Pakronics PAKR-A0464 User manual


Solar Boat
Principle:
Solar wheel oar ship is a very
interesting hand-made ship class
suite, this product is a use of solar
power forward wheel for ship. Only
need a simple DIY installation, can
produce the boat in the above and
the vessel using solar panels to
power supply, as long as there is
sunshine can keep moving.
Accessories:
1. Foam base
2-14:Wooden board
15:Motor
16:Wooden board
17:Solar panel
18:Screw
19:Gear
Warning:
CHOKING HAZARD-Small Parts. Not for
children under 3 years. It must be accompanied
by a parent or teacher while assembling.

Assemble boards 6 and 7 on
the boat and fix with screws.
Notes:
1) Remove the protective film of the solar panel
before using it.
2) The kit only can work under the sunshine,the
more sunlight, the faster the speed.
3) Pay attention to the direction of each board,
don’t assemble wrong.
4) The kit belongs to the science kits, which is
different from WOW or EXCITING toys.
Some kits’ functions need to be debugged
before they can work. Please be patient.
Assemble board 11.
Assemble another board 9.
Fix the gears on the board 8
with screws.
Assemble boards 10 on the board 8.
Fix the assembled last step to the
ends of the motor shaft.
Fix the motor in the middle of
board 2 and 12.Pass the short
shaft through the hole.
Assemble board 3 and 4.
Assemble board 5 on the
board 9 and fix with screws.
Assemble step 2 and 3.
Paste the solar panel on
the board 1.
Assemble another side as
last step.
Assemble base board 13 on the bottom
and fix with screws.
Assemble board 1 on the top
and take the solar panel wire
through the hole.
Paste the foam base on the bottom
of the boat. Finish and test under
the sunshine.