kind of liquids and metals
Do not install the lamp in a hot environment
Do not shoot the light beam on flammable materials. The distance between
the light fixture and flammable material should be at least 2 meters.
The distance between the lamp and the surface of the adjacent object should
be at least 0.5 meters.
Do not look directly at the beam of the follower lamp, as it may cause eye
damage
Before opening the chasing light product or want to repair work, please make
sure that the power is off