Oster Pro3000i User manual

PAGE 1 OF 3
Oster®Pro3000i
CORDLESS LIION CLIPPER
The Oster® Pro3000i is a cordless high performance Grooming clipper that gets through the toughest
coats. This heavy duty cordless lightweight clipper features a detachable Lithium Ion battery that runs
up to 2 hours providing the freedom of movement you need. The Oster® Pro3000iis compatible with all
A5™ blades, including wide blades.
FEATURES & BENEFITS
• Powerful Single Speed Heavy Duty Universal Rotary Motor
• Quiet motor provides smooth quiet and reliable performance while grooming.
• High power, environmentally friendly, Lithium Ion battery provides continuous power and holds a longer charge.
• Powered blade speed 3000 strokes per minute
• Lightweight Ergonomic Design for easy hold and maneuverability
• Compatible with Oster A5 detachable blades, Shear Magic detachable blade steel and ceramic
• 1 Year Warranty
EXTRA INFO
Brand: Oster
Model Pro 3000i Code:3000i
Speed: One
Strokes per min 3,000
Type Motor DC Rotary motor
Watts 45
Battery: Lithium Ion up to 2 hr
Blade Type Compatible with all A5 detachable universal blades
Charge time: 60 min
Weight (without blade) 385g
Warranty 1 year against any manufacturing fault
HEAVY DUTY CLIPPER
Universal Fits all A5 style
Detachable Blades
CORDLESS
INCLUDED ACCESSORIES
• Charging Stand
• A/C Adapter
• Lubricating Oil
• Carbon Brush
No blade set included
Clips any dog -
must have
correct blade
and clean dog

PAGE 2 OF 3
OSTER PRO3000i
FAQ
How do I properly remove the blade from my clipper?
Your blade is attached to a hinge assembly. To remove the blade
(A5 detachable blade) hold the release latch assembly by manually
pushing the latch forward and take the blade away from the clipper
head. You can slide the blade off the hinge and replace the new
blade on the hinge. Your hinge should stay open 45. Failing this you
have to use a screwdriver to re-open the hinge assembly.
How do I get my blade back on my clipper?
First, ensure that the rectangular metal “tongue” or blade hinge
assembly is in standing position or open. If it is closed, insert a flat
head screwdriver under the tongue and applying enough force,
push the hinge back to standing position. Once this is complete,
slide the blade on the tongue, turn your clipper on and push the
blade down and snap the hinge assembly closed. This will ensure
the proper engagement of the blade on the driving tip. If you have
any further questions, please call us.
FULL SPARE PARTS AVAILABLE FOR SALE
FROM BOTANY BAY IMPORTS
Phone: [phone]
Fax: [phone]
[e-mail]
botanybayimports.com.au
Follow us on Social Media
TheClipperSpecialist
Botany Bay The Clipper Specialists
botanybayimports
My blade doesn’t cut
Performance of blade – if the lever is worn, this will affect
the cutting performance, because it will not throw the cutter
sufficiently left to right to do the proper cutting. At this instance
lever must be change
How do I grease my clipper?
It is important to check the gearbox to ensure you have enough
grease in your gearbox. In order to grease the clipper, remove the
casing to access to the gear box. This will allow you to determine
if the clipper needs to be greased. If clipper does need grease, use
about 1/2 teaspoon. Make sure the grease covers the gears. Most
of our products come packed with a grease tube.
Why does my blade rattle on my clipper?
Over time the socket on your blades
may have become damaged. Check
the “wings” on your blade socket to
see if they may be bent outward or
broken.

PAGE 3 OF 3
OSTER PRO3000i
Trouble Shooting
Malfunction Cause Rectification
Top blade does not move Clipperhead is not well engaged Engage the clipperhead correctly when the motor is running
Drive lever is defective Replace drive carrier (*)
Clipper cuts badly or not at all
Clipper blade is blunt Have top and bottom blades resharpenend by service center (*)
Clipper blades have not been correctly ground Have top and bottom blades resharpenend by service center (*)
Clipper blades are not oiled Oil clipper blades every 15 minutes
The animal‘s hair is wet Only clip dry hair
Hairs jammed between top and bottom blades Take off clipperhead, push the top blade half away from the clipperhead, take away
hairs between top and bottom blade
Clipperhead has too little clipping pressure Have clipperhead inspected (*)
Motor is not running
Battery flat Charge battery
Contacts dirty Switch clipper off and clean the contacts
Faulty battery Replace battery (*)
Smell of burning from the motor housing. Motor burned out. Have motor and / or electronics replaced (*)
Motor and / or electronics faulty Have motor and / or electronics replaced (*)
Clipperhead blocked Clean and oil clipperhead
Motor runs very slowly Clipper blades were not oiled sufficiently Oil clipper blades
Running time of a fully charged battery is
too short and / or blades are getting hot
Clipper blades were not oiled sufficiently Oil clipper blades
Flat, not fully charged or faulty battery is being used Only use intact, fully charged original batteries
The control light of the charging station in not on Charging station is not connected to the power supply Connect the charging station to the power supply
Charging station is faulty Have charging station inspected (*)
When charging flat battery the light does
not change from green to red
Contacts dirty Clean contacts
Faulty battery? Replace battery (*)
Contacts of the charging station are deformed Have the charging station repaired (*)