overstock DINING CHAIR User manual

ASSEMBLY INSTRUCTION
E913C DINING CHAIR
1
AC
B D
1pc 2pcs 4pcs
Chair Body Front Leg Flat Washer
Ø36xØ10x3mm
Back Leg
2pcs
This page lists all the contents included in
the box. Please take the time to identify
the hardware as well as the individual
components to this product.
As you
unpack and prepare for assembly, place
the contents on a carpeted or padded
area to protect them from damage.

2
1Assemble the Front Leg (B) & Back Leg (C) to the Chair Body (A) with Flat Washer
(D) properly.
Stand chair up on an
even surface and check
that it is balanced. If
there is a slight wobble,
apply downward
pressure in the corner
where a leg is uneven.
Keeping pressure in
that corner, tighten all
bolts. If balanced, apply
downward pressure
evenly in the center and
tighten all bolts.
Do not over-tighten
beyond hole depth.
Helpful Tip:
-Instead of applying
downward pressure while
reaching under to tighten
bolts, have someone sit in
the chair while you tighten
the bolts.
Cleaning & Care
Treat surface with care. Surface is resistant to scratches but is not scratch resistant.
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware
may loosen over time. Periodically check that all connections are tight.
B
C
A
D
C
B