OYPLA Home 4030 User manual

User Manual
USER MANUAL Model No: 4030
Sausage Stuffer

•Before using the product, make sure all fastenings are tightly in place and that
everything is in order, and checked periodically by an adult.
•Never carry out any alterations or modifications to this product.
•This product is not a toy, and is only to be used for its designated purpose.
•This product is intended for indoor use only.
•Do not overfill the product.
•Only use this product on stable, level and dry ground.
•Make sure that the rear cover is on correctly to avoid it becoming loose and
causing sausage meat to spill from the product.
•Make sure that the suction base is secured to the desired surface before use.
•This product is not intended for use by persons (including children) with reduced
physical, sensory and mental capacities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
product by persons responsible for their safety.
•Clean only with a damp cloth. Do not use strong industrial cleaning substances or
abrasive materials as these will damage the product.
•If the product is damaged or has any defects, please contact [email protected]
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold on
this condition, which no representative of the company can waive or change.
USER MANUAL Model No: 4030
Please retain a copy of all
instructions for future consultation.

USER MANUAL Model No: 4030
USER MANUAL Model No:
Operating Instructions
Parts List:
If you are missing any of the below parts please contact [e-mail]
Please be aware that you will be referring to this parts list throughout the assembly
process.
Parts List:
If you are missing any of the below parts please contact [email protected]
Please be aware that you will be referring to this parts list throughout the assembly process.
1. Push the handle onto the set screw, ensuring that is it secure before use.
2. Remove the front screw ring from the body of the aluminium sausage maker, making sure that you hand clean the
inside of the aluminium sausage maker after doing so.
3. After this, slide a funnel head into the funnel base, ensuring that the funnel head is as far into the funnel base as
possible. Put the sausage meat you are using into the body of the aluminium sausage maker. Place the funnel base
into the opening of the body created by removing the front screw ring. Make sure to push the joystick forward to
allow the suction base to stick to the desired surface.
4. Slip the sausage skin over the funnel head, ensuring that it is placed correctly to avoid any sausage meat spilling
out of the sausage skin or the funnel head.
5. Turn the handle clockwise to push the meat into the funnel and therefore into the sausage skin. Be careful when
doing this as too much sausage meat will create a mess.
6. Once done, unscrew both the front screw ring and the rear cover, pull the spiral spindle out and wash all parts
used thoroughly to avoid cross contamination of food.
USER MANUAL Model No: