overstock WF300860 User manual

ASSEMBLY INSTRUCTIONS
NOTE: 50% TIGHTEN BEFORE FIXING ALL BOLTS
DAYBED WITH CUSHIONS
WF
300860
WF
300861

Notice:
1. 50% Tighten before fixing all screws, Allen wrench is recommended instead
of an electric drill.
2. Place the item on a flat ground to adjust and make sure it remains stable
3. Tighten up all screws with tools gradually.
4. If the screws are not aligned with holes during assembly, please loosen all
the other screws to 50% and continue the assembly process.
5. If the item is not stable, please loosen all the screws, adjust it on a flat ground
and tighten up all screws again.
6. Note : If one or some screws are fully tightened during assembly, chances are
the others will not be aligned with holes. In addition, all the holes are designed
to be relatively larger to provide more space for the adjustment of the screws.
2
(1 x Stool)
C
M
L
I
A
N
H
G
J
K
(1 x Bench)
O
O
P
P
D
F
E
B

3
Part List
A B C
D E F
G H I
K
Bench Back Frame (1 pc) Hip Back Frame (1 pc)
Arm Right Frame (1 pc) Bench Seat Frame (1 pc)Arm Left Frame (1 pc)
Leg Right Stool (1 pc)
Stool Seat Frame (1 pc)Bench Back Side Frame (1 pc)
Stool Back Side Frame (1 pc)
LJ
Leg Left Stool (1 pc) Stool Front Side Frame (1 pc)
Hip Back Frame (1 pc)

Stool Seat Cushion (1 pc)Stool Shelf Frame (1 pc)
4
Part List
1 2 3
Bolt M6 x 30 mm
4 pcs + extra 1 pc
M N
Hardware List
Bolt M6 x 35 mm
24 pcs + extra 2 pcs
Allen key M4 (2 pcs)
4 5 6
O
P
Back Pillow (2 pcs)
Bench Seat Cushion
Bolt M6 x 40 mm
6 pcs + extra 1 pc
M6 x 1 mm Washers
34 pcs + extra 3 pcs
M6 x 20 x 5 mm Washers
2 pcs + extra 1 pc
M6 x 20 x 15 mm Washers
4 pcs + extra 1 pc
7
M10 x 25 x 5 mm Washers
2 pcs + extra 1 pc
8
& Back Cushion (2 pcs)
Q
Cover cloth (1 pc)

5
CARTON CONTENT:
A x 1 B x 1 I x 1
J x 1
C x 1 D x 1 E x1 F x 1
G x1 H x 1 K x1 L x1
WF
P x 2 HARDWARE
M x1 N x 1 O x2
300860
WF300861
Q x 1

6
STEP 1 (1 x Bench assembly)
Connect Bench back frame (D) & Hip back frame (E), Hip back frame (F)
STEP 2
Connect Arm left frame (B) & Bench seat frame ( C) & Bench back side frame (G)
1*4
D*1 E*1
B*1 C*1
E
4
F
D
with Bolts (1) & Washers (4), (6)
with Bolts (2), (3) & Washers (4)
4
4
4
1
1
1
1
F*1 4*4 6*4
1
4
6
B
C
G
G*2
3
3
3
2
2
444
4
4
3*3 2*2 4*5

7
STEP 4
Connect part from Step 3 & Arm right frame (A) with Bolts (2), (3)
7*1
7
D
STEP 3
Connect part from Step 2 & part from Step 1 with Washers (7)
2
with Bolts (2), (3) & Washers (4), (7)
7
D
A
2
4
4
4
4
4
3
3
3
A*1 3*3
2*2 4*5
part from Step 1
7*1

8
STEP 5
Put on Bench Seat Cushion & Back Cushion (O) & Back Pillow (P)
to complete Bench
E
P
O
O
P

9
2*3
I
L
H
2
2
2
2
2
2
2
4
4
4
4
4
4
4
2
2
2
J
4
4
4
STEP 6
Connect Stool seat frame (H) & Leg right stool (I) & Stool back side frame (L)
with Bolts (2) & Washers (4)
2*7
L*1 H*1 I*1 4*7
STEP 7
Connect part from Step 6 & Leg left stool (J) with Bolts (2) & Washers (4)
J*1 4*3

10
2*2
STEP 8
Connect part from Step 7 & Stool Shelf frame (M) with Bolts (2) & Washers (4)
2*8
M*1 4*8
STEP 9
Connect part from Step 8 & Stool Front side frame (K) with Bolts (2)
K*1 4*2
M
2
2
2
2
22
2
2
4
4
4
4
44
4
4
K
5
5
2
2
4
4
with Bolts (2) & Washers (4), (5)
5*2

N
STEP 10
Put on Stool Seat Cushion (N) to complete Stool
11
Take back frame down lowest and cover the product with
Cover cloth (Q) when not in use

Combination and Arrangement
12
FINISH