Palm Treo Treo 750 User manual

Getting Started Guide
Palm® Treo™ 750 smart device

Treo 750 i
Table of Contents
Welcome to AT&T 1
Overview: Your Palm®Treo™ 750 smart device 1
Take advantage of fast broadband speeds 2
Setup 3
Insert the battery 3
Complete setup 4
Navigation 5
Wake up the touchscreen and turn it off 5
Move around the touchscreen 6
Use the keyboard 8
Open, leave, and close applications 10
Your Today screen 11
Your phone 12
Turn your phone on and off 12
Make and receive calls 13
Set up voicemail 14
What can I do when I’m on a call? 15
Your web browser and email 16
Browse the web 16
Choose the best email option 17
Set up personal email 17
Set up corporate email 21
Create and send an email message 27

ii Treo 750
Synchronization 28
Why synchronize information? 28
Synchronize for the first time 28
Your Contacts, Calendar, and Messages 30
Contacts 30
Calendar 32
Messaging 33
Your music 35
Transfer music 35
Play music 36
Troubleshooting 38
Tips and Tricks 41
Keyboard 41
Phone 41
Data 42
Typing 42
Browser 43
Navigation 43
General 43
Status indicators 44

Treo 750 1
Welcome to AT&T
Overview: Your Palm®Treo™ 750 smart device
Indicator light (visible
when your Treo 750 is
being charged)
Multi-connector
5-way navigator and
Center button
Earpiece
OK
Microphone
Headset jack
Start
Phone/Send
Side button
Power/End
Volume
Left action key
Right action key
Stylus
Ringer switch
Stylus
Infrared (IR) port (side)
Car kit jack

2Treo 750
Take advantage of fast broadband speeds
You must have a 3G SIM card in your Palm®Treo™ 750 smart device to take
advantage of fast broadband speeds. To determine if you have a 3G SIM
card, look for “3G” to the left of the gold connector on the back of the
card.
If you do not have a 3G SIM card, please visit your local AT&T retail store to
swap your existing SIM card for a 3G SIM card. There is no charge for
exchanging your SIM card for a 3G SIM card.
Tip
Your phone won’t
work without a SIM
card. The SIM card is
usually preinstalled
in your Treo 750,
unless you’re
upgrading from
another AT&T
phone. Check to
see if the SIM card is
installed. It’s
located in a cutout
in the lower-right
corner of the
battery
compartment. See
"I need to insert my
SIM card" on page
38 for more
information.
If you need a SIM
card, call AT&T
customer care at
1-800-331-0500.
Camera lens
(camera version
only)
Battery door
release
Speaker
Self-portrait mirror
Infrared (IR) port
Expansion card
(miniSD) slot
Reset button (located
behind expansion
card slot door)
Press battery door
release
Notch

Treo 750 3
Setup
Insert the battery
1. Remove the battery door.
2. Insert the battery into the compartment.
3. Slide the battery door back into place.
4. Connect the charger.
The touchscreen on your Palm®Treo™ 750 smart device turns on. Wait for
the progress bar to fill and the Windows Mobile®screen to appear.
Press battery
door release
Align battery
contacts with
Treo 750
contacts

4Treo 750
Complete setup
1. When prompted, tap anywhere on the
screen to begin setup.
2. Tap the onscreen targets to align the
touchscreen, and then press Next
(right action key).
3. On the network time screen, leave the
boxes checked if you want your Treo 750 to
obtain the date, time, and time zone from
the local network. Uncheck the boxes if you
want to enter this information manually.
Press Next (right action key).
4. Read about about four important
features of your Treo 750. Press Next
(right action key) to go to each screen.
5. After you complete setup, we
recommend that you review the first two
sections of the Quick Tour. Press Start ,
select Programs, and then select Quick
Tour .
Note: If your Treo 750 doesn’t turn on after you charge it, do a soft reset by
pressing the Reset button behind the expansion card slot door with the tip of the
stylus. For more information on resetting your Treo 750, see your Treo 750 User
Guide on the Windows Mobile Getting Started CD.
Tip
You need a high-
speed data plan for
email, multimedia
messaging, and
web browsing. Find
out if you have a
plan by checking
your bill or calling
AT&T: dial 611 from
your Treo 750 or
1-800-331-0500
from any phone.
Tip
Need help setting
up your Treo 750?
Call the Palm Setup
Help desk for AT&T
customers at
1-800-331-0500.

Treo 750 5
Navigation
Wake up the touchscreen and turn it off
The phone and the touchscreen of your Palm®Treo™ 750 smart device can
be turned off and on separately. When you wake up the touchscreen and
leave the phone off you can use only the organizer features—for example,
when you’re on a plane and want to look at your calendar, play MP3 files, or
write email offline.
If you’re taking your Treo 750 out of the box and turning it on for the first
time, the phone is already on. You just need to wake up the touchscreen.
1. Press and release Power/
End to wake up the
touchscreen.
2. Press Center to turn
off Keyguard.
3. Press and release Power/
End to turn off the
touchscreen and lock the
keyboard.
Tip
How can you tell if
your phone is on?
Look in the upper-
left corner of the
Today screen, just
under the Microsoft
logo. If you see
“AT&T,” you r phone
is on.
Power/End
Center

6Treo 750
Move around the touchscreen
To move around the touchscreen on your Treo 750, you can use the 5-way
navigator, or you can tap items on the screen with the stylus. The 5-way
includes the following buttons:
Highlight and select items
The highlight identifies which item is affected by your next action. Use
Left , Right , Up , and Down on the 5-way to move the highlight
from one item to another. The highlight can take two forms: a border
around an onscreen button, a check box, an option, or a web link; or light
text on a dark background.
Did You Know?
On most screens,
one item—a button,
a list entry, or a
check box—is
highlighted by
default.
Tip
If the item you want
doesn’t appear on
the touchscreen, try
tapping the
onscreen scroll
arrows to view
more information.
Up
Down
Left Right
Center

Treo 750 7
After highlighting an item, you can select (activate) it by pressing Center
or by tapping the item with the stylus.
Select menu items
Many applications have menus that give you access to additional features.
These menus are usually hidden from view, but they appear when you press
Menu (right action key).
1. Press Menu (right action key) to
display an application’s menu.
2. Press Up or Down to highlight a menu
item.
3. If an arrow appears next to a menu item,
press Center or Right to display
additional items on a submenu, and then press
Up or Down to highlight a submenu item.
To return to the main menu without making a
selection, press Left .
4. Press Center to select the highlighted menu item, or press Left or
Menu (right action key) to close the menu and cancel your selection.
Tip
You can select most
menu items by
pressing a key on
the keyboard. To
quickly access a
menu item, press
Menu (right action
key) followed by the
underlined letter in
the menu item’s
name.