Panasonic DMRE20 - DVD VIDEO RECORDER User manual

EB GH
DVD Video Recorder
Operating Instructions
Model No. DMR-E20
Before connecting, operating or adjusting this product,
please read these instructions completely.
Please keep this manual for future reference.
RQT6037-B
(For UK Customers Only)
E‑cover.fm1ページ２００１年９月６日 木曜日 午後４時１２分

2
Contents
Contents ...................................................................................... 2
Dear Customer ............................................................................ 3
Checking the Accessories ......................................................... 3
Warning and Important Information.......................................... 4
Control reference guide ............................................................. 5
Main unit ....................................................................................... 5
Remote control ............................................................................. 6
Batteries [A] .................................................................................. 6
Use [B] .......................................................................................... 6
The unit’s display .......................................................................... 7
Discs ............................................................................................ 8
Discs you can use......................................................................... 8
Discs you can use for recording and play..................................... 8
Play-only discs.............................................................................. 8
Discs that cannot be played.......................................................... 9
Audio format logos........................................................................ 9
Types of disc for the type of connected TV .................................. 9
Setting the remote control to operate your TV ...................... 10
Television operation.................................................................... 10
Operating other Panasonic DVD equipment
with the remote control............................................................. 10
Connections (with Scart leads) ............................................... 11
Connections (with S-Video cable)........................................... 12
Auto Setup (with Q Link Functions)........................................ 13
To Setup this DVD Recorder with a brand-new Q Link TV......... 13
To Set Up this VCR with an existing Q Link TV.......................... 14
Auto Setup (without Q Link Functions).................................. 14
Video Plus+ Codes for Satellite Receivers/Cable TV ............ 15
Selecting TV screen type ......................................................... 16
Playing discs............................................................................. 17
Starting play from where you stopped it (Resume Function)...... 18
Fast forward and rewind—SEARCH........................................... 19
Slow-motion play ........................................................................ 19
Frame-by-frame viewing ............................................................. 19
Skipping ...................................................................................... 20
Starting play from a selected programme, title,
chapter or track ........................................................................ 20
Manual Skip ................................................................................ 21
Selecting an amount of time to skip—Time Slip ......................... 21
Changing audio........................................................................... 22
Programme play ......................................................................... 23
Random play............................................................................... 24
Recording television programmes.......................................... 25
Playing while you are recording.............................................. 28
Playing from the beginning of the programme you are recording—
Follow-on play [A] ..................................................................... 28
Simultaneous recording and play [B] .......................................... 28
Checking the recording during recording (TIME SLIP) [A] .......... 29
Watching the television while recording...................................... 29
Using the top window............................................................... 30
About the top window ................................................................. 30
Using the top window.................................................................. 30
Timer recording ........................................................................ 32
Manual programming.................................................................. 35
To check programmes ................................................................ 37
Starting and canceling programmes........................................... 37
Recording from a video cassette player................................. 38
Entering titles............................................................................ 40
DISC INFORMATION................................................................. 41
Enter Title ................................................................................... 41
Disc Protection............................................................................ 42
Releasing disc protection............................................................ 43
Format ........................................................................................ 44
Finalize—Creating DVD-Video ................................................... 45
Using the direct navigator ....................................................... 46
Selecting programmes to play .................................................... 46
Erasing programmes .................................................................. 48
Entering and editing programme titles ........................................ 49
Checking programme contents ...................................................50
Protecting programmes............................................................... 51
Releasing programme protection ................................................ 52
Erasing parts of a programme.....................................................53
Using play lists to edit programmes ....................................... 55
Displaying play lists..................................................................... 55
Creating play lists........................................................................ 56
Playing play lists.......................................................................... 57
Playing play list scenes ............................................................... 58
Adding scenes to a play list......................................................... 58
Moving a scene ........................................................................... 59
To re-edit a play list scene .......................................................... 60
Erasing a scene from a play list .................................................. 60
