overstock 317-9X User manual

Assembly Instruction
Item# 317-9X
Free Standing Ladder Desk with Drawer
Page1 of 6

Parts List
Hardware
Part List
RF10034
JCB M6 x 50
x 8
RF10052
JCB M6 x 30
x 4 x 10
x 3x 1
x 2 x 2 x 2
x 1
RF10002
F6 x 1 1/4”
RF40103
Allen Key
RF10003
JCA1/4”x 32
RF40008
Knob
Page 2 of 6
A1
A2
B1
C1
B2
C2
C3
D
E
F
G
H
Anti-Tipping
Screw P6 x 5/8”
RF10080
Screw P6 x 1 1/4”
RF10103
Metal Plate
RF40214
A1
A2
B1
B2
C1
C2
C3
D
E
F
G
H
Lower Left Leg
Upper Left Leg
Lower Right Leg
Upper Right Leg
Back Base Bar
Left Base Bar
Right Base Bar
Top Crossbar
Top Shelf
Middle Shelf
Bottom Shelf
Drawer
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.

RF10034
x 4
Page 3 of 6
A1
A2
B1
B2
C1
C2
C3
Step1:
Assembly the Leg by attach Lower Left Leg (A) to the Upper Left Leg(A1)
and Lower Right Leg (B1) to Upper Right Leg (B2) by using screw (RF10034)
as per diagram 1.
Step2:
Assembly the Base Bar by attach Back (C1), Left (B2) and Right (C3) together
by using screw (RF10003) as per diagram 2.
RF10003
x 2
Diagram 1.
Diagram 2.

Page 4 of 6
G
FED
Step 3:
Attach Top Crossbar (D), Top Shelf (E), Middle Shelf (F) and Bottom Shelf (G)
into the Right Leg Unit (B) by (D) to (B) using Screw (RF10002), (E) and (F) to (B)
using Screw (RF10003) and (G) to (B) using Screw (RF10052) as per diagram 3.
Step 4:
Repeat step 3. Attach Left Leg (A) into the unit as per diagram 4.
RF10003
x 4
RF10052
RF10002
x 2
x 1
Diagram 3.
Diagram 4.
B
A

Page 5 of 6
Step 5:
Attach Base Bar (C) into the unit
by using Screw (RF10052) as per diagram 5.
Step 6:
Attach Knob (WD40008) into the Drawer (H)
by using Screw (RF10002), then insert
the drawer into the position as per diagram 6. Diagram 6.
Diagram 5.
RF10034
x 4
RF10002
x 1
WD40008
x 1
C

Page 6 of 6
Anti-Tipping
To attach the shelf to the wall,
Use Metal Plate (RF40214)
and screws P6x 5/8”(RF10080)
to attach the top crossbar thru the studs
into the wall, using screws P6 x 1 1/4”
(RF10103) as per Diag.5.
RF40214
RF10080
RF10103
Diagram 7.
Wall
Wall