Panasonic DP-3530 User manual

Getting To Know
Your Machine
Before Starting
Making Copies
Function
Accessories
Network Scanner
(Option)
Problem Solving
Others
Digital Imaging Systems
Operating Instructions
(For Copy & Network Scan Functions)
Model No. DP-3530/4530/6030
Before operating this equipment, please read these instructions completely
and keep these operating instructions for future reference.
English
with Options

2
Getting To Know Your Machine
Useful Office Functions
Copy
•Copy up to Ledger size.
Capable of copying text/photos/
halftone originals.
Scan/File
•Monochrome scanner capability
when optional Network Scanner
Module (DA-NS600) is installed.
Scanning resolution up to 600 dpi.
•Adocument can be saved to, or
retrieved from the Network Server
with this Digital Imaging System.
Fax/Email
•Plain Paper High-speed Super
G3 compatible Fax with JBIG
compression when optional Fax
Communication Board (DA-
FG600) is installed.
•Quick-Scan
•Quick Memory Transmission
•Email Function capability when
optional Internet Fax/E-Mail
Module (DA-NF600) is installed.
Print
•Digital printer controller
standard, printer resolution 300
or 600 dpi.
Application Software
•Document Manager
•Document Viewer
•Document Network Scanner∗
•Utilities (Network Status Monitor, Address Book Editor, Device
Configuration Editor)
∗Document Network Scanner is only available when the optional Network Scanner Module (DA-
NS600) is installed.
Multi-Tasking Job Table
Facsimile (Receiving)
Memory
Receiving
Printing Received
Memory Data
Storing
Document
Memory
Transmission
Receiving
Data
Printing
Received Data
Storing
Document
Transmission
to PC
Storing
Document
Printing
Facsimile (Sending)GDI/PCL/PS PrintingNetwork ScanningConcurrent Copy*
Current Job
2nd Job
Copy
Copy
Copy
Concurrent Copy*
Storing Document
Printing
Network Scanning
Storing Document
GDI/PCL/PS Printing
Receiving Data
Printing Received Document
Facsimile (Sending)
Storing Document
Memory Transmission
Facsimile (Receiving)
Memory Receiving
Printing Received
Memory Data
*
: Accepts and executes 2nd Job.
: Accepts and executes 2nd Job (Copy) only if Current Job has been interrupted.
: Accepts 2nd Job and executes the 2nd Job after Current Job has completed.
: Accepts 2nd Job (Concurrent copy printing) and executes the 2nd Job after Current Job (Printing from PC data) has stopped, or at the end of a printing Copy (Electronic/Rotate/Shift/
Staple Sort) or the end of a printing Group (Rotate/Shift Stack). After 2nd Job has completed, the remains of Current Job will restart.
For example
Current Job (PC print): 2 pages x 2 copies with staple sort; 2nd Job (Concurrent Copy): 1 page
> After one operator sets Current Job, another operator sets 2nd Job. 2 pages print stapled (PC print); 1 page prints (Concurrent Copy); 2 pages print with staple (PC print)
: Not accepts 2nd Job.
: None
NOTE ∗: HDD (DA-HD60) and additional 16MB (minimum) Image memory are required.

3
Getting To Know
Your Machine
Operating Instructions Outline
Function
Getting To Know
Your Machine
Before Starting
Making Copies
Options
Problem Solving
Others
●Precautions (See pages 7-13)
●Quick Operation Chart (See pages 14 and 15)
●Adding Paper, Replacing the Toner Bottle,
Removing a Misfed Paper and Error Codes
(See pages 14-29)
●Control Panel Key/Button/Indicator Names
(See pages 31-33)
●Operating Instructions for making copies according
to Function Categories on the LCD Touch Panel
Display (See pages 34-63)
●Changing the Initial Machine Modes
●Copy, Printer, Scanner (Option)
and Fax/Internet Fax (Option) (See pages 64-79)
●Combined Function Table (See page 80)
●Accessories Components (See page 81)
●2-Bin Finisher (DA-FS600)
2-Bin Saddle-Stitch Finisher (DA-FS605)
2-Bin Finisher (DA-FS330)
1-Bin Saddle-Stitch Finisher (DA-FS355A)
(See pages 82 and 83)
●Network Scanner (DA-NS600) (See pages 84 and 85)
●Troubleshooting (See pages 86 and 87)
●Replacing the Battery/Set the Date and Time
(See pages 88 and 89)
●Specifications, Options and Supplies and Index
(See pages 90-98)

