Panasonic CS-HE9NKE User manual

F568747
QUICK GUIDE
QUICK GUIDE
SNABBGUIDE
SNABBGUIDE
HURTIGGUIDE
HURTIGGUIDE
PIKAOPAS
PIKAOPAS
KVIKVEJLEDNING
KVIKVEJLEDNING
Operating Instructions
Air Conditioner
Model No.
Indoor Unit Outdoor Unit
CS-HE9NKE CU-HE9NKE
CS-HE12NKE CU-HE12NKE
CS-AE9NKE CU-AE9NKE
© Panasonic Appliances Air-Conditioning Malaysia
Sdn. Bhd. 2012. Unauthorized copying and distribution
is a violation of law.
ENGLISH
Before operating the unit, read these operating
instructions thoroughly and keep them for future
reference.
SVENSKA
Innan du använder enheten, läs noga igenom
denna bruksanvisning och spara den för framtida
bruk.
NORSK
Les bruksanvisningen nøye før du bruker denne
enheten, og oppbevar den for fremtidig bruk.
SUOMI
Lue nämä käyttöohjeet huolellisesti ennen
yksikön käyttämistä ja säilytä ne tulevaisuutta
varten.
DANSK
Læs brugsanvisningen grundigt igennem før
du benytter anlægget og gem den til fremtidig
brug.
Jälleenmyyjäsi pääkaupunkiseudulla: Jäähdytinpalvelu RefGroup Oy, Kelatie 9 C, 01450 Vantaa, 050 - 433 2222
www.ILMALÄMPÖPUMPUT.com

2
ENGLISH Thank you for purchasing Panasonic Air Conditioner
TABLE OF CONTENTS
TABLE OF CONTENTS
OPERATION CONDITION
OPERATION CONDITION
Use this air conditioner under the following temperature range
Temperature (°C) Indoor Outdoor
*DBT *WBT *DBT *WBT
COOLING Max. 32 23 43 26
Min. 16 11 16 11
HEATING Max. 30 - 24 18
Min. 16 - -15 -
+8/10°C
HEAT Max. 10 - - -
Min. 8 - -15 -
* DBT: Dry bulb temperature * WBT: Wet bulb temperature
SAFETY PRECAUTIONS
4~5
REMOTE CONTROL
6~7
INDOOR UNIT
8
TROUBLESHOOTING
9
INFORMATION
10~11
QUICK GUIDE
BACK COVER
NOTE : The illustrations in this manual are for explanation purposes only and may differ from the actual unit. They are
subjected to change without notice for future improvement.
SVENSKA
Tack för att du har köpt Panasonic Värmepump
INNEHÅLLSFÖRTECKNING
INNEHÅLLSFÖRTECKNING
TILLÅTNA DRIFTSFÖRHÅLLANDEN
TILLÅTNA DRIFTSFÖRHÅLLANDEN
Värmepumpen får användas vid följande temperaturer
Temperatur (°C) Inomhus Utomhus
*DBT *WBT *DBT *WBT
KYLA Max. 32 23 43 26
Min. 16 11 16 11
VÄRME Max. 30 - 24 18
Min. 16 - -15 -
+8/10°C
HEAT Max. 10 - - -
Min. 8 - -15 -
* DBT: Torr temperatur * WBT: Våt temperatur
SÄKERHETSFÖRESKRIFTER
12~13
FJÄRRKONTROLL
14~15
INOMHUSDEL
16
PROBLEMLÖSNING
17
INFORMATION
18~19
SNABBGUIDE
BAKSIDAN
OBS : Bilderna i denna skötselanvisning är endast illustrativa och kan därför skilja sig från den faktiska modellen. Förändringar kan göras
utan föregående meddelande angående framtida förbättringar.
NORSK Takk for at du har kjøpt et klimaanlegg fra Panasonic
INNHOLDSFORTEGNELSE
INNHOLDSFORTEGNELSE
BRUKSBETINGELSER
BRUKSBETINGELSER
Bruk dette klimaanlegget innefor følgende temperaturområde
Temperatur (°C) Innendørs Utvendig
*DBT *WBT *DBT *WBT
KJØLING
Maks. 32 23 43 26
Min. 16 11 16 11
OPPVARMING
Maks. 30 - 24 18
Min. 16 - -15 -
+8/10°C
HEAT
Maks. 10 - - -
Min. 8 - -15 -
* DBT: Temperatur tørr kolbe * WBT: Temperatur fuktig kolbe
SIKKERHETSFORANSTALTNINGER
20~21
FJERNKONTROLL
22~23
INNVENDIG ENHET
24
FEILSØKING
25
INFORMASJON
26~27
HURTIGGUIDE
BAKSIDE
MERKNAD : Illustrasjonene i denne veiledningen er kun ment som eksempler, og kan variere i forhold til den reelle enheten.
