Panasonic CS-KS30NKU Operating manual

AIRCO
N
DITIONER
IMPORTANT
These air conditioners employ new
refrigerant R410A.
Pay special attention when
servicing the unit.
TECHNICAL & SERVICE MANUAL
CS-KS30NKU + CU-KS30NKUA
CS-KS36NKU + CU-KS36NKUA
DC INVERTER SPLIT SYSTEM AIR CONDITIONER
Outdoor Model No.
CU-KS30NKUA
CU-KS36NKUA
Product Code No.
1 852 360 84
1 852 360 85
Indoor Unit Outdoor Unit
CS-KS30NKU
CS-KS36NKU
CU-KS30NKUA
CU-KS36NKUA
Indoor Model No.
CS-KS30NKU
CS-KS36NKU
Product Code No.
1 852 360 86
1 852 360 87
REFERENCE NO. SM700875

• Before doing repair work, please read the " SAFETY PRECAUTIONS" carefully and fully understand them.
• The precautionary items here are divided into " Warning" and " Caution" items.
Items in particular which may cause death or serious injury to the service personnel if the work is not performed correctly,
are included in the " Warning" table.
However, even precautionary items identified as " Caution" also have the potential for serious consequences
if not performed correctly.
Important safety precautions are described for all items in both categories. Be sure to carefully follow all of them.
• Symbol Indication
: This symbol indicates items to which we need to pay attention.
In this triangle, a definite precautionary item is described.
: This symbol indicates the item to be prohibited.
In or close to this circle, a prohibited item is described.
: This symbol indicates the items requiring special attention or instruction.
In or close to this circle, a prohibited item is described.
• After doing repair work, perform a test run to confirm that there are no abnormalities.
At the same time, explain the precautions in use to the user.
SAFETY PRECAUTIONS
Warning
Before performing an overhaul, disconnect the power plug or power cable from the unit.
Performing the work with the power supplied to the unit, may cause an electric shock.
When repair work or circuit inspection that requires power supply for the air conditioner, is to be performed,
do not touch the charging section.
Doing so may cause an electric shock.
For the step-up capacitor attached to the electric section, perform the repair work after sufficiently discharging it.
Insufficient capacitor discharge may cause an electric shock.
Do not perform repair work on the electric sections with wet hands.
Doing so may cause an electric shock.
Do not start or stop the air conditioner by means of connecting or disconnecting the power plug.
Doing so may cause an electric shock or fire.
When conducting repair work only use components included in the parts list for the corresponding unit and perform
the work with the appropriate tools.
Incorrect or poor repair work may cause an electric shock or fire.
Never modify the unit.
Doing so may cause an electric shock or fire.
Perform all electric work according to local applicable regulations related to electrical equipment or interior wiring
regulation and make sure to use the exclusive circuit.
Insufficient capacity to the electric circuit or defective arrangement results may cause an electric shock or fire.
Make sure to replace any power cable or lead wire showing any signs of scratch or deterioration.
Failure to do so may cause an electric shock, overheating or fire.
Make sure that there is no dust on or slack in the power plug and insert fully into the socket.
Dust or incomplete connections may cause an electric shock or fire.
Do not damage or process the power cord, as it may cause an electric shock or fire.
For the wiring between the indoor unit and outdoor unit, securely fix the specified cable onto the terminal plate.
Poorly fixed wiring may cause a heat or fire.
After connecting the wiring between the indoor unit and outdoor unit, attach the terminal cover securely.
Incomplete attachment of the terminal cover may cause overheating or fire.
Prohibit
Prohibit
Prohibit
Prohibit
Prohibit
2