4
Getting To Know Your Machine
The following Symbols/Icons are used throughout this operating instructions manual.
Place original(s) on the ADF
Place original(s) on the Platen
(Book)
Place original on the Platen
(Sheet)
Press any Hard Key on the
control panel or touch any Button
on the touch panel display
Input text with a QWERTY
Keyboard
Input numbers
●Number of Copies, etc.
Go to next step
Go to next step (below)
Setting function(s) if required
When making copies
Options
(ex.: Network Scanner)
For scanning document(s)
Getting to know your machine
Before starting
Problem solving
Others
(Specifications, Index)
Options
(ex.: 1-Bin Finisher)
When setting the machine
modes
Press Hard Key Touch any Button
DP-6030
COPY
Symbols/Icons
5

5
Getting To Know
Your Machine
Getting To Know Your Machine
Table of Contents
Getting To Know Your Machine
Useful Office Functions .................................................................................................................. 2
Multi-Tasking Job Table .................................................................................................................. 2
Operating Instructions Outline ...................................................................................................... 3
Symbols/Icons ................................................................................................................................. 4
Precautions...................................................................................................................................... 7
Operation Chart ............................................................................................................................. 14
■Quick Operation Chart ................................................................................... 14
■Problem Solving ............................................................................................. 15
Before Starting
Energy Star .................................................................................................................................... 30
Control Panel ................................................................................................................................. 31
Touch Panel Display ..................................................................................................................... 32
Making Copies
Basic Menu .................................................................................................................................... 34
■Copying the Same Size Originals (1:1) .......................................................... 34
■Positioning Original(s) .................................................................................... 34
■Using the ADF ................................................................................................ 34
■Copying on Heavy Paper (Post Cards, etc.) (35 lb max.) .............................. 35
■Copying with Preset Ratios (Reduction/Enlargement) ................................... 36
■Proof Copying ................................................................................................ 36
■Tandem/Remote Copying ............................................................................... 36
■Tandem/Remote Copy Settings (Registration 1) ............................................ 38
■Tandem/Remote Copy Settings (Registration 2) ............................................ 38
■Tandem/Remote Copy Settings (Editing) ....................................................... 38
■Tandem/Remote Copy Settings (Deleting) ..................................................... 38
■Job Queue ...................................................................................................... 40
■Completion Notice .......................................................................................... 40
2-Sided/Original Copy .............................................................................................................. 42
■1-Sided 2-Sided, 2-Sided 1-Sided, 2-Sided 2-Sided Copy .............. 42
■Book 2-Sided Copy ................................................................................... 42
■2 Page Copy .................................................................................................. 44
■N in 1 Copy .................................................................................................... 44
■Booklet Copy .................................................................................................. 44
■Multi-Size Feeding ......................................................................................... 46
■Job Build and SADF Mode ............................................................................. 46
Sort/Finish ..................................................................................................................................... 48
■When using Sort Mode ................................................................................... 48
Zoom/Effects ................................................................................................................................. 50
■Zoom .............................................................................................................. 50
■Auto Zoom ...................................................................................................... 50
■Edge ............................................................................................................... 50
■Book ............................................................................................................... 50
■Margin ............................................................................................................ 52
■Centering ........................................................................................................ 52
■Image Repeat ................................................................................................. 52
■Inverse ........................................................................................................... 52
■Stamping (Page Numbering) .......................................................................... 54
■Stamping (Date Stamp) .................................................................................. 54
■Stamping (Issue Number Stamping) .............................................................. 54