Spesifikasjoner og utseende kan endres uten foregående varsel for fremtidige forbedringer.
Jälleenmyyjäsi pääkaupunkiseudulla: Jäähdytinpalvelu RefGroup Oy, Kelatie 9 C, 01450 Vantaa, 050 - 433 2222
www.ILMALÄMPÖPUMPUT.com

3
SUOMI Kiitos, että valitsit Panasonic ilmastointilaitteen
SISÄLLYSLUETTELO
SISÄLLYSLUETTELO
KÄYTTÖOLOSUHTEET
KÄYTTÖOLOSUHTEET
Käytä tätä ilmastointilaitetta seuraavissa lämpötiloissa
Lämpötila (°C) Sisällä Ulkona
*DBT *WBT *DBT *WBT
JÄÄHDYTYS Maks. 32 23 43 26
Min. 16 11 16 11
LÄMMITYS Maks. 30 - 24 18
Min. 16 - -15 -
+8/10°C
HEAT Maks. 10 - - -
Min. 8 - -15 -
* DBT: Kuiva lämpötila * WBT: Märkä lämpötila
TURVATOIMET
28~29
KAUKO-OHJAIN
30~31
SISÄYKSIKKÖ
32
VIANETSINTÄ
33
TIEDOT
34~35
PIKAOPAS
TAKAKANSI
HUOM. : Tämän käyttöohjeen kuvilla on vain selittävä tehtävä, ja ne voivat poiketa itse yksiköstä. Muutoksia voidaan tehdä ilman
ilmoitusta tulevasta parannuksesta.
DANSK Tak for dit valg af Panasonic Air Conditioner
INDHOLDSFORTEGNELSE
INDHOLDSFORTEGNELSE
DRIFTSBETINGELSER
DRIFTSBETINGELSER
Brug dette airconditionanlæg inden for følgende temperaturområder
Temperatur (°C) Indendørs Udendørs
*DBT *WBT *DBT *WBT
KØLING
Maks. 32 23 43 26
Min. 16 11 16 11
OPVARMNING
Maks. 30 - 24 18
Min. 16 - -15 -
+8/10°C
HEAT
Maks. 10 - - -
Min. 8 - -15 -
* DBT: Tørpæretemperatur * WBT: Vådpæretemperatur
SIKKERHEDSFORSKRIFTER
36~37
FJERNBETJENING
38~39
INDENDØRS ENHED
40
FEJLFINDING
41
OPLYSNINGER
42~43
KVIKVEJLEDNING
BAGOMSLAG
BEMÆRK : Illustrationerne i denne brugervejledning er udelukkende til orienteringsformål og kan afvige fra det aktuelle anlæg.
Der tages forbehold for ændringer uden varsel med henblik på forbedringer.
Jälleenmyyjäsi pääkaupunkiseudulla: Jäähdytinpalvelu RefGroup Oy, Kelatie 9 C, 01450 Vantaa, 050 - 433 2222
www.ILMALÄMPÖPUMPUT.com

4
SAFETY PRECAUTIONS
To prevent personal injury, injury to others, or property
damage, please comply with the following.
Incorrect operation due to failure to follow instructions below
may cause harm or damage, the seriousness of which is
classified as below:
WARNING
WARNING
This sign warns of death or serious injury.
CAUTION
CAUTION
This sign warns of injury or damage to property.
The instructions to be followed are classified by the following
symbols:
This symbol denotes an action that is PROHIBITED.
These symbols denote an actions that is
COMPULSORY.
WARNING
WARNING
INDOOR UNIT AND OUTDOOR UNIT
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have
been given supervision or instruction concerning
use of the appliance by a person responsible for
their safety. Children should be supervised to
ensure that they do not play with the appliance.
Please consult authorized dealer or specialist to
clean the internal parts, repair, install, remove
and reinstall the unit. Improper installation and
handling will cause leakage, electric shock or
fire.
