Outdoor GreatRoom Company Kenwood KW-LB User manual

42487 REV A 11.08.17
Kenwood Collection Benches
Installation Instructions For:
KW-LB & KW-SB
SAVE THESE INSTRUCTIONS
When using the furnishing, basic precautions should always be followed, including the following:
Read all instructions before using benches
Use the furnishing only for its intended use as described in these instructions.
Included in Packaging
Top (1X)
(Top for KW-LB pictured)
Legs (4X)
Hex Wrench (1X)
KW-LB
KW-SB
Touch-Up Paint Bottle (1X)

Assembly Instructions
NOTE: Before assembly, check for damage. Do not use damaged components.
1. Unpack all the contents from the box and remove the individual packaging from each component.
2. Carefully lay the Top, with underside facing upwards, on a soft and flat surface.
3. Slide the legs over tightening mechanism located in each corner of bench top. Using provided hex wrench, tighten the screws to
secure legs to bench top. Do a final tightening of all screws to fully secure legs.
4. Once all legs are secure, flip bench over.
Care and Maintenance Notes:
•Light scratches may be removed from the poly-wood surfaces of this fire pit by gently sanding with 220-grit sandpaper in the
same direction as the grain. Sanding too deeply or not following the grain of the material could result in permanent damage.
•Occasional tightening of screws may be required with regular use.
14400 Southcross Drive West •Suite 100 •Burnsville, MN 55306
Toll Free: 1-866-303-4028 •[e-mail]
Thank you for purchasing an Outdoor GreatRoom Company
product! This product was made with pride in the USA.
42487 REV A 11.08.17