Pakton JVA PTE0240 User manual

JVA TECHNOLOGIES
www.jva-fence.com
4-Line LCD KeypaD

Page 2 © JVA Technologies Pty. Ltd. www.jva-fence.com
Contents
CONTENTS
1 Introduction.................... 4
2 Featuresandbenets. . . . . . . . . . . . . 4
3 Installation .................... 5
3.1 Opening the Keypad . . . . . . . . . . . . . . 5
3.2 Wiring . . . . . . . . . . . . . . . . . . . .5
4 Keypad Operation ................ 6
4.1 Discovering Energizers . . . . . . . . . . . . 6
4.2 Arming/Disarming the Fence . . . . . . . . . . 6
4.3 Display screens . . . . . . . . . . . . . . . . 7
5 Keypad Menu .................... 8
5.1 Main Menu . . . . . . . . . . . . . . . . . .8
5.2 MUTE SIREN . . . . . . . . . . . . . . . . .9
5.3 Event Log. . . . . . . . . . . . . . . . . . . 9
5.4 Test Menu. . . . . . . . . . . . . . . . . . . 9
5.5 Keypad Options . . . . . . . . . . . . . . . 10
5.6 Setting the Clock . . . . . . . . . . . . . . 10
5.7 Remember User PIN . . . . . . . . . . . . . 10
5.8 Program Device . . . . . . . . . . . . . . . 11
5.8.1 Detection . . . . . . . . . . . . . . . . . . 11
5.8.2 Device Selection Menu. . . . . . . . . . . . 11
5.8.3 Device Programming . . . . . . . . . . . . . 11
5.8.4 Sub-menu programming . . . . . . . . . . . 11
5.8.5 Save / Cancel changes . . . . . . . . . . . 12
5.8.6 Exiting Programming. . . . . . . . . . . . . 12
5.9 Program this Keypad . . . . . . . . . . . . 12
5.9.1 Exiting Keypad Programming . . . . . . . . . 12
5.9.2 Changing the Messages . . . . . . . . . . . 13
6 Group Connection ..............16
6.1 Using More Than One Keypad . . . . . . . . 16
6.2 Wiring . . . . . . . . . . . . . . . . . . . 17
7 Trouble Shooting ...............18

Page 3© JVA Technologies Pty. Ltd. www.jva-fence.com JVA Touch Keypad Manual
Contents
7.1 Factory Reset . . . . . . . . . . . . . . . . 18
7.2 The Keypad is Un-responsive . . . . . . . . . 18
7.3 Non-master Programming Issue . . . . . . . 18
7.4 The Zone names are corrupted. . . . . . . . 18
7.5 an Energiser is always in coms fail. . . . . . 18
8 Common Keypad Commands ........20

Introduction
Page 4 © JVA Technologies Pty. Ltd. www.jva-fence.com
1 INTRODUCTION
The JVA 4-Line LCD Keypad is an integral component in the JVA Security
Electric Fence product range. Providing a centralised interface between
-
-
to the customer’s needs.
2 FEATURES AND BENEFITS
•
• Displays arm/disarmed status and any trouble or alarm
•
•
• Programmable zone names
• Key area glows red on alarm
• Menu driven interface
•
• 500-entry Event-Log
•
• Event Log stores Date and Time of Alarm or Trouble
•

Page 5
Installation
© JVA Technologies Pty. Ltd. www.jva-fence.com JVA Touch Keypad Manual
3 INSTALLATION
OPENING THE KEYPAD
Push the 4 side tabs in to release the cover from the base. This can be done
the base.
3.2
-
itors as indicated.

Keypad Operation
Page 6 © JVA Technologies Pty. Ltd. www.jva-fence.com
4 KEYPAD OPERATION
User PIN: 1234
Installer PIN: 012345
Key 2 Key 3 Key 4
Discover Energizers/Monitors 6 8
The Keypad needs to discover all of the Energizers/Monitors connected
-
display will show “Analysing Group”, it will then list the discovered devices.
4.2
Site Arm. Press this followed by your user PIN to
arm the site
Site Disarm. Press this followed by your user PIN to
disarm the site
Menu. Press this followed by your user/installer PIN

Page 7
Keypad Operation
© JVA Technologies Pty. Ltd. www.jva-fence.com JVA Touch Keypad Manual
4.3
status of each device connected to the Keypad.
Summary Screen
Number
The Installer’s Details (Dealer Message)
2
3 Site is Armed/Part Armed or Disarmed
4 If the site is in Alarm/Trouble or All OK
Energizer Screen
Number
2The Energizer Voltages
3 Alarms/Troubles are displayed here
-

Keypad Menu
Page 8 © JVA Technologies Pty. Ltd. www.jva-fence.com
5 KEYPAD MENU
MAIN MENU
The Main Menu contains the following list of entries. Use the Up and Down
-
Menu
Mute Siren Mutes Energiser/Monitor Sirens currently sounding
Clear Alarms Sends the Clear Alarm Memory command to the En-
ergizers/Monitors
Show Event Log
Arm Low Power Arm the Site in Low Power Mode
Arm High System Arm the Site in High Power Mode
Test Menu
Show Shortcuts -
ence
PIN
Saves the PIN so that the Menu, Arm and Disarm
Menu The following Menu items are only visible when the
Installer PIN is used to access the Menu
Program Device
Program Sectors
Clear Event Log
Program this
Keypad
Default User PIN This will return the User PIN of connected devices to
Default Keypad Factory Default this Keypad
Calibrate Device