Warning
If refrigerant gas blows off during the work, do not touch the refrigerant gas as it may cause frostbite.
If refrigerant gas leaks during the work, ventilate the room.
If refrigerant gas catches fire, harmful gas may be generated.
Do not mix any gas other than the specified refrigerant gas in the refrigerating cycle.
If air or other contaminants mix with the gas, pressure will become extremely high in the refrigerating cycle,
which may cause a unit breakdown."
When the welded section of the compressor intake or discharge pipe is to be disconnected, perform it in
a well-ventilated place after sufficiently recovering the refrigerant gas.
Any residue gas may jet out refrigerant or refrigerating machine oil, which may cause an injury.
When the work is to be performed in a high place (About 2 meters or more), make sure to wear a safety helmet,
gloves and safety belt. Insufficient safety gear may cause a serious injury in case of a fall.
When the unit is to be relocated, confirm that the new installation location has sufficient strength for the weight of the unit.
Insufficient strength of the installation location and incomplete installation work may cause an injury due to
the unit falling.
When the remote controller batteries are replaced, dispose of the old batteries out of the reach of children.
If a child swallows a battery, make sure that the child gets immediate medical attention.
Caution
Do not wash the air conditioner with water, as this may cause an electric shock or fire.
For the repair work in places with high humidity or moisture, make sure to ground the unit.
Failure to do so may cause an electric shock.
Confirm that the component attachment position, wiring condition, soldering condition and connector connection
are normal.
If not, it may cause overheating or fire.
Confirm that the temperature around the compressor is not too high, and then perform the repair work.
Failure to do so may cause a burn.
Perform welding work in a place with good ventilation.
If the work is performed in a poorly ventilated area, it might cause a lack of oxygen.
If the installation plate or attachment frame has deteriorated due to corrosion, etc., replace it.
Failure to do so may cause an injury due to the unit falling.
When the cleaning is to be performed, make sure to turn off the power and pull out the plug.
Touching the fan that is rotating at high speed may result in an injury.
When the indoor unit is to be removed, do not place it on an incline.
Doing so may cause wet furniture because water left inside may trickle down.
Do not hold the sharp end of the unit or the aluminum fins, as it may cause an injury to your hand or finger.
After repairs, make sure to measure the insulation resistance and confirm that the value is 1 Mohm or more.
Any insulation error may cause an electric shock.
After repairs, make sure to check the drainage of the indoor unit.
Inappropriate drainage may cause wet furniture and floors due to water leakage.
Prohibit
Prohibit
Prohibit
Prohibit
Prohibit
3

Table of Contents
SAFETY PRECAUTIONS
TABLE OF CONTENTS
1. OPERATING RANGE
2. SPECIFICATIONS
2-1. Unit Specifications
2-2. Major Component Specifications
2-3. Other Component Specifications
3. DIMENSIONAL DATA
4. REFRIGERANT FLOW DIAGRAM
4-1. Refrigerant Flow Diagram
5. PERFORMANCE DATA
5-1. Temperature Charts
5-2. Cooling Capacity
5-3. Cooling Capacity (Low Ambient)
5-4. Air Throw Distance Charts
6. ELECTRICAL DATA
6-1. Electrical Characteristics
6-2. Electric Wiring Diagrams
7. FUNCTIONS
7-1. Operation Functions
7-2. Protective Functions
8. TROUBLESHOOTING (BEFORE CALLING FOR SERVICE)
8-1. Precautions before Performing Inspection or Repair
8-2. Method of Self-Diagnostics
8-3. Checking the Indoor and Outdoor Units
8-4. Trouble Diagnosis of Fan Motor
8-5. Noise Malfunction and Electromagnetic Interference
2
4
6
7
11
15
16
18
19
21
23
25
27
29
31
35
36
36
39
43
45
..............................................................................................................
.....................................................................................................................
...................................................................................................................
.............................................................................................................
.......................................................................................
.......................................................................................
.....................................................................................................................
...................................................................................................
............................................................................................................
................................................................................................................
........................................................................................
.................................................................................................
....................................................................................................
....................................................................................................
...........................................................................................................
...........................................................................................................
...........................................................
.................................................................................................
..............................................................................
...........................................................................................
..........................................................
Page
4

9. CHECKING ELECTRICAL COMPONENTS
9-1. Measurement of Insulation Resistance
9-2. Checking Continuity of Fuse on PCB Ass'y
10. REFRIGERANT R410A:
SPECIAL PRECAUTIONS WHEN SERVICING UNIT
10-1. Characteristics of New Refrigerant R410A
10-2. Checklist before Servicing
10-3. Tools Specifically for R410A
10-4. Tubing Installation Procedures
10-5. In Case of Compressor Malfunction
10-6. In Case Refrigerant is Leaking
10-7. Charging Additional Refrigerant
10-8. Retro-Fitting Existing Systems
APPENDIX A Operating Instructions
APPENDIX B INSTALLAION INSTRUCTIONS
46
47
48
49
50
50
51
53
54
54
A-1
A-2
...............................................................................
.........................................................................
.........................................................................
...................................................................................................
................................................................................................
............................................................................................
....................................................................................
............................................................................................
..........................................................................................
............................................................................................
............................................................................................
...............................................................................
Page
5

95 °F DB / 71 °F WB
67 °F DB / 57 °F WB
1. OPERATING RANGE
Maximum
Minimum
115 °F DB
0 °F DB
Temperature Indoor Air Intake Temp. Outdoor Air Intake Temp.
Cooling
6