Confirm to authorized dealer or specialist on
usage of specified refrigerant type. Using of
refrigerant other than the specified type may
cause product damage, burst and injury etc.
Do not install the unit in a potentially explosive
or flammable atmosphere. Failure to do so could
result in fire.
Do not insert your fingers or other
objects into the air conditioner indoor
or outdoor unit, rotating parts may
cause injury.
Do not touch the outdoor unit during lightning, it
may cause electric shock.
Do not expose yourself directly to cold air for a
long period to avoid excess cooling.
Do not sit or step on the unit, you may
fall down accidentally.
REMOTE CONTROL
Do not allow infants and small children to play
with the remote control to prevent them from
accidentally swallowing the batteries.
POWER SUPPLY
Do not use a modified cord,
joint cord, extension cord or
unspecified cord to prevent
overheating and fire.
To prevent overheating, fire or electric shock:
• Do not share the same power outlet with other
equipment.
• Do not operate with wet hands.
• Do not over bend the power supply cord.
• Do not operate or stop the unit by inserting or
pulling out the power plug.
Air Inlet
Air Inlet
Air Outlet
Air Outlet
Air Outlet
Air Outlet
Air Inlet
Air Inlet
Remote
Control
Power
Supply
Indoor
Unit
Outdoor
Unit
Jälleenmyyjäsi pääkaupunkiseudulla: Jäähdytinpalvelu RefGroup Oy, Kelatie 9 C, 01450 Vantaa, 050 - 433 2222
www.ILMALÄMPÖPUMPUT.com

ENGLISH
5
CAUTION
CAUTION
INDOOR UNIT AND OUTDOOR UNIT
Do not wash the indoor unit with water, benzene,
thinner or scouring powder to avoid damage or
corrosion at the unit.
Do not use for preservation of precise
equipment, food, animals, plants, artwork
or other objects. This may cause quality
deterioration, etc.
Do not use any combustible equipment in front of
the airflow outlet to avoid fire propagation.
Do not expose plants or pet directly to airflow to
avoid injury, etc.
Do not touch the sharp aluminium fin,
sharp parts may cause injury.
Do not switch ON the indoor unit when waxing
the floor. After waxing, aerate the room properly
before operating the unit.
Do not install the unit in oily and smoky areas to
prevent damage to the unit.
Do not dismantle the unit for cleaning purpose to
avoid injury.
Do not step onto an unstable bench when
cleaning the unit to avoid injury.
Do not place a vase or water container on the
unit. Water may enter the unit and degrade the
insulation. This may cause an electric shock.
Do not open window or door for long time during
COOL/DRY mode operation.
Ensure drainage pipe is connected properly and
keep drainage outlet clear of gutters, containers
or does not immersed in water to prevent water
leakage.
After a long period of use or use with any
combustible equipment, aerate the room
regularly.
After a long period of use, make sure the
installation rack does not deteriorate to prevent
the unit from falling down.
REMOTE CONTROL
Do not use rechargeable (Ni-Cd) batteries.
It may damage the remote control.
To prevent malfunction or damage of the remote
control:
• Remove the batteries if the unit is not going to
be used for a long period of time.
• New batteries of the same type must be
inserted following the polarity stated.
POWER SUPPLY
Do not pull the cord to disconnect the plug to
prevent electric shock.
WARNING
WARNING
POWER SUPPLY
If the supply cord is damage, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
It is strongly recommended to be installed
with Earth Leakage Circuit Breaker (ELCB)
or Residual Current Device (RCD) to prevent
electric shock or fire.
To prevent overheating, fire or electric shock:
• Insert the power plug properly.
• Dust on the power plug should be periodically
wiped with a dry cloth.
Stop using the product if any abnormality/failure
occurs and disconnect the power plug or turn off
the power switch and breaker.
(Risk of smoke/fire/electric shock)
Examples of abnormality/failure
• The ELCB trips frequently.
• Burning smell is observed.
• Abnormal noise or vibration of the unit is
observed.
• Water leaks from the indoor unit.
• Power cord or plug becomes abnormally hot.
• Fan speed cannot be controlled.
• The unit stops running immediately even if it is
switched on for operation.
• The fan does not stop even if the operation is
stopped.
Contact your local dealer immediately for
maintenance/repair.
This equipment must be earthed to prevent
electrical shock or fire.
Prevent electric shock by switching off the power
supply and unplug when:
- Before cleaning or servicing.