6
Getting To Know Your Machine
Insertion/Overlay ........................................................................................................................... 56
■Cover .............................................................................................................. 56
■Page Insertion ................................................................................................ 56
■OHP Interleaving ............................................................................................ 56
■Presentation ................................................................................................... 56
■Overlay ........................................................................................................... 58
■File Edit .......................................................................................................... 58
■Form Overlay ................................................................................................. 58
Other Features............................................................................................................................... 60
■Job Memory ................................................................................................... 60
■Double Exposure ............................................................................................ 60
■Skyshot Mode ................................................................................................ 62
■Concurrent Copying ....................................................................................... 62
■Energy Saver (Power Saver Mode, Sleep/Shutdown Mode) ......................... 62
■Interrupt Mode ................................................................................................ 63
Function
■Using Function Modes to Change the Initial Copy Modes ............................. 64
■Procedure ....................................................................................................... 64
■General Settings ............................................................................................ 66
■Copier Settings ............................................................................................... 67
■Scanner Settings ............................................................................................ 68
■Printer Settings ............................................................................................... 69
For Key Operator........................................................................................................................... 70
■General Settings ............................................................................................ 70
■Copier Settings ............................................................................................... 73
■Printer Settings ............................................................................................... 75
Examples ....................................................................................................................................... 76
■Changing the Auto Contrast Setting ............................................................... 76
■Changing the Paper Size ............................................................................... 76
■Weekly Timer ................................................................................................. 76
■Department Counter ....................................................................................... 78
■Network Settings ............................................................................................ 78
Combined Function Table ............................................................................................................ 80
Accessories
Components .................................................................................................................................. 81
Finisher .......................................................................................................................................... 82
Network Scanner (Option)
Registering your PC/Document Scanning .................................................................................. 84
■Registering your PC ....................................................................................... 84
■Document Scanning ....................................................................................... 84
Problem Solving
Troubleshooting ............................................................................................................................ 86
Replacing the Battery/Set the Date and Time ............................................................................. 88
Others
Specifications ................................................................................................................................ 90
Options and Supplies ................................................................................................................... 94
INDEX ............................................................................................................................................. 96
Table of Contents

7
Getting To Know
Your Machine
Getting To Know Your Machine
Precautions
■Laser Safety
■Caution Label
LASER SAFETY
This unit employs a laser. Only qualified service personnel
should attempt to service this device due to possible eye injury.
CAUTION:
USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
Manufacturer’s Name and Address Factory ID

8
Getting To Know Your Machine
Precautions
Power and Ground Connection Cautions
Ensure that the plug connection is free of dust. In a damp environment, a contaminated
connector can draw a significant amount of current that can generate heat and
eventually cause fire over an extended period of time.
Always use the power cord provided with your machine. When an extension power cord
is required, always use a properly rated cord.
●120 V/15 A
If you use a cord with an unspecified current rating, the machine or plug may emit smoke
or become hot to the touch externally.
Do not attempt to rework, pull, bend, chafe or otherwise damage the power cord. Do not
place a heavy object on the cord. A damaged cord can cause fire or electric shocks.
For Your Safety
To prevent severe injury and loss of life, read this section carefully before using the Panasonic
DP-3530/4530/6030 to ensure proper and safe operation of your machine.
■This section explains the graphic symbols used in this Operating Instructions manual.
WARNING:
Denotes a potential hazard that could result in serious injury or death.
CAUTION:
Denotes hazards that could result in minor injury or damage to the machine.
■This section also explains the graphic symbols used in this Operating Instructions manual.
These symbols are used to alert operators to a specific operating procedure
that must not be performed.
These symbols are used to alert operators to a specific operating procedure
that must be emphasized in order to operate the machine safely.
Installation and Relocation Cautions
Do not place the machine near heaters or volatile, flammable, or combustible materials
such as curtains that may catch fire.
Do not place the machine in a hot, humid, dusty or poorly ventilated environment.
Prolonged exposure to these adverse conditions can cause fire or electric shocks.
Place the machine on a level and sturdy surface that can withstand a weight of 158 lb
(72 kg). If tilted, the machine may tip-over and cause injuries.
When relocating the machine, contact your Service Provider.
When moving the machine, be sure to unplug the power cord from the outlet. If the
machine is moved with the power cord attached, it can cause damage to the cord which
could result in fire or electric shock.
CAUTION
WARNING