2. SPECIFICATIONS
2-1. Unit Specifications
Indoor Unit CS-KS30NKU
Outdoor Unit CU-KS30NKUA < 230V >
DATA SUBJECT TO CHANGE WITHOUT NOTICE.
Remarks: Rating conditions are:
Cooling: Indoor air temperature 80 °F DB / 67 °F WB
Outdoor air temperature 95 °F DB / 75 °F WB
Vertical
dB-A
dB-A
Indoor : Hi/Me/Lo/Qt*
Outdoor : Hi
Air Filter
Compressor
Refrigerant / Amount charged at shipment Ibs (g)
Refrigerant Control
16.5
3,290
( 5.0 to 16.5 )
( 1,000 to 3,290 )
30,600
9.0
( 10,900 to 30,600 )
( 3.2 to 9.0 )
Shipping Volume
Cooling
18,600
12,000
Net
Shipping
Package Dimensions
Weight
Height sWidth sDepth
Height sWidth sDepth
Ibs (kg)
Ibs (kg)
cu.ft (m3)
(mm)
inch
(mm)
230V Single-Phase 60Hz
inch
187 to 253
Dimensions & Weight
(*Qt = Quiet mode)
Refrigerant Tubing Connections
Unit Dimensions
Operation Sound
Electrical Rating
Sensible Capacity
Latent Capacity
WPower Input
V
A
Available Voltage Range
Running Amperes
Refrigerant Tube Kit
Narrow tube
Wide tube
Refrigerant inch (mm)
Tube Diameter inch (mm)
32.0
39.7
4.59
(14.5)
(18.0)
(0.13)
183.0
205.0
15.88
(83.0)
(93.0)
(0.45)
42-3/8 s40 s16-3/8
(1,076 s1,016 s416)
(300 s1,065 s230) (910 s940 s340)
12-7/32 s44-7/8 s14-31/32
(310 s1,140 s380)
Outdoor UnitIndoor Unit
11-13/16 s41-15/16 s9-1/16 35-13/16 s37-1/32 s13-3/8
3/8 (9.52)
5/8 (15.88)
ft (m)Max. allowable tubing length at shipment
Flare Type
164 (50)
49 / 44 / 39 / 32
55
R410A / 6.5 (2,950)
Electric Expansion Valve
Washable, Anti-Mold
DC Twin Rotary (Inverter)
Manual
Auto
Timer
Indoor / OutdoorFan Speeds
24-Hour ON or OFF Timer, 1-Hour OFF Timer
Auto and 3 steps / Auto (Hi, Me, Lo)
Airflow Direction (Indoor) Horizontal
Controls / Temperature Control
Control Unit
Microprocessor / I.C. Thermister
Wireless Remote Control Unit
Features
Compressor Locked Rotor Amperes
Optional
BTU/h
Performance
%Power Factor 87
A 31.0
Voltage Rating
BTU/h
kW
Total Capacity
BTU/h
SEER BTU/Wh 16.0
630 (1,070) / 530 (901) /412 (700)Air Circulation (Hi/Me/Lo) ft3/min (m3/h)
9.57Moisture Removal (High) Pints/h
EER BTU/h/W 9.30
Fuse or Circuit Breaker Capacity A 35
7

Indoor Unit CS-KS30NKU
Outdoor Unit CU-KS30NKUA < 208V >
DATA SUBJECT TO CHANGE WITHOUT NOTICE.
Vertical
dB-A
dB-A
Indoor : Hi/Me/Lo/Qt*
Outdoor : Hi
Air Filter
Compressor
Refrigerant / Amount charged at shipment Ibs (g)
Refrigerant Control
Shipping Volume
Net
Shipping
Package Dimensions
Weight
Height sWidth sDepth
Height sWidth sDepth
Ibs (kg)
Ibs (kg)
cu.ft (m3)
(mm)
inch
(mm)
208V Single-Phase 60Hz
inch
Dimensions & Weight
(*Qt = Quiet mode)
Refrigerant Tubing Connections
Unit Dimensions
Operation Sound
Electrical Rating
Sensible Capacity
Latent Capacity
WPower Input
V
A
Available Voltage Range
Running Amperes
Refrigerant Tube Kit
Narrow tube
Wide tube
Refrigerant inch (mm)
Tube Diameter inch (mm)
ft (m)Max. allowable tubing length at shipment
Timer
Indoor / OutdoorFan Speeds
Airflow Direction (Indoor) Horizontal
Controls / Temperature Control
Control Unit
Features
Compressor Locked Rotor Amperes
BTU/h
Performance
%Power Factor
A
Voltage Rating
BTU/h
kW
Total Capacity
BTU/h
SEER BTU/Wh
Air Circulation (Hi/Me/Lo) ft3/min (m3/h)
Moisture Removal (High) Pints/h
EER BTU/h/W
Fuse or Circuit Breaker Capacity A
18.0
3,290
( 5.0 to 18.0 )
( 1,000 to 3,290 )
30,600
9.0
( 10,900 to 30,600 )
( 3.2 to 9.0 )
Cooling
18,600
12,000
187 to 253
32.0
39.7
4.59
(14.5)
(18.0)
(0.13)
183.0
205.0
15.88
(83.0)
(93.0)
(0.45)
(300 s1,065 s230) (910 s940 s340)
Outdoor UnitIndoor Unit
11-13/16 s41-15/16 s9-1/16 35-13/16 s37-1/32 s13-3/8
3/8 (9.52)
5/8 (15.88)
Flare Type
164 (50)
49 / 44 / 39 / 32
55
R410A / 6.5 (2,950)
Electric Expansion Valve
Washable, Anti-Mold
DC Twin Rotary (Inverter)
Manual
Auto
24-Hour ON or OFF Timer, 1-Hour OFF Timer
Auto and 3 steps / Auto (Hi, Me, Lo)
Microprocessor / I.C. Thermister
Wireless Remote Control Unit
Optional
88
31.0
16.0
630 (1,070) / 530 (901) /412 (700)
9.57
9.30
35
42-3/8 s40 s16-3/8
(1,076 s1,016 s416)
12-7/32 s44-7/8 s14-31/32
(310 s1,140 s380)
Remarks: Rating conditions are:
Cooling: Indoor air temperature 80 °F DB / 67 °F WB
Outdoor air temperature 95 °F DB / 75 °F WB
8