- Extended non-use.
- Abnormally strong lightning activity.
Jälleenmyyjäsi pääkaupunkiseudulla: Jäähdytinpalvelu RefGroup Oy, Kelatie 9 C, 01450 Vantaa, 050 - 433 2222
www.ILMALÄMPÖPUMPUT.com

6
REMOTE CONTROL
3TO SELECT OPERATION MODE
HEAT mode - To enjoy warm air
• Unit takes a while to warm up. The power indicator blinks
during this operation.
• Unit may stops warm air supply for deice. The deice
indicator ON during this operation.
COOL mode - To enjoy cool air
• Use curtains to screen off sunlight and outdoor heat to
reduce power consumption during cool mode.
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling
operation.
FAN mode - To circulate air in the room
AUTO mode - For your convenience
•
During operation mode selection the power indicator blinks.
• Unit selects operation mode every 10 minutes according
to temperature setting and room temperature.
4TO SELECT FAN SPEED (5 OPTIONS)
FAN
S
PEED
• For AUTO, the indoor fan speed is automatically adjusted
according to the operation mode.
5TO ADJUST AIRFLOW DIRECTION (5 OPTIONS)
AIR SWING
• Keeps the room ventilated.
• In COOL/DRY mode, if AUTO is set, the louver swing
left/right and up/down automatically.
• In HEAT mode, if AUTO is set, the horizontal louver fix at
predetermined position. The vertical louver swing left/right
after the temperature rises.
6TO PURIFY THE AIR
NANOE-G
• Removes/deactivates harmful micro-organisms such as
viruses, bacteria, etc.
• Can be activated even when the unit is turned off. In this
condition, fan speed and air swing cannot be adjusted.
• nanoe-G starts automatically with the unit switched on
with
OFF/ON
.
MODE
POWERFUL/
QUIET
TEMP
OFF/ON
TIMER
SET
CANCEL
ON
OFF
123
AIR SWING
FAN SPEED
+8/10°C
HEAT
SET CHECK CLOCK RESET
AC RC
FAN
FAN
SPEED
AIR
SWING
AUTO
+8/10°C
HEAT
HEAT
COOL
DRY
ECONAVI
NANOE-G
6
2
5
Remote
Control display
4
3
9
8
7
10
11
12
13
1
Maximum distance: 8m
(Green/
Blue) (Orange) (Green) (Green)(Blue) (Orange) (Orange)
TIMER +8/10°C HEAT NANOE-G POWERFUL QUIET
POWER/
DEICE
Indicator
Sunlight Sensor and Remote
Control Receiver
Press the remote control’s button
1TO TURN ON OR OFF THE UNIT
POWER/
DEICE
• Please be aware of the OFF indication on the remote control
display to prevent the unit from starting/stopping improperly.
2TO SET TEMPERATURE
• Selection range: 16°C ~ 30°C (Not applicable for FAN
mode).
• Operating the unit within the recommended temperature
could induce energy saving.
HEAT mode : 20°C ~ 24°C.
COOL mode : 26°C ~ 28°C.
DRY mode : 1°C ~ 2°C lower than room temperature.
Jälleenmyyjäsi pääkaupunkiseudulla: Jäähdytinpalvelu RefGroup Oy, Kelatie 9 C, 01450 Vantaa, 050 - 433 2222
www.ILMALÄMPÖPUMPUT.com

ENGLISH
7
10˚C
8˚C
TO SET THE TIMER
TO SET THE TIMER
• 2 sets of ON and OFF timers are available to turn ON
or OFF the unit at different preset time.
• Complete below procedures to set each timer:
ON
OFF
1
Cancel
Cancel 2
TIMER
S
ET
Select ON or OFF timer Set the
time Confirm
• Example of application at living room:
Morning: ON at 07:00 (Wake up)
OFF at 08:00 (Out for work)
Evening: ON at 17:00 (Back home)
OFF at 22:00 (Sleep)
• To cancel ON or OFF timer, press
O
Nor OFF to
select respective or then press CANCEL.
• If timer is cancelled manually or due to power failure,
you can restore the timer again by pressing
O
Nor
OFF to select respective or then press SET .
• Upcoming timer will be displayed and will be activated
in sequence.
• When ON Timer is set, the unit may start earlier (up
to 35 minutes) before the actual set time in order to
achieve the desired temperature on time.