9
Getting To Know
Your Machine
Never touch a power cord with wet hands. Danger of electric shock exists.
If the power cord is broken or insulated wires are exposed, contact your Service Provider for a
replacement. Using a damaged cord can cause fire or electric shocks.
Stop operation immediately if your machine produces smoke, excessive heat, unusual noise, or smell,
or if water is spilt onto the machine. These conditions can cause fire. Immediately switch Off and
unplug the machine, and contact your Service Provider.
Do not disconnect or reconnect the machine while it is on. Disconnecting a live connector can deform
the plug and cause fire.
When disconnecting the machine, grasp the plug instead of the cord. Forcibly pulling on a cord can
damage it and cause fire or electric shock.
When the machine is not used over an extended period of time, switch it Off and unplug it. If an unused
machine is left connected to a power source for a long period, degraded insulation can cause electric
shocks, current leakage or fire.
Be sure to switch Off and unplug the machine before accessing the interior of the machine for cleaning,
maintenance or fault clearance. Access to a live machine’s interior can cause electric shock.
Be sure to switch Off and unplug the machine before accessing the interior of the machine for
accessing interface cables, maintenance or fault clearance. Access to a live machine’s interior can
cause electric shock.
Once a month, unplug the machine and check the power cord for the following. If you notice any
unusual condition, contact your Service Provider.
●The power cord is plugged firmly into the receptacle.
●The plug is not excessively heated, rusted, or bent.
●The plug and receptacle are free of dust.
●The cord is not cracked or frayed.
Others
■The machine has a built-in circuit for protection against lightning-induced surge current. If lightning strikes in your
neighborhood, switch Off the machine. Disconnect the power cord from the machine and reconnect only when the
lightning has stopped.
■If you notice flickering or distorted images or noises on your audio-visual units, your machine may be causing
radio interference. Switch it Off and if the interference disappears, the machine is the cause of the radio interference.
Perform the following procedure until the interference is corrected.
●Move the machine and the TV and/or radio away from each other.
●Reposition or reorient the machine and the TV and/or radio.
●Unplug the machine, TV and/or radio, and replug them into outlets that operate on different circuits.
●Reorient the TV and/or radio antennas and cables until the interference stops. For an outdoor antenna, ask
your local electrician for support.
●Use a coaxial cable antenna.
Operating Safeguards
Do not touch areas where these caution labels are attached to, the surface may be very hot and may
cause severe burns.
Do not place any liquid container such as a vase or coffee cup on the machine. Spilt water can cause
fire or shock hazard.
Do not place any metal parts such as staples or clips on the machine. If metal and flammable parts get
into the machine, they can short-circuit internal components, and cause fire or electric shocks.
If debris (metal or liquid) gets into the machine, switch Off and unplug the machine. Contact your
Service Provider. Operating a debris-contaminated machine can cause fire or electric shock.
Never open or remove machine covers that are secured with screws unless specifically instructed in
the “Operating Instructions”. A high-voltage component can cause electric shocks.
Do not try to alter the machine configuration or modify any parts. An unauthorized modification can
cause smoke or fire.
WARNING