Indoor Unit CS-KS36NKU
Outdoor Unit CU-KS36NKUA < 230V >
DATA SUBJECT TO CHANGE WITHOUT NOTICE.
Vertical
dB-A
dB-A
Indoor : Hi/Me/Lo/Qt*
Outdoor : Hi
Air Filter
Compressor
Refrigerant / Amount charged at shipment Ibs (g)
Refrigerant Control
Shipping Volume
Net
Shipping
Package Dimensions
Weight
Height sWidth sDepth
Height sWidth sDepth
Ibs (kg)
Ibs (kg)
cu.ft (m3)
(mm)
inch
(mm)
230V Single-Phase 60Hz
inch
Dimensions & Weight
(*Qt = Quiet mode)
Refrigerant Tubing Connections
Unit Dimensions
Operation Sound
Electrical Rating
Sensible Capacity
Latent Capacity
WPower Input
V
A
Available Voltage Range
Running Amperes
Refrigerant Tube Kit
Narrow tube
Wide tube
Refrigerant inch (mm)
Tube Diameter inch (mm)
ft (m)Max. allowable tubing length at shipment
Timer
Indoor / OutdoorFan Speeds
Airflow Direction (Indoor) Horizontal
Controls / Temperature Control
Control Unit
Features
Compressor Locked Rotor Amperes
BTU/h
Performance
%Power Factor
A
Voltage Rating
BTU/h
kW
Total Capacity
BTU/h
SEER BTU/Wh
Air Circulation (Hi/Me/Lo) ft3/min (m3/h)
Moisture Removal (High) Pints/h
EER BTU/h/W
Fuse or Circuit Breaker Capacity A
20.0
4,000
( 5.0 to 20.0 )
( 1,000 to 4,000 )
34,000
10.0
( 10,900 to 34,000 )
( 3.2 to 10.0 )
Cooling
20,700
13,300
187 to 253
32.0
39.7
4.59
(14.5)
(18.0)
(0.13)
183.0
205.0
15.88
(83.0)
(93.0)
(0.45)
(300 s1,065 s230) (910 s940 s340)
Outdoor UnitIndoor Unit
11-13/16 s41-15/16 s9-1/16 35-13/16 s37-1/32 s13-3/8
3/8 (9.52)
5/8 (15.88)
Flare Type
164 (50)
49 / 44 / 39 / 32
55
R410A / 6.5 (2,950)
Electric Expansion Valve
Washable, Anti-Mold
DC Twin Rotary (Inverter)
Manual
Auto
24-Hour ON or OFF Timer, 1-Hour OFF Timer
Auto and 3 steps / Auto (Hi, Me, Lo)
Microprocessor / I.C. Thermister
Wireless Remote Control Unit
Optional
87
31.0
16.0
630 (1,070) / 530 (901) /412 (700)
10.64
8.50
45
42-3/8 s40 s16-3/8
(1,076 s1,016 s416)
12-7/32 s44-7/8 s14-31/32
(310 s1,140 s380)
Remarks: Rating conditions are:
Cooling: Indoor air temperature 80 °F DB / 67 °F WB
Outdoor air temperature 95 °F DB / 75 °F WB
9