• Timer operation is based on the clock set in the
remote control and repeats daily once set. For clock
setting, please refer to Remote Control Preparation
on the back cover.
NOTES
NOTES
NANOE
-
G
,
POWERFUL/
QUIET
,
E
CO
NAV
I
POWERFUL/
QUIET
,
E
CO
NAV
I
,
+8/10°C
HEAT
• Can be activated in all modes and can be cancelled by
pressing the respective button again. • Cannot be selected at the same time.
•
+8/10°C
HEAT
operation can be activated independently.
7TO USE MAINTENANCE
HEATING
+8/10°C HEAT
• Maintain indoor temperature at 8/10°C. Fan switches to
high fan speed automatically.
• This operation overwrite the operation mode and could be
cancelled by pressing .
• Defrost operation at outdoor unit will
result in sudden cold air from indoor unit.
Eliminate cold air with heat mode.
8TO SWITCH BETWEEN POWERFUL & QUIET
POWERFUL/
QUIET
QUIETPOWERFUL NORMAL
P
O
WERF
U
L
TO REACH TEMPERATURE
QUICKLY
POWERFUL
This operation stops automatically after 20
minutes.
Q
UIET
TO ENJOY QUIET
OPERATION
QUIET
• This operation reduces airflow noises.
9TO OPTIMIZE ENERGY SAVING
• During ECONAVI operation, the sunlight sensor
detects sunlight intensity coming through windows and
differentiates between sunny and cloudy/night to further
optimize energy saving by adjusting the temperature.
Ambient condition SunnyCloudy/
Night
SunnyCloudy/
Night
COOL/DRY Mode
Set Temperature
HEAT Mode
Set Temperature -1°C -1°C
+1°C
ECONAVI is activated while it is cloudy / night
ECONAVI is activated while it is sunny
• In a room without window or with thick curtain, the
sunlight sensor will judge as cloudy/night.
10 Press and hold for 5 seconds to dim or restore the
unit’s indicator brightness.
11 Press and hold for approximately 10 seconds to
show temperature setting in °C or °F.
12 Press to restore the remote control’s default setting.
13 Not used in normal operations.
Jälleenmyyjäsi pääkaupunkiseudulla: Jäähdytinpalvelu RefGroup Oy, Kelatie 9 C, 01450 Vantaa, 050 - 433 2222
www.ILMALÄMPÖPUMPUT.com

8
INDOOR UNIT
CAUTION
•Switch off the power supply and unplug before cleaning.
•Do not touch the aluminium fin, sharp parts may cause injury.
CLEANING INSTRUCTIONS
CLEANING INSTRUCTIONS
HINT
HINT
• Do not use benzene, thinner or scouring powder.
• Use only soap ( pH7) or neutral household detergent.
• Do not use water hotter than 40°C.
• To ensure optimal performance of the unit, cleaning
maintenance has to be carried out at regular intervals.
Dirty unit may cause malfunction and you may see error
code “H99”. Please consult authorized dealer.
1INDOOR UNIT
• Wipe the unit gently with a soft, dry cloth.
2FRONT PANEL
Remove Front Panel
• Raise and pull to remove the front panel.
• Wash gently and dry.
Close Front Panel
• Press down both ends of the front panel to close it
securely.
3SUNLIGHT SENSOR AND REMOTE CONTROL
RECEIVER
4ALUMINIUM FIN
5HORIZONTAL AIRFLOW DIRECTION LOUVER
• Do not adjust by hand.
6VERTICAL AIRFLOW DIRECTION LOUVER
• Do not adjust by hand.
7AUTO OFF/ON BUTTON
• Use when remote control is misplaced or a malfunction
occurs.
Action Mode
Press once. Auto
Press and hold until 1 beep is heard,
then release. Cooling
Press and hold until 1 beep is heard,
then release.
Press again until 2 beeps, then release. Heating
Press the button to turn off.
8AIR FILTERS
• Air filter cleaning is required every two weeks.
• Wash/rinse the filters gently with water to avoid damage
to the filter surface.
• Dry the filters thoroughly under shade, away from fire or
direct sunlight.
• Replace any damaged filters.
9nanoe-G GENERATOR
Clean with dry cotton bud.
•nanoe-G generator cleaning is
recommended every 6 months.
27
1
5
8
4
6
3
9nanoe-G GENERATOR
• Do not touch during operation.