10
Getting To Know Your Machine
Do not place a magnet near the safety switch of the machine. A magnet can activate the
machine accidentally, resulting in injuries.
Do not use a highly flammable spray or solvent near the machine. It can cause fire.
When copying a thick document, do not use excessive force to press it against the
document glass. The glass may break and cause injuries.
Never touch a labelled area found on or near the heat roller. You can get burnt. If a sheet
of paper is wrapped around the heat roller, do not try to remove it yourself to avoid
injuries or burns. Switch Off the machine immediately, and contact your Service Provider.
Do not use conductive paper, e.g. folding paper, carbonic paper and coated paper. When
a paper jam occurs, they can cause a short circuit and fire.
Do not place any heavy object on the machine. An off-balance machine can tip-over or
the heavy object can fall, causing damage and/or injuries.
Keep the room ventilated when using the machine for an extended period of time to
minimize the ozone density in the air.
When copying with the document cover open, do not look directly at the exposure lamp.
Direct eye exposure can cause eye fatigue or damage.
Pull out paper trays slowly to prevent injuries.
When removing jammed paper, make sure that no pieces of torn paper are left in the
machine. A piece of paper remaining in the machine can cause fire. If a sheet of paper is
wrapped around the heat roller, or when clearing a jammed paper that is difficult or
impossible to see, do not try to remove it by yourself. Doing so can cause injuries or
burns. Switch Off the machine immediately, and contact your Service Provider.
Others
■When clearing a paper jam or other fault, follow the appropriate procedure given in the Operating
Instructions.
Precautions
CAUTION
Consumable Safeguards
Never throw a toner cartridge into an open flame. Toner remaining in the cartridge can
cause an explosion and you can get burnt.
Never throw toner or a waste toner container or a toner cartridge into an open flame. It
can cause an explosion and you can get burnt.
Keep button batteries/stamp out of the reach of children. If a button battery/stamp is
swallowed accidentally, get medical treatment immediately.
Never heat the drum cartridge, or scratch its surface. A heated or scratched drum can be
hazardous to your health.
Do not mix new and old batteries together. Otherwise, batteries can burst or leak,
causing fire or injuries.
Be sure to use the specified type of batteries only.
Ensure that batteries are installed with correct polarity. Incorrectly installed batteries can
burst or leak, resulting in spillage or injuries.
WARNING
CAUTION

11
Getting To Know
Your Machine
For Your Safety
■The maximum power consumption is 1.45 kW.
A properly wired (grounded), dedicated, 15A, 120V AC outlet is required. Do not use an extension cord.
The power cord on this machine must be used to disconnect the main power.
Please ensure that the machine is installed near a wall outlet and is easily accessible.
Caution Note: Unplug the power cord from the wall outlet before removing covers.
Supplies
■Store the Toner Cartridge and paper in cool areas with low humidity.
●Use high quality 16 - 24 lb (Sheet Bypass: 15 - 35 lb) paper.
●For optimum performance, it is recommended that only Panasonic Brand supplies are used in the machine.
●Certain types of transparency film may not be compatible and may damage your machine.
Consult with an authorized Panasonic dealer for advice regarding non-standard paper types.
(Panasonic has tested “3M PP2500” transparency film and found it to be compatible.)
●Panasonic recommends using high quality 16 - 24 lb paper, using an inferior paper may cause excessive paper
curl, requiring you to empty out the Output Tray more often to avoid paper jams.
■Use of other than genuine Panasonic supplies can damage the printer. This may void the warranty of the printer
and supplies. Be sure to use only genuine Panasonic Toner (DQ-TU15E) designed for the machine.
Installation
■The machine should not be installed in areas with the following conditions:
●Extremely high or low temperature and humidity.
Ambient conditions Temperature: 50 – 86 °F
Relative humidity: 30 – 80 %
●Where temperature and humidity can change rapidly, causing condensation.
●Direct exposure to sunlight. ●Directly in the air conditioning flow.
●In areas of high dust concentration. ●In areas of poor ventilation.
●In areas with chemical fume concentration. ●In areas with extreme vibration.
●With unstable or uneven conditions (floors, etc.).
Illegal Copies
It is unlawful to make copies of certain documents.
Copying certain documents may be illegal in your country. Penalties of fines and/or imprisonment may be im-
posed on those found guilty. The following are examples of items that may be illegal to copy in your country.
●Currency
●Bank notes and checks
●Bank and government bonds and securities
●Passports and identification cards
●Copyright material or trademarks without the consent of the owner
●Postage stamps and other negotiable instruments
This list is not inclusive and no liability is assumed for either its completeness or accuracy.
In case of doubt, contact your legal counsel.
Notice:
Install your machine near a supervised area to prevent illegal copies from being made.