Indoor Unit CS-KS36NKU
Outdoor Unit CU-KS36NKUA < 208V >
DATA SUBJECT TO CHANGE WITHOUT NOTICE.
Vertical
dB-A
dB-A
Indoor : Hi/Me/Lo/Qt*
Outdoor : Hi
Air Filter
Compressor
Refrigerant / Amount charged at shipment Ibs (g)
Refrigerant Control
Shipping Volume
Cooling
Net
Shipping
Package Dimensions
Weight
Height sWidth sDepth
Height sWidth sDepth
Ibs (kg)
Ibs (kg)
cu.ft (m3)
(mm)
inch
(mm)
208V Single-Phase 60Hz
inch
Dimensions & Weight
(*Qt = Quiet mode)
Refrigerant Tubing Connections
Unit Dimensions
Operation Sound
Electrical Rating
Sensible Capacity
Latent Capacity
WPower Input
V
A
Available Voltage Range
Running Amperes
Refrigerant Tube Kit
Narrow tube
Wide tube
Refrigerant inch (mm)
Tube Diameter inch (mm)
ft (m)Max. allowable tubing length at shipment
Timer
Indoor / OutdoorFan Speeds
Airflow Direction (Indoor) Horizontal
Controls / Temperature Control
Control Unit
Features
Compressor Locked Rotor Amperes
BTU/h
Performance
%Power Factor
A
Voltage Rating
BTU/h
kW
Total Capacity
BTU/h
SEER BTU/Wh
Air Circulation (Hi/Me/Lo) ft3/min (m3/h)
Moisture Removal (High) Pints/h
EER BTU/h/W
Fuse or Circuit Breaker Capacity A
21.9
4,000
( 5.0 to 21.9 )
( 1,000 to 4,000 )
34,000
10.0
( 10,900 to 34,000 )
( 3.2 to 10.0 )
20,700
13,300
187 to 253
32.0
39.7
4.59
(14.5)
(18.0)
(0.13)
183.0
205.0
15.88
(83.0)
(93.0)
(0.45)
(300 s1,065 s230) (910 s940 s340)
Outdoor UnitIndoor Unit
11-13/16 s41-15/16 s9-1/16 35-13/16 s37-1/32 s13-3/8
3/8 (9.52)
5/8 (15.88)
Flare Type
164 (50)
49 / 44 / 39 / 32
55
R410A / 6.5 (2,950)
Electric Expansion Valve
Washable, Anti-Mold
DC Twin Rotary (Inverter)
Manual
Auto
24-Hour ON or OFF Timer, 1-Hour OFF Timer
Auto and 3 steps / Auto (Hi, Me, Lo)
Microprocessor / I.C. Thermister
Wireless Remote Control Unit
Optional
88
31.0
16.0
630 (1,070) / 530 (901) /412 (700)
10.64
8.50
45
42-3/8 s40 s16-3/8
(1,076 s1,016 s416)
12-7/32 s44-7/8 s14-31/32
(310 s1,140 s380)
Remarks: Rating conditions are:
Cooling: Indoor air temperature 80 °F DB / 67 °F WB
Outdoor air temperature 95 °F DB / 75 °F WB
10

Indoor Unit CS-KS30NKU
24BYJ48-1256
Flap Motor
Type Stepping Motor
Rating
Model
Coil Resistance Ohm
(Ambient Temp. 77 °F (25 °C))
Each Pair of Terminal : 200 +/- 7%
DC 12V
Aluminum Plate Fin / Copper Tube
1 and 2
19.5
4.55 (0.423)Face Area
Coil
Rows
Fins Per inch
Heat Exchanger Coil
ft2(m2)
DATA SUBJECT TO CHANGE WITHOUT NOTICE.
Yes
Control PCB
Control Circuit Fuse
Controls
Part No.
Microprocessor
250V 3A
CB-CS-KS30NKU
1 ... D3-15/16 / L32-1 (D100/L838)
Cross-Flow
DC Motor
SIC-41CVJ-D847-1 ... 1
8
-
47
1,370
Internal Controller
Yes
-
-
Fan
Q'ty ... Dia. and Length
Type
inch (mm)
Fan Motor
Nominal Output
Coil Resistance
Rough Measure RPM (Cool)
Type
Model ... Q'ty
No. of Poles
Safety Device
Type
Over-Current Protection
Over-Heat Protection
(Ambient Temp. 68 °F (20 °C))
Run Capacitor Micro F
VAC
W
Ohm
2-2. Major Component Specifications
2-2-1. Indoor Unit
11