Copying play lists ........................................................................ 61
Erasing a play list ........................................................................ 62
Titling play lists............................................................................ 63
Checking play list’s contents .......................................................63
Using on-screen menu icons ...................................................64
Common procedures................................................................... 64
Icons for disc information ............................................................65
Icons for unit information............................................................. 66
Repeat play [A]............................................................................ 67
A-B repeat play [B] ...................................................................... 67
Enjoying virtual surround sound effects (V.S.S.) [C].................... 67
Marking places to play again—MARKER.................................... 68
Auto recording from Digital Video (DV) equipment ............... 69
Child Lock.................................................................................. 70
To activate the child lock............................................................. 70
To cancel the child lock...............................................................70
Upgrading your system ............................................................ 70
Enjoying more powerful sound .................................................... 70
Connecting a digital amplifier or system component [A].............. 71
Connecting an analogue amplifier or system component [B] ...... 71
Connecting a Decoder [C] ........................................................... 72
Connecting a satellite receiver or digital receiver [D] .................. 72
Connecting a video cassette recorder [E].................................... 73
Changing the unit’s settings....................................................74
Common procedures................................................................... 74
Summary of settings ................................................................... 75
Entering a password ................................................................... 78
Digital output ............................................................................... 78
Off Timer Setting ......................................................................... 79
Remote Setting ........................................................................... 80
Clock Settings ............................................................................. 81
Channel Settings......................................................................... 83
Re-initialize Setting ..................................................................... 85
On-screen displays ................................................................... 86
Changing the information displayed............................................ 86
Display examples ........................................................................ 86
Maintenance and Handling....................................................... 87
Maintenance................................................................................ 87
Disc handling............................................................................... 87
Glossary..................................................................................... 87
Self-diagnosis............................................................................ 89
Error displays ............................................................................ 90
Troubleshooting guide ............................................................. 91
Specifications............................................................................ 94
Index........................................................................................... 95
DVD(PAL)‑contents.fm2ページ２００１年９月６日 木曜日 午後４時１２分

3
May we take this opportunity to thank you for purchasing this Panasonic DVD Video Recorder.
We would particularly advise that you carefully study the Operating Instructions before attempting to operate the unit and that you note the
listed precautions.
For the United Kingdom
Dear Customer
Caution for AC Mains Lead
For your safety please read the following text carefully
This appliance is supplied with a moulded three-pin mains plug
for your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the
replacement fuse has a rating of 5-amperes and it is approved by
ASTA or BSI to BS 1362.
Check for the ASTA mark Ïor the BSI mark Ìon the body of
the fuse.
If the plug contains a removable fuse cover you must ensure that
it is refitted when the fuse is replaced.
If you lose the fuse cover, the plug must not be used until a
replacement cover is obtained.
A replacement fuse cover can be purchased from your local
Panasonic Dealer.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE
SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD
BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF
SAFELY. THERE IS A DANGER OF SEVERE ELECTRICAL
SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY
13-AMPERE SOCKET.
If a new plug is to be fitted please observe the wiring code as
shown below.
If in any doubt, please consult a qualified electrician.
IMPORTANT
The wires in this mains lead are coloured in accordance with the
following code:
Blue; Neutral, Brown; Live
As the colours of the wires in the mains lead of this appliance may
not correspond with the coloured markings identifying the
terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the
terminal in the plug which is marked with the letter N or coloured
BLACK.
The wire which is coloured BROWN must be connected to the
terminal in the plug which is marked with the letter L or coloured
RED.
Under no circumstances should either of these wires be
connected to the earth terminal of the three pin plug, marked with
the letter E or the Earth Symbol Ó.
How to replace the Fuse
≥There are two types of the AC mains lead assembly:
Aand Bas shown.
1Open the fuse compartment with a screwdriver.
2Replace the fuse and fuse cover.
12
12
TYPEA
TYPEB
Checking the Accessories
Check that you have the accessories shown
≥Order accessory and consumable items for all Audio Visual Products with ease and confidence either by telephoning our Customer Care
Centre on 08705 357357 Mon-Fri 9:00am-5:30pm
≥Or go on line through our Internet Accessory ordering application at www.panasonic.co.uk.
≥Most major credit and debit cards accepted.
≥All enquires transactions and distribution facilities are provided directly by Panasonic UK Ltd.
≥It couldn’t be simpler!
(For UK Customers Only)
∏
∏∏
∏Audio Video Cable
K2KA6CA00001
∏
∏∏
∏Remote Control
N2QAKB000011
∏
∏∏
∏Batteries for the Remote Control
R6 size
∏
∏∏
∏RF lead to connect VCR and TV
K2KF2BA00001
or
K1TWACC00001
∏
∏∏
∏AC Mains lead
RJA0053-3X
Tick off as you
unpack the
accessories.
∏
∏∏
∏Guarantee Card
E‑safety.fm3ページ２００１年９月６日 木曜日 午後４時１３分

4
Warning and Important Information
Important
Your attention is drawn to the fact that the recording of
pre-recorded tapes or discs or other published or broadcast
material may infringe copyright laws.