12
Getting To Know Your Machine
Ventilation
■The machine should be installed in a well-ventilated area to minimize the ozone density in the air.
WARNING For USA
This product has a fluorescent lamp that contains a small amount of mercury. It also contains lead in
some components. Disposal of these materials may be regulated in your community due to
environmental considerations.
For disposal or recycling information please contact your local authorities, or the Electronics
Industries Alliance: <http://www.eiae.org >.
Handling
■Do not turn the Power Switch Off or open the Front Cover during copying/printing.
■Sleep/Shutdown Mode Notice
●The following functions will not work if the Sleep/Shutdown Mode setting is set to the Shutdown
mode.
When using any of the following functions, we recommend that you leave the Sleep/Shutdown
Mode in the initial factory default setting (Sleep mode). (See page 70)
• Printer Function (Local Parallel Port and Network Connections)
• Internet Fax/Email Function (Option)
• Facsimile Function (Option)
When the LAN cable is not connect and DHCP Default is "Yes" (See page 71)
Precautions
FCC WARNING:
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct
the interference at his/her own expense.
The user could lose the authority to operate this equipment if any unauthorized changes or
modifications are made to this equipment.

13
Getting To Know
Your Machine
■Key Operator Password
●The Initial Machine Modes can be checked or changed with the Function Modes, however, these modes require
the Key Operator Password.
For Key Operator :
When setting up this machine, please consult with the authorized service provider,
and decide on the Key Operator Password together, then record it and keep it in a
safe place for future reference.
■Dept. (Departmental) Code
When the Department Counter function is set up, the Dept. (Department) Code input screen is displayed on the
LCD Display. A registered Department Code (1 to 8-digit) is required to gain access to each secured function, or
the secured Copy/Fax/Scanner function(s) cannot be used. Please consult with the Key Operator regarding the
Department Code(s) for the desired function.
Procedures :
Input a registered department code (1 to 8-digit).
Press the SET or START Key.
■Number of Copies
The maximum number of copies is up to 999 (3 digit with keypad). During the copy mode, if you input 4-8 digit
numbers, they will be interpreted as being a phone number and displayed on the LCD, then the machine will
switch to the Fax mode.
■Memory Full
If memory overflows during original scanning, the message “MEMORY FULL CONTINUE? 1:YES 2:NO” will be
displayed on the LCD. If this occurs, follow the instructions on the LCD. If this occurs frequently, adding optional
memory is recommended, consult with an authorized service provider.
■Maximum Copies Limitation
After setting the maximum allowed number of copies for each department (see page 79), consult with your Key
Operator when the total copy count reaches the designated limit and the “DEPT.MAXIMUM COPIES HAS BEEN
REACHED” message appears on the LCD.
■Power Switch
If you are not going to use the copier for long periods of time, turn OFF the Power
Switch on the Left Side of the machine and wait 10 seconds then, turn OFF the
Main Power Switch on the Back Side of the machine.
■Auto Reset Time
As the initial setting for Auto Reset Time is 1 minute, selected default operation mode backs to default operation
mode after 1 minute. If you wish to change Auto Reset Time, consult your Key operator. (See page 70)
■Hard Disk Deletion
There is a possibility that the machine may retain image data on the Hard Disk Drive. The Hard Disk Deletion
function overwrites the entire image data area with fixed data at Medium and with random data at High security
level setting respectively. However, the FAX/IFAX Address Book* data will not be overwritten.
(* Refer to the Operating Instructions for Facsimile and Internet Fax/Email Functions)
While this function is executing, other functions will not be accepted. The overwriting may require more time when
this function is set to a higher security level (Medium or High).
Once the execution of this function starts, the process can only be cancelled by turning the Sub Power Switch to
the OFF position.