Indoor Unit CS-KS36NKU
Flap Motor
Type
Rating
Model
Coil Resistance Ohm
(Ambient Temp. 77 °F (25 °C))
Face Area
Coil
Rows
Fins Per inch
Heat Exchanger Coil
ft2(m2)
DATA SUBJECT TO CHANGE WITHOUT NOTICE.
Control PCB
Control Circuit Fuse
Controls
Part No.
Microprocessor
250V 3A
CB-CS-KS36NKU
Fan
Q'ty ... Dia. and Length
Type
inch (mm)
Fan Motor
Nominal Output
Coil Resistance
Rough Measure RPM (Cool)
Type
Model ... Q'ty
No. of Poles
Safety Device
Type
(Ambient Temp. 68 °F (20 °C))
Run Capacitor Micro F
VAC
W
Ohm
Over-Current Protection
Over-Heat Protection
24BYJ48-1256
Stepping Motor
Each Pair of Terminal : 200 +/- 7%
DC 12V
Aluminum Plate Fin / Copper Tube
1 and 2
19.5
4.55 (0.423)
1 ... D3-15/16 / L32-1 (D100/L838)
Cross-Flow
DC Motor
SIC-41CVJ-D847-1 ... 1
8
-
47
1,370
Internal Controller
Yes
Yes
-
-
12

Outdoor Unit CU-KS30NKUA
2-2-2. Outdoor Unit
P.C.Board
Circuit Fuse
Controls
Part No.
-
250V 25A
POW-CH3082-B2
Noise Filer P.C.B
Microprocessor
400V 3.15A
CR-C3082-F
Control P.C.B
-
-
HIC-CH3072R-C1
H.I.C.Board
DATA SUBJECT TO CHANGE WITHOUT NOTICE.
Pints (cc)
-
Micro F
VAC
External Finish Acrylic baked-on enamel finish
FV68S ... 2.98 (1,400)
-
-
Internal Controller
Yes
Aluminum Plate Fin / Copper Tube
2
21.2
Face Area ft2(m2)8.05 (0.748)
Coil
Rows
Fins per inch
Heat Exchanger Coil
SIC-71FW-D8120-4A ... 1
Compressor Oil ... Amount
8
142
750
Ohm
DC Motor
Type
Compressor Model / Nominal Output
Compressor
Coil Resistance (Ambient Temp. 77 °F (25 °C)) Ohm
DC Twin Rotary (Hermetic)
C-9RVN273H0H / 2,250W
T - R :
T - S :
R - S :
0.169
0.169
0.169
CT (Peak current cut-off control)
Compressor Discharge Temp. Control
Operation cut-off control in abnormal ambient Temp.
Safety Device
Micro F
VAC
Run Capacitor
Crankcase Heater
Yes
Yes
Yes
Overload Relay CS-7L110 Model
Operation Temp. Open : 230 °F (110 °C), Close : 203 °F (95 °C)
-
-
230V 30W
1 ... D19-9/32 (D490)
Fan
Propeller
Q'ty ... Dia. inch (mm)
Type
Type
Over- Heat Protection
(Ambient Temp. 68 °F (20 °C))
Fan Motor
Nominal Output
Coil Resistance
Safety Device
Rough Measure RPM (Cool)
Run Capacitor
Type
Model ... Q'ty
No. of Poles
W
Yes
Over- Current Protection
13

Outdoor Unit CU-KS36NKUA
P.C.Board
Circuit Fuse
Controls
Part No.
-
250V 25A
POW-CH3082-B2
Noise Filer P.C.B
Microprocessor
400V 3.15A
CR-C3682-F
Control P.C.B
-
-
HIC-CH3072R-C1
H.I.C.Board
DATA SUBJECT TO CHANGE WITHOUT NOTICE.
Pints (cc)
-
Micro F
VAC
External Finish Acrylic baked-on enamel finish
FV68S ... 2.98 (1,400)
-
-
Internal Controller
Yes
Aluminum Plate Fin / Copper Tube
2
21.2
Face Area ft2(m2)8.05 (0.748)
Coil
Rows
Fins per inch
Heat Exchanger Coil
SIC-71FW-D8120-4A ... 1
Compressor Oil ... Amount
8
142
750
Ohm
DC Motor
Type
Compressor Model / Nominal Output
Compressor
Coil Resistance (Ambient Temp. 77 °F (25 °C)) Ohm
DC Twin Rotary (Hermetic)
C-9RVN273H0H / 2,500W
T - R :
T - S :
R - S :
0.169
0.169
0.169
CT (Peak current cut-off control)
Compressor Discharge Temp. Control
Operation cut-off control in abnormal ambient Temp.
Safety Device
Micro F
VAC
Run Capacitor
Crankcase Heater
Yes
Yes
Yes
Overload Relay CS-7L110 Model
Operation Temp. Open : 230 °F (110 °C), Close : 203 °F (95°C)
-
-
230V 30W
1 ... D19-9/32 (D490)
Fan
Propeller
Q'ty ... Dia. inch (mm)
Type
Type
Over- Heat Protection
(Ambient Temp. 68 °F (20 °C))
Fan Motor
Nominal Output
Coil Resistance
Safety Device
Rough Measure RPM (Cool)
Run Capacitor
Type
Model ... Q'ty
No. of Poles
W
Yes
Over- Current Protection
14