Warning
To reduce the risk of fire or shock hazard, do not expose this
equipment to rain or moisture.
For your safety
Do not remove outer cover.
Touching internal parts of the unit is dangerous, and may seriously
damage it.
To prevent electric shock, do not remove cover. There are no user
serviceable parts inside. Refer all servicing to qualified service
personnel.
For your safety, be sure not to connect or handle the equipment
with wet hands.
Disposal of old equipment
Batteries, packaging and old equipment should not be
disposed of as domestic waste, but in accordance with
the applicable regulations.
Cautions before you operate this unit
Avoid:
≥Humidity and dust.
≥Extreme heat such as direct sunlight.
≥Magnets or electromagnetic objects.
≥Touching internal parts of the unit.
≥Water or some other liquid.
≥Lightning. (Disconnect the aerial plug from the unit during
lightning storms.)
≥Anything heavy on the unit.
≥Connecting or handling the equipment with wet hands.
≥Using a cell phone near the unit because doing so may cause
noise to adversely affect the picture and sound.
Do:
≥Wipe the unit with a clean and dry cloth.
≥Install the unit in a horizontal position.
≥Keep the unit, TV and other equipment switched off until you
have finished all connections.
VIDEO Plus+ and PlusCode are registered trademarks of Gemstar
Development Corporation.
The VIDEO Plus+ system is manufactured under license from
Gemstar Development Corporation.
“i.LINK” is the name of the connector in accordance with the
IEEE1394-1995.
“¥” is the logo marked on products conforming with the “i.LINK”
specifications.
≥You cannot control this unit from the digital video equipment even
if using the DV cable.
Notes on these instructions
These operating instructions describe operations mainly using the
remote control. If the name of the button is the same, the operation
described can also be performed with the main unit.
The contents of the screens used in these instructions may not
necessarily match what you will see on your screen.
Displays
The displays shown in these instructions are examples only. Actual
displays depends on the disc being played.
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are trademarks of
Dolby Laboratories.
“DTS”, “DTS Digital Surround” and “DTS Digital Out” are registered
trademarks of Digital Theater Systems, Inc.
Inside of unit
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS
TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND
THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS
VASES, SHALL BE PLACED ON THE APPARATUS.
As this equipment gets hot during use, operate it in a well
ventilated place;
do not install this equipment in a confined space such as
a book case or similar unit.
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
CLASS1
LASERPRODUCT
DANGER
VISIBLE OR INVISIBLE LASER RADIATION WHEN OPEN.
Do not disassemble.
Do not service.
Ne Pas Démonter.
RéservéAu Personnel Autorisé.
Nicht auseinandernehmen.
Keine Reparatur oder
VGN9336-1Z
Wartung erlaubt.
AVOID DIRECT EXPOSURE TO BEAM.
RAYONNEMENT LASER VISIBLE OU INVISIBLE EN CAS
D’OUVERTURE. EXPOSITION DANGEREUSE AU FASCEAU.
SICHTBARE ODER UNSICHTBARE LASERSTRAHLUNG,WENN
ABDECKUNG GEÖFFNET. NICHT DEM STRAHL AUSSETZEN.
SYNLIG ELLER OSYNLIG LASERSTRÅLNING NÄR DENNA
DEL ÄR ÖPPNAD. STRÅLEN ÄR FARLIG.
ATTENTION
VORSICHT
VARNING
E‑safety.fm4ページ２００１年９月６日 木曜日 午後４時１３分

5
Control reference guide
Main unit
Front Page
(1) POWER switch (Í/I) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 014
≥To switch the unit from on to standby mode or vice versa. In
the standby mode, the unit is still connected to the mains.
≥In standby mode, the unit is still consuming a small amount of
power.
(2) Standby indicator
≥When the unit in connected to the AC power supply cord, this
indicator lights up in standby mode and goes out when the
unit is turned on.
