Oypla Leisure 3128 User manual

Page 1
Manual Version: v1.0
Model Code: 3128
Oypla.com LLP / www.oypla.com
User Manual
Model Code: 3128
Contents
1Front Cover
-
2Safety
Instructions
-
3Assembly
Instructions
-
3Operating
Instructions
-
4Back Cover
End
Floor Standing
Magnifier Lamp

Page 2
Manual Version: v1.0
Model Code: 3128
Oypla.com LLP / www.oypla.com
Contents
1Front Cover
-
2Safety
Instructions
-
3Assembly
Instructions
-
3Operating
Instructions
-
4Back Cover
End
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold
on this condition, which no representative of the company can waive or change.
•Make sure all fastenings are tightly in
place and that everything is in order
before using the lamp. This should be
periodically checked by a responsible
adult.
•Do not use this lamp if any of the wires,
plug or body are damaged.
•This product is not a toy, and is only to
be used for its designated purpose.
•To protect against electrical shock, do
not immerse cord, plug or any part of
this appliance in water or any other
liquid.
•Clean only with a damp cloth. Do not use
any harsh or abrasive chemicals or
substances, as these may damage the
product.
•Ensure the power supply to the socket
into which the appliance is plugged, is in
accordance with the rating level on the
appliance, and that the socket is earthed.
•When the appliance is not in use, always
unplug from the mains socket.
•Do not leave this product unsupervised.
If you have to leave the room, even for a
short while, ensure the product is
switched off.
•Ensure the appliance is securely installed
before operation.
•If the product is damaged or defective,
please contact cserv[email protected]
⚠Do not stare directly at the light. Doing
so may cause eye damage.
⚠Before cleaning the product, always
ensure it is switched off and unplugged.
⚠Risk of electrical shock –do NOT
immerse any part of this product in any
liquids.
⚠Do NOT use this product if any part of it
is damaged.
Warnings

Page 3
Manual Version: v1.0
Model Code: 3128
Oypla.com LLP / www.oypla.com
Contents
1Front Cover
-
2Safety
Instructions
-
3Assembly
Instructions
-
3Operating
Instructions
-
4Back Cover
End
Assembly/Operating
Instructions
1
Open the package, and take out the castor feet. Install the two metal stability forks,
and insert the supporting column in the middle. Install the screw into the bottom
and tighten it to stabilise.
2
The magnifier glass comes assembled to the holder. However, it needs attaching to
the base that you have assembled in step 1.
3
Adjust the magnifying glass to your desired angle. Turn on the power switch, and
you are able to start operating the machine after the bulb lights up.

Page 4
Manual Version: v1.0
Model Code: 3128
Oypla.com LLP / www.oypla.com
Contents
1Front Cover
-
2Safety
Instructions
-
3Assembly
Instructions
-
3Operating
Instructions
-
4Back Cover
End