Page 9
Keypad Menu
© JVA Technologies Pty. Ltd. www.jva-fence.com JVA Touch Keypad Manual
5.2
that support this command will mute their siren.
5.3 EVENT LOG
Event Log Screen
-
arm commands.
Each event is displayed on a separate screen that is viewed by pressing the
5.4 TEST MENU
Menu
Analyse Group Discovers the Energizers connected to the Keypad
Siren Test Turns on the Energiser/Monitor Siren Outputs for 2
seconds
Monitors. See the LCD display of the Energiser for
the results
Show Keypad Ver Displays the Keypad Version
Forces the Energizers to reset

Keypad Menu
Page 10 © JVA Technologies Pty. Ltd. www.jva-fence.com
5.5 KEYPAD OPTIONS
Menu
Press Beeps
Chime Sounds Turns ON/OFF the Gate Chime Sounds
Error Sounds Turns ON/OFF the Error Sounds when entering a PIN
for Energiser control
Alarm Sounds Turns ON/OFF the Keypad Beeper sounding for a
new Alarm/Trouble
/ OFF)
5.6 SETTING THE CLOCK
Seng the Time and Date Screen
-
update.
Menu will also be displayed when pressed.
This menu will change to Forget User PIN, for when you need to enter an

Page 11
Keypad Menu
© JVA Technologies Pty. Ltd. www.jva-fence.com JVA Touch Keypad Manual
5.8
5.8.1 Detecon
the system cannot proceed to Menu Programming. It will however put
5.8.2 Device Selecon Menu
Device Selecon Screen
5.8.3 Device Programming
Device Programming Opons Screen
-

Keypad Menu
Page 12 © JVA Technologies Pty. Ltd. www.jva-fence.com
5.8.4 Sub-menu programming
Sub-Menu Opons Screen
Selecng Opons in the Sub-Menu Screen
-

Page 13
Keypad Menu
© JVA Technologies Pty. Ltd. www.jva-fence.com JVA Touch Keypad Manual
5.8.5 Save / Cancel changes
Saving Changes Screen
Cancelling Changes Screen
5.8.6 Exing Programming
Exit Programming Screen
-

Keypad Menu
Page 14 © JVA Technologies Pty. Ltd. www.jva-fence.com
messages to be altered. It also contains the Keypad Address.
•
•
•
•
•
5.9.1 Exing Keypad Programming
Key 2

Page 15
Keypad Menu
© JVA Technologies Pty. Ltd. www.jva-fence.com JVA Touch Keypad Manual
5.9.2 Changing the Messages
• The Dealer Message is displayed on the Summary page
• The Service Message is displayed on the Summary page during AC fail-
•
browser. Access
2
A B C 2
3
D E F 3
Emergency
Move Cursor
4
G H I 4
5
J K L 5
6
M N O 6
Arm
Move Cursor
8
T U V 8
Disarm
Upper Case
Character
Don’t save and
display previous
0
Save and display
Menu
Lower Case
Character
Text Seng (Mul Touch Entry)
-
-
ing the same Key.
•

Keypad Menu
Page 16 © JVA Technologies Pty. Ltd. www.jva-fence.com
• To enter JVA, you would press 58882
• To enter ACE, you would press 2 (pause for 2 seconds) 22233
-
move to the last message.
2 (Up Arrow)
Increase Value
3Emergency
456Arm
8 (Down Arrow)
Decrease Value
Disarm
Don’t save and
display previous
0
Save and display
Menu
Number Seng (Arrow Entry)
Keys. When the correct value has been selected (using the Arrows), press

Page 17
Group Connection
© JVA Technologies Pty. Ltd. www.jva-fence.com JVA Touch Keypad Manual
6 GROUP CONNECTION
devices.
-
If the security system is to use a PC based interface such as Perimeter Pa-
-

Group Connection
Page 18 © JVA Technologies Pty. Ltd. www.jva-fence.com
6.2

Page 19
Trouble Shooting
© JVA Technologies Pty. Ltd. www.jva-fence.com JVA Touch Keypad Manual
7 TROUBLE SHOOTING
Factory Reset?
# = Yes
-
JVA Security
10:07 01/12/15 25C
Armed Keypad
All Ok Not Polled
If the Summary Page displays “Keypad Not
Polled”, then it needs to be introduced to
If there is more than one Keypad on the site, someone may be using that
seconds and try again.
Something has gone wrong with the Keypad’s Internal Memory. Suggest
Has the Group ID of this Energiser been changed? Or has this Energiser
been removed from the Site? If so, the Keypad will need to re-Discover the
6.2

Page 20 © JVA Technologies Pty. Ltd.
Common Keypad Commands
JVA Touch Keypad Manual
8 COMMON KEYPAD COMMANDS
Key 2 Key 3 Key 4 Key 5 Key 6 Key 8
Arm/Disarm User PIN
Silence the Energiser Siren 40
Installer PIN 0
Installer PIN 0
User PIN 0
User PIN
User PIN 2 0
User PIN 2
User PIN 4
User PIN 4
User PIN 4 2
User PIN 4 2
Arm in Agricultural Mode User PIN
User PIN 6 8
Installer PIN 6 8
Table of contents