2-3. Other Component Specifications
Indoor Unit CS-KS30NKU
CS-KS36NKU
Outdoor Unit CU-KS30NKUA
CU-KS36NKUA
032 50 68 86 104 122 140 158 176 194
(0) (10) (20) (30) (40) (50) (60) (70) (80) (90)
40
60
80
100
120
140
160
180
200
20
50
1
0
2
3
4
5
6
7
8
9
10
59 68 77 86 95 104
(10) (15) (20) (25) (30) (35) (40)
• Indoor air temp sensor
(Model:KTEC-35-135-1)
• Indoor heat exchanger sensor
(Model:PTM-D51H-S6-1)
• Compressor temp sensor
(Model:TKS335B)
Resistance (k ohm)
Resistance (k ohm)
Temperature °F (°C)
• Outdoor air temp sensor
(Model:TKS295B)
• Outdoor heat exchanger sensor
(Model:TKS334B)
• Heat sink temp sensor (HIC Board)
(Model:TKS316B)
40
35
30
25
20
15
10
5
0
- 4 5 14 23 32 41 50 59 68
(
- 20)( - 15)( - 10) ( - 5) (0) (5) (10) (15) (20)
Resistance (k ohm)
Temperature °F (°C)
Temperature °F (°C)
15

3. DIMENSIONAL DATA
Indoor Unit CS-KS30NKU
CS-KS36NKU
Unit: inch(mm)
(852-0-0010-196-00-0)
41-15/16 (1065)
9-1/16 (230) (3/32) 7-25/32 Wide tube dia. 5/8" (15.88)
Narrow tube dia. 3/8" (9.52)
1-27/32 1-3/32
2-3/32 25/32
5-1/2
6-7/32
16-11/32
17-5/16
19-9/16
16-11/32
17-21/32
22-3/8
5-3/16
3-3/4 3-3/4 7-7/8
15-1/8 17-23/32
2-11/16
11-13/16
1-7/8
dia. 3-5/32
23/32
1-15/32
1-7/8
9-3/32
5-27/32
2-3/8
5/16 2-3/4
4-9/16
4-9/16
11-13/16 (300)
7-23/32
2-3/4
5-9/16
1-9/32
7/16
2-5/8
2-3/8
3-3/8
2-5/8
dia. 3-5/32
16

Outdoor Unit CU-KS30NKUA
CU-KS36NKUA
Unit: inch(mm)
(852-0-0010-194-00-1)
4-11/32
2-25/32
1-15/16
6-23/32 19/32
31/32
4-3/4
1-3/16
7/16
2-5/32
21/32
1-27/32
1-3/16
2-3/8
3/4
3-3/8
2-17/32
Wiring outlet (knock-out holes dia.1-3/8, 1-3/32, 7/8, 1/2)
6-11/6 25-31/32 4-11/32
2-15/16 2-3/8
2-ID:1-1/4 holes (holes for drain) Of the 4-ID:1-1/4 holes, use 1 of 2 holes specified for drain use to install the port. Use rubber plugs to seal the remaining 3 holes.
1/2
1/2
2-15/16
8-5/84-1/8
37-1/32 (940)
Refrigerant tubing joint (Liquid tube) Flare connection dia.3/8" (9.52)
Refrigerant tubing joint (Gas tube) Flare connection dia.5/8" (15.88)
2-3/8
3/4
1-15/16
1-27/32
1-3/16
4-11/32
13-9/32
14-11/32
Wiring outlet (knock-out holes dia.1-3/8, 1-3/32, 7/8, 1/2)
2-25/32
2-5/32
2-17/32
35-13/16 (910)
23/32
1-1/32
13/32
13-3/8 (340)
14-31/32
16-5/32
11-13/32
17

Wide tube
service
valve
Wide tube
Narrow
tube
service
valve
Narrow tube
Heat exchanger
Heat exchanger
Cooling cycle
Indoor unit Outdoor unit
Electric
expansion
valve
Strainer
M
O.D
5/8"
(15.88 mm)
O.D.
3/8"
(9.52 mm)
4. REFRIGERANT FLOW DIAGRAM
4-1. Refrigerant Flow Diagram
Indoor Unit CS-KS30NKU
CS-KS36NKU
Outdoor Unit CU-KS30NKUA
CU-KS36NKUA
Compressor
Main
Accumulator
Sub
Accumulator
Muffler
H.P.
High pressure
switch
18

