PACIFIC CYCLE 2Rider User manual

2RiderAssemblymanual
2Rider
Assembly manual
(Picture shown with optional canopy and kid seats)
Canopy
Safety bar
Kid seats
Seats Handlebar
Grip shifter
Brake
Luggage tray
Rear wheel Front wheel
Suspension Pedal
Rear
deraileur
Bumper

2RiderAssemblymanual
2Rider features
•4 seats for 2 riders and 2 passengers.
•8 speed gears for effortless rides.
•Full suspension for max comfort and safety.
•Large luggage tray for drinks and luggage.
•Roof canopy to keep off sun rays.
•Easy to store and easy to maintain.
2

2RiderAssemblymanual
Specification
•Chassis Aluminum 7005T6, powder coated.
•Suspension All wheels independently suspended.
•Geometry Ackermann geometry, center point steering.
•Wheels 20”(406) hi-pressure tires, alloy rims and hubs.
•Gears Shimano 8 speed gears, 28~82” gear ratio.
•Seats Adjustable for riders, fixed for passengers.
•Brakes V brakes for front and rear.
•Wheel base 1.5M.
•Tracks Front 0.92M, rear 0.72M.
•Turing radius 2M.
•Dimension 2M long, 1M wide, 1.6M height.
•Weight Total 60kg including canopy 7kg, kid seat 7kg.
•Packing 1.7M x 1.06M x 0.38M
•Max load 200kg made up of 2 adults and 2 kids.
3

2RiderAssemblymanual
Step 1:
Take out all parts in the box and raise the chassis
about 40 cm height for ease of assembly work.
4
1
2
3
4
5
6
7 8
9
10
11
12
(1) Canopy
(2) Luggage tray
(3) 2 kid seats
(4) Bow assembly
(5) Kid seats stay
(6) Kid seat safety bar
(7) Right side seat
(8) Left side seat
(9) Bumper
(10)2 front wheels
(11)2 rear wheels
(12)Parts box

2RiderAssemblymanual
5
Step 2:
Insert the handlebar stem to the steerer, tighten
the clamp and the setting screw.

2RiderAssemblymanual
6
Step 3:
Connect the left steering link rod.

2RiderAssemblymanual
7
Step 4:
Assemble the pedals to crank arms at both sides.*
This step will not affect any other sub-assembly, you can decide do it now or later.
*Note: Always screw the “R” pedals on the
chainwheel side clockwise and the “L” pedals on
the crank side counterclockwise. Make sure they
are tightened.

2RiderAssemblymanual
8
Step 5:
Assemble the bow and front bumper to the chassis.

2RiderAssemblymanual
9
Step 6:
Assemble the front wheels to the front axle and
hook the front V brake cable.
*Tools needed:10mm Allen key wrench, 19mm open wrench.

2RiderAssemblymanual
10
Step 7:
Assemble the rear wheels to the rear dropouts and
hook the rear V brake cable.

2RiderAssemblymanual
11
Step 8:
Assemble the luggage tray.

2RiderAssemblymanual
12
Step 9:
Assemble the seats, and insert the grip shifter on
the right seat handlebar.

2RiderAssemblymanual
13
Step 10:
Assemble the kit seat to the kit seat stays, and assemble the
kit seat subassembly to the main chassis. Insert the safety bar.

2RiderAssemblymanual
14
Step 11:
Assemble the canopy.

2RiderAssemblymanual
15
Step 12:
Align the handlebar and front wheels, adjust the
derailleurs and brakes, and check all bolts and nuts
are tight. Note:Ifyouremovethecanopy,2Ridercanstanduptosavestoragespace.