(3) Recording mode button (REC MODE). . . . . . . . . . . . . . . 25
(4) Channel up/down button (W, X). . . . . . . . . . . . . . . . . . . . 25
(5) Recording button (¥, REC) . . . . . . . . . . . . . . . . . . . . . . . 25
(6) Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
(7) Disc tray open/close button (<, OPEN/CLOSE). . . . . . . 17
(8) Stop button (∫) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
(9) Pause button (;). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
(10)Play button (1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
(11)Time slip button and roller (TIME SLIP) . . . . . . . . . . . . . 29
(12)AV3 input sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
(13)DV input terminal (DV INPUT) . . . . . . . . . . . . . . . . . . . . . 69
(14)External link button (EXT LINK) . . . . . . . . . . . . . . . . . . . . 27
(15)Timer recording button (Á, TIMER REC) . . . . . . . . . . . . 33
(16)Disc tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
(17)Top window button (TOP WINDOW) . . . . . . . . . . . . . . . . 30
(18)Cursor buttons (3, 4, 2, 1). . . . . . . . . . . . . . . . . . . . . . 18
(19)Enter button (ENTER) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
(20)Return button (RETURN) . . . . . . . . . . . . . . . . . . . . . . . . . 18
(21)Slow/Search buttons (SLOW/SEARCH, 6, 5) . . . . . 19
(22)Skip buttons (SKIP, :, 9) . . . . . . . . . . . . . . . . . . . . 20
Rear Page
(23)AC input socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
(24)Digital audio output socket . . . . . . . . . . . . . . . . . . . . . . . 71
(25)S-video/video/audio output socket(s). . . . . . . . . . . . . . . 12
(26)AV4 input sockets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
(27)AV1 (TV) socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
(28)AV2 (DECORDER/EXT) socket . . . . . . . . . . . . . . . . . . . . 72
(29)RF input socket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
(30)RF output socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
OPTICAL
AC IN
T
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
RF-IN
RF-OUT
AV2 [DECODER/EXT]
AV1 [TV]
S VIDEO
AV 4
IN
VIDEO
L
R
AUDIO
OUT
( 23 ) ( 24 )
(
27 )( 29 )( 25 )
( 26 )( 28 )( 30 )
ªOpening the front panel
Open the front panel to access other controls and input terminals.
REC MODE
DV INPUT
EXT
LINK
TIMER
REC
OPEN/CLOSE
/I
REC
TOP
WINDOW
ENTER
RETURN
TIME SLIP
(1) (2) (3) (4) (5) (6) (7) (8)(9)( 10 )( 11 )
(
12 )( 13 )( 14 )( 15 )( 16 )(
17 )
(
18 )
(
19 )
(
20 )(
21 )
(
22 )
E‑Text1.fm5ページ２００１年９月６日 木曜日 午後４時１３分

6
Remote control
Page
(31)TV channel buttons (TV, W, X) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 010
(32)TV power on/off button (TV, Í) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 010
(33)Television input mode selector (TV, TV/AV) . . . . . . . . . . . . . . . . . . . . . . . . . . . 010
(34)Top menu and Direct Navigator button
(TOP MENU, DIRECT NAVIGATOR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18, 46
(35)Joystick (3, 4, 2, 1)/Enter button (ENTER). . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
(36)Manual programming and check button (PROG/CHECK) . . . . . . . . . . . . . . . . . . 35
(37)Top window and TV aspect button (TOP WINDOW, TV ASPECT). . . . . . . . . . . . 23
(38)Video Plus+ button (SV/V+). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
(39)Time slip button (TIME SLIP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
(40)Manual skip button (MANUAL SKIP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
(41)Direct TV recording button (¥, DIRECT TV REC) . . . . . . . . . . . . . . . . . . . . . . . . . 27
(42)DVD/TV switch (DVD, TV) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
(43)This button does not operate on this unit
(44)TV volume up/down buttons (TV VOL, r, s) . . . . . . . . . . . . . . . . . . . . . . . . . . 010
(45)Display button (DISPLAY) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
(46)Menu and Play List button (MENU, PLAY LIST) . . . . . . . . . . . . . . . . . . . . . . . 18, 55
(47)On-screen menu display and TV/TEXT button (STATUS, TV/TEXT) . . . . . . . . . 86
(48)Frame advance and frame reverse buttons (FRAME) . . . . . . . . . . . . . . . . . . . . . 19
(49)Numeric buttons (0–9, – /– –) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
≥When selecting a title, chapter, track, programme, or play list
Example: “5”: [0] )[5]
Example: “15”: [1] )[5]
≥When selecting a page of play list scene
Example: “5”: [0] )[0] )[5]
Example: “15”: [0] )[1] )[5]
≥When selecting a television channel
Example: “5”: [5]
Example: “15”: [ ] )[1] )[5]
(50)Cancel button (CANCEL). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
(51)Last marker button (LAST MARKER). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
(52)Audio button (AUDIO) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
(53)Set up button (SET UP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
(54)Input select button (INPUT SELECT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Buttons such as 1function the same as the controls on the unit.