5. PERFORMANCE DATA
5-1. Temperature Charts
Indoor Unit CS-KS30NKU
Outdoor Unit CU-KS30NKUA
• Check each performance value in test-run mode. Electrical performance values represent a combined indoor/outdoor value.
NOTE
Cooling Characteristics (RH : 46%, Indoor fan speed : High fan) (60Hz, 230V)
(1) Low pressure performance chart
(2) Operating current performance chart
(3) Indoor discharge air performance chart
-4
(-20) 5 (-15) 14 (-10) 23 (-5) 32 (0) 41 (5) 50 (10) 59 (15) 68 (20) 77 (25) 86 (30) 95 (35) 104 (40)
Outdoor inlet air DB temp. °F(°C)
Outdoor inlet air DB temp. °F(°C)
Outdoor inlet air DB temp. °F(°C)
Operating current (A)
Indoor discharge air temperature °F(°C) Low pressure at wide tube service valve
psig(MPaG)
-4
(-20) 5 (-15) 14 (-10) 23 (-5) 32 (0) 41 (5) 50 (10) 59 (15) 68 (20) 77 (25) 86 (30) 95 (35) 104 (40)
-4
(-20) 5 (-15) 14 (-10) 23 (-5) 32 (0) 41 (5) 50 (10) 59 (15) 68 (20) 77 (25) 86 (30) 95 (35) 104 (40)
57.2 (14)
64.4 (18)
60.8 (16)
53.6 (12)
50.0 (10)
46.4 (8)
42.8 (6)
10
12
14
16
18
20
22
24
26
28
104
(0.7)
117
(0.8)
131
(0.9)
145
(1.0)
159
(1.1)
174
(1.2)
Hi FanLo fan
Hi FanLo fan
Hi FanLo fan
Indoor Air Temp.86°F (30°C)
80°F (27°C)
75°F (24°C)
Indoor Air Temp.86°F (30°C)
80°F (27°C)
75°F (24°C)
Indoor Air Temp.86°F (30°C)
80°F (27°C)
75°F (24°C)
Indoor Air Temp.86°F (30°C)
80°F (27°C)
75°F (24°C)
Indoor Air Temp.86°F (30°C)
80°F (27°C)
75°F (24°C)
Indoor Air Temp.86°F (30°C)
80°F (27°C)
75°F (24°C)
19

Indoor Unit CS-KS36NKU
Outdoor Unit CU-KS36NKUA
Cooling Characteristics (RH : 46%, Indoor fan speed : High fan) (60Hz, 230V)
• Check each performance value in test-run mode. Electrical performance values represent a combined indoor/outdoor value.
NOTE
(1) Low pressure performance chart
(2) Operating current performance chart
(3) Indoor discharge air performance chart
-4
(-20) 5 (-15) 14 (-10) 23 (-5) 32 (0) 41 (5) 50 (10) 59 (15) 68 (20) 77 (25) 86 (30) 95 (35) 104 (40)
Outdoor inlet air DB temp. °F(°C)
Outdoor inlet air DB temp. °F(°C)
Outdoor inlet air DB temp. °F(°C)
Operating current (A)
Indoor discharge air temperature °F(°C) Low pressure at wide tube service valve
psig(MPaG)
-4
(-20) 5 (-15) 14 (-10) 23 (-5) 32 (0) 41 (5) 50 (10) 59 (15) 68 (20) 77 (25) 86 (30) 95 (35) 104 (40)
-4
(-20) 5 (-15) 14 (-10) 23 (-5) 32 (0) 41 (5) 50 (10) 59 (15) 68 (20) 77 (25) 86 (30) 95 (35) 104 (40)
57.2 (14)
60.8 (16)
64.4 (18)
53.6 (12)
50.0 (10)
46.4 (8)
42.8 (6)
10
12
14
16
18
20
22
24
26
28
104
(0.7)
117
(0.8)
131
(0.9)
145
(1.0)
159
(1.1)
174
(1.2)
Hi FanLo fan
Hi FanLo fan
Hi FanLo fan
Indoor Air Temp.86°F (30°C)
80°F (27°C)
75°F (24°C)
Indoor Air Temp.86°F (30°C)
80°F (27°C)
75°F (24°C)
Indoor Air Temp.86°F (30°C)
80°F (27°C)
75°F (24°C)
Indoor Air Temp.86°F (30°C)
80°F (27°C)
75°F (24°C)
Indoor Air Temp.86°F (30°C)
80°F (27°C)
75°F (24°C)
Indoor Air Temp.86°F (30°C)
80°F (27°C)
75°F (24°C)
20