14
Getting To Know Your Machine
Operation Chart
If set in other
function mode
Face Up
Original Guides
Adjust to the original’s width
From
ADF
From
Platen
Face Down
●If the original is not positioned
properly, a portion of the original
may not be copied.
●For originals smaller than Invoice
size, position the original within
the Invoice area and select
Invoice.
or
Tray
Max. 70 originals
●Adding Paper (550-Sheet Paper Tray 2-4)
●Adding Paper (Sheet Bypass)
Copying on Special Paper, etc.
Paper Weight: 16-24 lb Paper Capacity: 550 Sheets (20 lb)
Load Paper
(Do not exceed limit mark)
Approximately up to 50
Letter size sheets/20 lb
Paper Weight: 15-35 lb
To add paper to the Sheet Bypass,
remove the paper left on the tray, and
align it with the added paper and load
them together onto the tray.
Adjust the side guides.
Incorrect adjustment may cause the
paper to wrinkle, misfeed or skew.
NOTE:
If the paper size is not detected,
remove paper and press Reset Key.
Then, load the paper again.
Turn the Main
Power Switch On
(Back side of the
Copier)
(See page 13)
Original Guides
■Quick Operation Chart
INV
INV LTR LGL LDR
LTR
LDR
INV
LTR
LGL
INV
INVOICE
INVOICE-R
LETTER-R
LEGAL
LEDGER
LETTER
COPY
Max Level Indicator
Sheet Bypass
Until it Stops
Face Down
Side Guides
NOTE:
When changing the paper size, refer to page 76.
Paper Tray 3 and 4 (Option)
1550-Sheet Paper Tray (See page 16)
3000 Sheet Large Capacity Paper Tray (Option) (See Page 16)
1 2
1 2 3
4
4
1 2 3
4
4
Turn the
Power Switch
on the Left
side of the
machine to the
ON position.
Load Paper
Original

15
Getting To Know
Your Machine
Reduction/Enlargement only
(See page 36)
Select desired settings
Number of Copies
(Max. 999)
Adjust the Manual Exposure
or
Select type of Original(s)
Mainly Text Text and Photo
combined
Mainly Photo
Copy Jobs
(See pages 34-41) (See pages 42-47) (See pages 48 and 49)
(See pages 50-55) (See pages 56-59) (See pages 60-63)
■Problem Solving
Adding Paper
(See pages 14-17)
Replacing Toner Bottle
(See pages 16 and 17)
Replacing Toner Waste
Container
(Call your Service provider)
Replacing Staple
Cartridge
(See pages 18-21)
●When the optional
Finisher is
installed.
Removing a Misfed
Paper
(See pages 20-29)
User Error Code
(See page 21)
Machine Error Code
(Call your Service provider)
COPY
SIZE
UXX
EXX
3 4 5
ex: DA-FS330
BASIC MENU Tab 2-SIDED/ORG. COPY Tab SORT/FINISH Tab
ZOOM/EFFECTS Tab INSERTION/OVERLAY Tab JOB MEMORY Tab