Batteries [A]
≥Insert so the poles (iand j) match those in the remote control.
≥Do not use rechargeable type batteries.
Do not;
≥mix old and new batteries.
≥use different types at the same time.
≥heat or expose to flame.
≥take apart or short circuit.
≥attempt to recharge alkaline or manganese batteries.
≥use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can damage items the fluid
contacts and may cause a fire.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any part of your body.
Remove if the remote control is not going to be used for a long period of time. Store in a cool,
dark place.
Replace if the unit does not respond to the remote control even when held close to the front
panel.
Use [B]
Aim at the sensor, avoiding obstacles, at a maximum range of 7 m directly in front of the unit.
≥Keep the transmission window and the unit’s sensor free from dust.
≥Operation can be affected by strong light sources, such as direct sunlight, and the glass doors
on cabinets.
Do not;
≥put heavy objects on the remote control.
≥take the remote control apart.
≥spill liquids onto the remote control.
/
TV
TV/AV
PROG / CHECK
TOP WINDOW
TV/TEXT
STOP
SV/V+
REC
TIME SLIP
AV LINK
SETUP
AUDIO
REC MODE CANCEL
INPUT
SELECT
MANUAL
SKIP
LAST
MARKER
DIRECT
TV REC
TIMER
REC
123
456
789
0
PAUSE PLAY
STATUS
RETURN
VOL
OPEN/CLOSE
T
C
E
R
I
D
R
O
T
A
G
I
V
A
N
T
O
P
M
E
N
U
M
E
N
U
D
I
S
P
L
A
Y
T
S
I
L
Y
A
L
P
ENTER
TVDVD
TV ASPECT
VOL
FRAME
SKIP SLOW/SEARCH
Á
1
F
8
3
5
7
D
E
:
4
?
9
( 31 )
(
32 )
(
33 )
(
34 )
(
35 )
(
36 )
(
37 )
(
38 )
(
39 )
(
40 )
(
42 )
(
41 )
(
43 )
(
44 )
(
45 )
(
46 )
(
47 )
(
48 )
(
49 )
(
50 )
(
51 )
(
52 )
(
53 )
(
54 )
/
A
B
R6, AA
1
2
30
30
TVDVD
(1)
(2)
(3)
(4)
(1) Push in and down on the (j) end.
(2) Remote control signal sensor
(3) 7 m
(4) Switch [TV/DVD] to “DVD”.
Control reference guide (continued)
E‑Text1.fm6ページ２００１年９月６日 木曜日 午後４時１３分

7
Control reference guide (continued)
The unit’s display
(1) Disc type
DVD-RAM: DVD-RAM
DVD-R: DVD-R
DVD VIDEO: DVD-Video
VIDEO CD: Video CD
CD: Audio CD
(2) Play mode
PGM: programme play
RND: random play
A-B :A-B repeat play
:repeat play
PGM :programme repeat play
(3) Multi-angle (page 65)
(4) Audio signal type
MLT.CH: a signal with 3 or more channels
(5) Timer programme display
On:
when a programme for timer recording is on (pagse 33 and 36)
Flashes:
when there are less than 10 minutes to go before timer
recording is programmed, but the unit is not on standby.
(6) Recording mode (pages 26 and 33)
XP: High-quality mode
SP: Normal mode
LP: Long play mode (4 hours)
EP: Long play mode (6 hours)
XP SP LP EP (all on):
FR (flexible recording) mode (only with timer recording)
(7) Timer indicator
ON: the start time for a timer recording
OFF:
the end time for a timer recording or the time left until recording
stops
(8) The display mode of the main display section
TITLE: title number
TRACK: track number
CHAP: chapter number
PG: programme number
PL: play list number
(9) Volume level meter
(10)EXT Link
On:
when EXT LINK function is on (page 27)
(11)Channel
1, 2, 3, ....., 99 / AV1,AV2, AV3, AV4 / DV
(12)Main display section
Timer recording
Recording and play counter
Remaining disc time
Current time
Title, track, chapter, direct navigator and play list page
numbers
Miscellaneous messages
etc.
(1) (2) (3) (4) (5) (6) (7) (8)
(
9 )( 11 )( 10 )( 12 )
Center circle
Rotating (REC): recording
Stopped (REC): recording paused
Rotating (REC, PLAY):
recording and playing simultaneously or
Time Slip is in progress
Rotating (PLAY): playing
Stopped (PLAY): play paused
E‑Text1.fm7ページ２００１年９月６日 木曜日 午後４時１３分

8
Discs you can use
The features you can use with the different types of discs are
indicated as follows.