Jälleenmyyjäsi pääkaupunkiseudulla: Jäähdytinpalvelu RefGroup Oy, Kelatie 9 C, 01450 Vantaa, 050 - 433 2222
www.ILMALÄMPÖPUMPUT.com

ENGLISH
9
TROUBLESHOOTING
The following symptoms do not indicate malfunction.
The following symptoms do not indicate malfunction.
SYMPTOM
SYMPTOM
CAUSE
CAUSE
Mist emerges from indoor unit. ►• Condensation effect due to cooling process.
Water flowing sound during operation. ►• Refrigerant flow inside the unit.
The room has a peculiar odor. ►• This may be due to damp smell emitted by the wall,
carpet, furniture or clothing.
Indoor fan stops occasionally during automatic fan speed
setting.
►• This helps to remove the surrounding odours.
Airflow continues even after operation has stopped. ►• Extraction of remaining heat from the indoor unit
(maximum 30 seconds).
Operation is delayed a few minutes after restarting. ►• The delay is a protection to the unit’s compressor.
Outdoor unit emits water/steam. ►• Condensation or evaporation occurs on pipes.
TIMER indicator is always on. ►• The timer setting repeats daily once set.
During deice operation, louver is closed. ►• The AIR SWING is set to AUTO.
Indoor fan stops occasionally during heating operation. ►• To avoid unintended cooling effect.
POWER indicator blinks before the unit is switched on. ►• This is a preliminary step in preparation for the operation
when the ON timer has been set.
Cracking sound during operation. ►• Changes of temperature caused the expansion/
contraction of the unit.
Check the following before calling for servicing.
Check the following before calling for servicing.
SYMPTOM
SYMPTOM
CHECK
CHECK
Heating/Cooling operation is not working efficiently. ►• Set the temperature correctly.
• Close all doors and windows.
• Clean or replace the filters.
• Clear any obstruction at the air inlet and air outlet vents.
Noisy during operation. ►• Check if the unit has been installed at an incline.
• Close the front panel properly.
Remote control does not work.
(Display is dim or transmission signal is weak.)
►• Insert the batteries correctly.
• Replace weak batteries.
The unit does not work. ►• Check if the circuit breaker is tripped.
• Check if timers have been set.
The unit does not receive the signal from the remote
control.
►• Make sure the receiver is not obstructed.
• Certain fluorescent lights may interfere with signal
transmitter. Please consult authorized dealer.
The unit stops and the TIMER indicator blinks.
Use remote control to retrieve error code.
TIMER
SET
CANCEL
ON
OFF
123
SET CHECK CLOCK RESET
AC RC
1Press for 5
seconds.
3Press for 5
seconds to
quit checking.
2Press until you hear
beep sound, then
write down the error
code.
Note:
• For certain errors, you
may restart the unit for
limited operation with 4
beeps when operation
starts.
4Turn the unit off and reveal the error code to authorized dealer.
Jälleenmyyjäsi pääkaupunkiseudulla: Jäähdytinpalvelu RefGroup Oy, Kelatie 9 C, 01450 Vantaa, 050 - 433 2222
www.ILMALÄMPÖPUMPUT.com

10
INFORMATION
FOR SEASONAL INSPECTION AFTER EXTENDED
NON-USE
• Checking of remote control batteries.
• No obstruction at air inlet and air outlet vents.
• Use Auto OFF/ON button to select Cooling/Heating
operation. After 15 minutes of operation, it is normal to
have the following temperature difference between air
inlet and air outlet vents:
Cooling: ≥8°C Heating: ≥14°C
FOR EXTENDED NON-USE
• Activate Heat mode for 2~3 hours as an alternative to
remove moisture left in the internal parts thoroughly to
prevent mould growth.
• Turn off the power supply and unplug.
• Remove the remote control batteries.
NON SERVICEABLE CRITERIAS
TURN OFF POWER SUPPLY AND UNPLUG then
please consult authorized dealer under the following
conditions:
• Abnormal noise during operation.
• Water/foreign particles have entered the remote
control.
• Water leaks from Indoor unit.
• Circuit breaker switches off frequently.
• Power cord becomes unnaturally warm.
• Switches or buttons are not functioning properly.
Jälleenmyyjäsi pääkaupunkiseudulla: Jäähdytinpalvelu RefGroup Oy, Kelatie 9 C, 01450 Vantaa, 050 - 433 2222
www.ILMALÄMPÖPUMPUT.com