16
Getting To Know Your Machine
Hopper
2
1
Toner Bottle
Toner Hopper
Face-Up
Paper Feed Tray
2
1
Max Level Indicator
Operation Chart
■Problem Solving
●Adding Paper (3000-Sheet Large Capacity Paper Tray (LCT) (Option))
●Adding Paper (1550-Sheet Paper Tray 1)
Do not touch the tray while
it is moving.
1 2
1 2
Paper Weight: 16-24 lb
3
Paper Capacity: 1550 Sheets (20 lb)
●Replacing Toner Bottle/Replacing Toner Waste Container
1 2
6
After tray stops, place paper neatly on
the tray. Letter∗size only (Portrait).
∗Letter-R/Legal size is available when
optional Letter-R/Legal Size LCT
Adapter (DA-TK31) is installed.
•When using paper with
one side already printed,
load the paper with the
unprinted side facing
upward.
Replace Toner Bottle
Replace Toner Waste
Container
(Call your Service provider)
Toner Hopper
7

17
Getting To Know
Your Machine
2Empty Toner Bottle
1
New Toner Bottle
10 to 15 times
Cap
Overfill Indicator
Paper Capacity: 3000 Sheets (20 lb)
4
3 4
ATTENTION
●For optimum copy quality it is recommended that
only Panasonic Brand toner is used in the copier.
Store toner in a cool dark area with low humidity.
Do not unseal the toner bottle unless you are
ready to use it.
3 4 5
6
8
Shake the new Toner Bottle
well to loosen the contents.

18
Getting To Know Your Machine
Staple Cartridge
Staple Cover
Stapler Cover
2
1
Lock Lever
Stapler Unit
Stapler Cover
Operation Chart
■Problem Solving (Common Operation)
●2-Bin Finisher (DA-FS330)
●Replacing the Staple Cartridge (Common Operation) (When optional Finisher is installed.)
1
DA-FS330 1
Replace the Staples Case
as following procedures.
For 1-Bin Saddle-Stitch
Finisher (DA-FS355A)
(See page 20)
●2-Bin Finisher (DA-FS600)/2 Bin Saddle-Stitch Finisher (DA-FS605)
or
Add Staples
DA-FS355A/FS600/FS605
2 3
8 97
1 2 3
When supplying the Saddle Stitcher Unit with staples (DA-FS605 only)
Lower Front
Cover Green Handle
Stitcher Unit
1 2 3

19
Getting To Know
Your Machine
Staple Cartridge
Empty New
2
1
Tape
New
Empty
2
1
Tape
Empty
2
1
New
Staple Cartridge
Number of Copies
(Max. 999)
34
Check the
operation
2
4 5 6
7
10
4 5 6
4 5 6
7
Close the
Staple Cover.
When the Staple is jammed
●The following message will
be displayed on the Touch
Panel Display:
"Can Not Complete
Confirm Staple Unit"
For DA-FS330: For DA-FS600/FS605:
Jammed
Staple
2
1
3
Jammed
Staple 21
3
Stitcher Unit
Until it
stops
Close the Lower Front Cover.

20
Getting To Know Your Machine
Stapler Unit
Staple Cartridge
Tape
Stapler Unit
2
1
Blue Mark
Finisher Front Cover
Operation Chart
■Problem Solving (Continued)
●1-Bin Saddle-Stitch Finisher (DA-FS355A)
●Removing a Misfed Paper (Locations)
1 2 3
8 97
Misfed Location Indicator
●Indicates to open each cover, check
and remove any misfed paper.
DA-FS330 DA-FS355
DA-FS355A
DA-FS600 DA-FS605
A
B
CD
E
FG
H
I
J
Finisher
i-ADF
Copier
ADU
Paper Feed Unit
LCT
H: Finisher (See page 26)
J: i-ADF (See page 24)
A: System Console (See page 24)
B: Paper Entry Area (See page 22)
C: Paper Transport Area (See page 22)
D: Paper Exit/Fuser Area (See page 22)
E: ADU Area (See page 24)
F: Reverse Area (See page 22)
G: LCT Large Capacity Paper Tray Area (See page 26)