[RAM] [DVD-R] [DVD-V] [CD] [VCD]
For your reference
≥[DVD-R] indicates DVD-R that have not yet been finalized
(page 45) and can still be recorded on.
≥DVD-R that have been finalized can use the same features as
DVD-Video. (Refer to features indicated [DVD-V].)
Discs you can use for recording and play
Logos for the discs you can record on and play
The manufacturer accepts no responsibility and offers no
compensation for loss of recorded or edited material due to a
problem with the unit or disc, and accepts no responsibility
and offers no compensation for any subsequent damage
caused by such loss.
Examples of causes of such losses are
(1) A disc recorded and edited with this unit is played in a DVD
recorder or computer disc drive manufactured by another
company.
(2) A disc used as described in (1) and then played again in this
unit.
(3) A disc recorded and edited with a DVD recorder or computer
disc drive manufactured by another company is played in this
unit.
Note
≥Do not allow the disc to become dirty or scratched. Fingerprints,
dirt, dust, and scratches on the recording surface may make it
impossible to use the disc for recording.
≥If you use DVD-RAM cartridges, you can protect your recordings
with the write protected tab (page 90). With the tab in this
position, you cannot record to the disc, delete programmes with
the direct navigator,edit with the play list screen, or format the
disc.
≥This unit is compatible with both non-cartridge and cartridge
DVD-RAM, but cartridge-type discs give better protection to your
valuable recordings.
For your reference
≥DVD-RAM recorded on this unit cannot be played on
incompatible players (including players manufactured by
Panasonic).
≥Using a Panasonic DVD-RAM, you can record broadcasts that
allow you to make one copy, such as some satellite broadcasts.
≥This unit cannot record PAL signals to discs containing NTSC
signals or vice versa.
≥This unit cannot record to discs containing both PAL and NTSC
signals. Play of discs recorded with both PAL and NTSC on
another unit is not guaranteed.
Play-only discs
Discs you can play-only and their logos
Region Management Information (DVD-Video only)
Region number are allocated to DVD players and software
according to where they are sold.
≥For the United Kingdom : “2”
≥For Hong Kong Special Administrative Region of
China : “3”
DVD-Video can be played on this unit if their region
number is the same or includes the same number, or if
the DVD is marked “ALL”. Confirm the region number for
this unit before choosing discs. The number for this unit
is indicated on the rear panel of the unit.
Playing CD-R and CD-RW
This unit can play CD-DA (digital audio) and Video CD
format audio CD-R and CD-RW that have been finalized upon
completion of recording.
It may not be able to play some CD-R or CD-RW due to the
condition of the recording.
Note
≥The producer of the material can control how these discs are
played. This means that you may not be able to control play of a
disc with some operations described in these operating
instructions. Read the disc’s instructions carefully.
Disc
type
Logo Regulation Indication used
in instructions
DVD-
RAM
[4.7 GB / 9.4 GB,
5q(12 cm)]
[2.8 GB 3q(8 cm)]
[RAM]
DVD-
R
4.7 GB for
General Ver.2.0
[DVD-R]
Disc
type
Logo Video system Indication used
in instructions
DVD-
Video
PAL / NTSC [DVD-V]
Audio
CD
–[CD]
Video
CD
PAL / NTSC [VCD]
2
ALL
34
2
Discs
DVD-Video
DVD-R
DVD-RAM
Audio
CDs
Video
CDs
E‑Text1.fm8ページ２００１年９月６日 木曜日 午後４時１３分

9
Discs (continued)
Discs that cannot be played
≥DVD-Video with a region number other than the number for this
unit or “All”
≥Some DVD-R
≥DVD-RAM (2.6 GB/5.2 GB)
≥DVD-ROM
≥DVD-RW
≥DVD-Audio
≥iRW
≥CD-ROM
≥CDV
≥CD-G
≥CVD
≥SVCD
≥SACD
≥MV-Disc
≥PD
≥Photo CD
≥Divx Video Disc, etc.Discs
≥Play of non-standard Video CDs and Super Video CDs is not
guaranteed.
DVD-R
You can play DVD-R on compatible DVD players by finalizing
[the process that allows recordings on DVD-R to be played on
compatible DVD players, (page 45)] them on this unit,
effectively making them into DVD-Video.
ªBefore finalizing
You can record onto the available space on the disc and perform
editing functions, such as giving titles to discs and programs and
erasing programmes.
