Oticon Medical Ponto User manual

Buttons on the Ponto Streamer
The neck loop is an integral part of the Ponto Streamer’s
electronic system. It is used as an antenna to transmit
sound to your sound processor.
For best possible sound and longest possible streaming
time, the Ponto Streamer should always be worn with one of
the included neck loops, as in the above figure.
More information:
Please see page 18 in the Instructions for Use
Insert the cable from the enclosed charger in
the micro USB socket in the bottom of the Ponto
Streamer.
Charging is indicated by the blinking green on/
off indicator on the top.
We recommend that you charge the Ponto
Streamer daily e.g. during the night.
More information:
Please see page 24 in the Instructions for Use
Charging the Ponto Streamer
Please read this user guide
before you start using your Ponto Streamer
Your Ponto Streamer
Neck loop – medium Neck loop – long
Instructions for Use (IFU)Getting Started (this document)
Box 2
Box 4
Skin
(see page 68 in IFU)
Introduction
Thank you for choosing our product.
The Ponto Streamer offers a wide range
of communication possibilities for your
Ponto Plus sound processor.
This Getting Started describes how you
can use your Ponto Streamer with the
neckloop attached. For detailed informa-
tion, secondary functions or more
advanced functions please refer to the
included Instructions for Use, or the
documentation, including instructional
videos online:
www.oticonmedical.com/connectline
Long
Medium
Box 1
The Ponto Streamer box contains the
following elements:
Charger
(see page 24 in IFU)
Wearing the Ponto Streamer
Microphone
Volume control
(up/down)
Neck loop
in/out
Phone
TV
AUX selector
On/off
3.5mm mini jack
stereo cable
for MP3/music
(see page 54 in IFU)
USB cable for
charging via e.g.
computer (see
page 24 in IFU)
3.5mm splitter
cable for use with
PCs (see page 56
in IFU)
PontoTM – The Bone Ancho red Hearing System
Ponto Streamer
Instructions for Use
Buttons on the Ponto Streamer
The neck loop is an integral part of the Ponto Streamer’s
electronic system. It is used as an antenna to transmit
sound to your sound processor.
For best possible sound and longest possible streaming
time, the Ponto Streamer should always be worn with one of
the included neck loops, as in the above figure.
More information:
Please see page 18 in the Instructions for Use
Insert the cable from the enclosed charger in
the micro USB socket in the bottom of the Ponto
Streamer.
Charging is indicated by the blinking green on/
off indicator on the top.
We recommend that you charge the Ponto
Streamer daily e.g. during the night.
More information:
Please see page 24 in the Instructions for Use
Charging the Ponto Streamer
Please read this user guide
before you start using your Ponto Streamer
Your Ponto Streamer
Neck loop – medium Neck loop – long
Instructions for Use (IFU)Getting Started (this document)
Box 2
Box 4
Skin
(see page 68 in IFU)
Introduction
Thank you for choosing our product.
The Ponto Streamer offers a wide range
of communication possibilities for your
Ponto Plus sound processor.
This Getting Started describes how you
can use your Ponto Streamer with the
neckloop attached. For detailed informa-
tion, secondary functions or more
advanced functions please refer to the
included Instructions for Use, or the
documentation, including instructional
videos online:
www.oticonmedical.com/connectline
Long
Medium
Box 1
The Ponto Streamer box contains the
following elements:
Charger
(see page 24 in IFU)
Wearing the Ponto Streamer
Microphone
Volume control
(up/down)
Neck loop
in/out
Phone
TV
AUX selector
On/off
3.5mm mini jack
stereo cable
for MP3/music
(see page 54 in IFU)
USB cable for
charging via e.g.
computer (see
page 24 in IFU)
3.5mm splitter
cable for use with
PCs (see page 56
in IFU)
PontoTM – The Bone Anchored Hearing System
Ponto Streamer
Instructions for Use
PontoTM – The Bone Ancho red Hearing System
Ponto Streamer
Getting Started
137336_ US / 2013.07
Manufacturer:
Oticon A/S
Kongebakken 
 Smørum
Denmark
Phone: +    
[e-mail]
Distributor:
Oticon Medical A B
Ekonomivägen 
SE-  Askim
Sweden
Phone: +    
[e-mail]
0000137336000001
PontoTM – The Bone Anchored Hearing System
Ponto Streamer
Getting Started
137331UK / 2015.05
Manufacturer:
Oticon A/S
Kongebakken 
 Smørum
Denmark
Phone: +    
[e-mail]
Distributor:
Oticon Medical AB
Datavägen B
SE-  Askim
Sweden
Phone: +    
[e-mail]
0000137331000001

0000
Power on
Press the on/off button for
approx. 2 seconds until all front
lights are on, and the on/off
indicator on the top is green.
Power off
Press and hold the on/off button
for approx. 2 seconds until the
green on/off indicator is turned
off.
Pairing the Ponto Streamer
Before the Ponto Streamer can be used with
other devices – such as a cell phone – the two
devices have to be paired.
Put the Ponto Streamer in pairing mode.
Press and hold the on/off button for approx. 5
seconds, until the on/off indicator blinks blue.
The on/off indicator will switch to steady blue
to indicate successful pairing.
Both the Ponto Streamer and the second device
need to be in pairing mode. The pin code for
the Ponto Streamer (if requested) is 0000 (four
zeros).
More information: page 22 in the Instructions for Use More information: page 32 in the Instructions for Use
More information: page 39 in the Instructions for Use
Mobile phone
Answer a call
When your mobile phone rings, you will
hear an incoming call alert in your sound
processor, and the phone button on the
Ponto Streamer and the status indicator
will blink green.
Press the phone button briefly
to answer the call.
Off/on for surrounding sounds
Press and hold volume up AND volume
down buttons for approx. 1 second
simultaneously.
Reject call
An incoming call can be
rejected by briefly pres-
sing the volume down
button.
Make a call
To make a call you only
need to operate the cell
phone. The call is
automatically con-
nected to your Ponto
Streamer.
Microphone
T-coil
The Ponto Streamer has a
built-in tele loop receiver
(T-coil).
To receive sound from the
tele loop receiver press and
hold the AUX selector for
approx. 2 seconds.
More information: page 62 in the Instructions for Use
Remote control of the
sound processor
The Ponto Streamer functions as
a remote control for your sound
processor when not used
for streaming.
Volume up/down
Press briefly up or down
Change program in the
sound processor
Press & hold up or down
More information: page 30 in the Instruction for Use
Music
You can listen to music via the mini jack cable at
the bottom of the Ponto Streamer or wireless via
Bluetooth.
Music is chosen by a brief
press on the AUX selector.
More information: page 54 in the Instructions for Use
ConnectLine microphone
Note: requires additional equipment.
Makes it possible to transmit sound
from a chosen speaker to your
sound processor through the Ponto
Streamer.
Press the microphone button
briefly to activate the microphone.
More information:
www.oticonmedical.com/connectline
Phone solution
Note: requires additional equipment.
Makes it possible to use
the Ponto Streamer with a
traditional analog landline
phone.
Press the phone button briefly
to take a call.
More information:
www.oticonmedical.com/connectline
TV solution
Note: requires additional equipment.
Makes it possible to transmit
the sound from a TV to your
sound processor through the
Ponto Streamer.
Press the TV button briefly
to activate the TV.
More information:
www.oticonmedical.com/connectline