Pakronics PAKR-A0465 User manual

ASSEMBLY PROCESS:
Assemble 5 and 7
with white glue Assemble 4 and 6 with white glue
The narrow edge to
the hole is on
the top as the picture
shows.
Assemble the battery
holder,motor and
propeller as the
picture shows.
Completed
Assemble 2 to the
hole and install the
wheel.
1.When assembling the wood accessories, it needs to press them together slowly and firmly.
2.If the accessories are not firmly assembled, can stick them with white glue.
3.If the car move backward,please change the wire.
4.The kit belongs to the science kits, which is different from WOW or EXCITING toys. Some kits’
functions need to be debugged before they can work. Please be patient.
5.Friendly Tips: if repeatedly inserted, resulting the holes is not firm, you can use glue to paste it.
NOTES:
STEP 1 STEP 2 STEP 3
STEP 4 STEP 5

The power which can push
the car move is not the
electric power but the wind
power. The propeller run
fast and make a force to
the car,so the car move
forward. There are many
examples in our life for this
principle. The electric
fan,air conditioner,kitchen
ventilator,wind power
electricgenerator and
steamship are the same
principle.
Warning:
CHOKING HAZARD-Small Parts. Not for
children under 3 years. It must be
accompanied by a parent or teacher
while assembling.
1 propeller
2 axle
3 wheel
4 bottom board
5 top board
6 hole board
7 wooden bar
8 motor
9 battery holder
Experimental principle：
DIY ELECTRIC WIND POWER CAR