You cannot record to or edit DVD-R with this unit if it was recorded
with another unit, whether it is finalized or not.
You cannot record over parts that have been recorded.
Erasing programmes will not increase the discís available time.
ªAfter finalizing
The video and audio is recorded according to the DVD-Video
specifications, and your very own DVD-Video is created.
≥The titles you entered with this unit appear as menus.
≥Programmes longer than 5 minutes are divided into five-minute
chapters.
≥These DVD-R can no longer be recorded on or edited.
≥These DVD-R can be played on other DVD players, but this is not
guaranteed.
Play may not be possible due to the player you are using, the
DVD-R, or the condition of the recording. Use this unit to play the
disc if the player is unable.
For your reference
≥It takes about 30 seconds for the unit to complete recording
management information after recording finishes.
≥To record on DVD-R, this unit optimizes the disc for each
recording. Optimizing is carried out when you start recording after
inserting the disc or turning the unit on. Recording may become
impossible after the disc is optimized more than 50 times.
≥The first 30 seconds of a programme may not be recorded if you
make successive timer recordings.
≥The video is recorded in a 4:3 aspect irrespective of the video
signal input. Use the television’s screen modes to change the
screen size for play.
≥Some broadcasts carry signals that allow you to make one copy,
but you cannot record these broadcast with DVD-R. Use
DVD-RAM to record these kinds of broadcast.
≥Play may be impossible in some cases due the condition of the
recording.
≥We recommend using DVD-R manufactured by Panasonic as
they have been tested to be compatible with this unit.
≥You cannot change audio type if a DVD-R is in the unit. Select
the audio type (M1 or M2) before recording by going to “Bilingual
Selection for DVD-R” in the “Sound” menu.
For details about the kind of audio recorded when using DVD-R
and recording from DV equipment, see page 39.
Audio format logos
Dolby Digital (pages 70 and 87)
This unit can play Dolby Digital in stereo
(2 channels). Connect an amplifier with a built-in
Dolby Digital decoder to enjoy surround sound.
DTS Digital Surround (pages 70 and 87)
Connect this unit to equipment that has a DTS
decoder to enjoy DVDs with this mark.
Types of disc for the type of connected
TV
When you use the discs recorded either PAL or NTSC, refer to this
table.
*1If you select “NTSC” in “NTSC Signal Output” (page 77), the
picture may be clearer.
*2If you select “PAL 60” in “NTSC Signal Output” (page 77), the
picture may be clearer.
If your television is not equipped to handle PAL 525/60 signals
the picture will not be shown correctly.
Discs and accessories
≥DVD-RAM
You can also record signals which allow you to make one copy,
onto these discs.
9.4-GB, double-sided, type 4 cartridge:
LM-AD240E
4.7-GB, single-sided, type 2 cartridge:
LM-AB120E
(set of 3, LM-AB120E3)
4.7-GB, single-sided, non-cartridge:
LM-AF120E
(set of 3, LM-AF120Q3)
(For Hong Kong Special Administrative Region of China)
≥DVD-R
4.7-GB, single-sided, non-cartridge:
LM-RF120E
≥DVD-RAM/PD Disc cleaner:
FLF-K200DCA1
≥DVD-RAM/PD Lens cleaner:
FLF-K123LCA1
Visit Panasonic’s homepage for more information about DVDs.
http://www.matsushita-europe.com/ (For the United Kingdom)
TV type Disc Yes/No
Multi-
system TV
PAL Yes
NTSC Yes
NTSC TV
PAL No
NTSC Yes*1
PAL TV
PAL Yes
NTSC Yes*2
E‑Text1.fm9ページ２００１年９月６日 木曜日 午後４時１３分

10
Setting the remote control to operate your TV
Television operation
You can control televisions by changing the remote control code.
Preparation
≥Turn on the television.
≥Switch [DVD, TV] to “TV”.
1Refer to the chart below for the code for your television.
2Press and hold [TV, Í] and enter the two-digit code with the numeric
buttons.
≥For example: 01, press [0] )[1].
≥After entering the code, test the remote control by turning on the television and changing
channels.
Note
≥If there is more than one code, repeat the procedure until you find the code that allows correct
operation.
≥Repeat this procedure after you change the batteries.
≥If your television brand is not listed or if the code listed for your television does not allow control
of your television, this remote is not compatible with your television.
List of TVs Compatible with the unit’s Remote Control
Operation
These operating instructions describe operations mainly using the remote control. If the name of
the button is the same, the operation described can also be performed with the main unit.
The displays shown in these instructions are examples only. Actual displays depends on the disc
being played.
Operating other Panasonic DVD equipment with the remote
control
By changing the remote control code, you can operate other DVD recorders and players
manufactured by Panasonic.
Most of the DVD recorders and players manufactured by Panasonic use the same system for
their remote controls, so if you operate them in the same place, the controls can be confused by
the different pieces of equipment. Use the following procedure to change the remote control code
to solve this problem.
≥Use “1”, the factory set code, under normal circumstances.
Preparation
Switch [DVD, TV] to “DVD”.
Press [Í] and the numeric buttons corresponding to the code you want to set,
[1], [2], or [3], at the same time.
Note
≥Be sure to set the same remote control code on the main unit as you did for
the remote control itself (page 80, Setting s—Remote).
≥The display on the right appears on the unit’s display if its code and the
remote control’s code are different. Change the remote control’s code to suit
the unit.
≥The display disappears after about 5 seconds.
Brand:
Panasonic
AIWA
AKAI
BLAUPUNKT
BRANDT
BUSH
CURTIS
DESMET
DUAL
ELEMIS
FERGUSON
GOLDSTAR/LG
GOODMANS
GRUNDIG
HITACHI
INNO HIT
IRRADIO
ITT
JVC
LOEWE
METZ
MITSUBISHI
MIVAR
NEC
Code
01, 02, 03, 04
35
27, 30
09
10, 15
05, 06
31
05, 31, 33
05, 06
31
10
31
05, 06, 31
09
22, 23, 31, 40, 41, 42
34
30
25
17, 39
07
28, 31
06, 19, 20
24
36
Brand:
NOKIA
NORDMENDE
ORION
PHILIPS
PHONOLA
PIONEER
PYE
RADIOLA
SABA
SALORA
SAMSUNG
SANSUI
SANYO
SBR
SCHNEIDER
SELECO
SHARP
SIEMENS
SINUDYNE
SONY
TELEFUNKEN
THOMSON
TOSHIBA
WHITE WESTINGHOUSE
Code
25, 26, 27
10
37
05, 06
31, 33
38
05, 06
05, 06
10
26
31, 32
05, 31, 33
21
06
05, 06, 29, 30, 31
06, 25
18
09
05, 06, 33
08
10, 11, 12, 13, 14
10, 15
16
05, 06
Operation:
On and off:
Video input mode:
Channels:
Volume:
Button
[TV, Í]
[TV, TV/AV]
[TV, W, X]
[TV, VOL, i, j]
Operation:
Numeric:
TV aspect:
TV/Teletext mode:
Teletext:
Button
[0-9, ]
[TV ASPECT]
[TV/TEXT]
Colour buttons
/
TV
TV/AV
PROG / CHECK
TOP WINDOW
TV/TEXT
STOP
SV/V+
REC
TIME SLIP
AV LINK
SETUP
AUDIO
REC MODE CANCEL
INPUT
SELECT
MANUAL
SKIP
LAST
MARKER
DIRECT
TV REC
TIMER
REC
123
456
789
0
PAUSE PLAY
STATUS
RETURN
VOL
OPEN/CLOSE
T
C
E
R
I
D
R
O
T
A
G
I
V
A
N
T
O
P
M
E
N
U
M
E
N
U
D
I
S
P
L
A
Y
T
S
I
L
Y
A
L
P
ENTER
TVDVD
TV ASPECT
FRAME
SKIP SLOW/SEARCH
Á
2
/
TV
TV/AV
PROG / CHECK
TOP WINDOW
TV/TEXT
STOP
SV/V+
REC
TIME SLIP
AV LINK
SETUP
AUDIO
REC MODE CANCEL
INPUT
SELECT
MANUAL
SKIP
LAST
MARKER
DIRECT
TV REC
TIMER
REC
123
456
789
0
PAUSE PLAY
STATUS
RETURN
VOL
OPEN/CLOSE
T
C
E
R
I
D
R
O
T
A
G
I
V
A
N
T
O
P
M
E
N
U
M
E
N
U
D
I
S
P
L
A
Y
T
S
I
L
Y
A
L
P
ENTER
TVDVD
TV ASPECT
FRAME
SKIP SLOW/SEARCH
Á
/
The unit’s remote control code
E‑Text1.fm10ページ２００１年９月６日 木曜日 午後４時１３分

11
Connections (with Scart leads)
Follow the step-by-step guide below.
Hints:
≥For the United Kingdom:
Q Link offers a range of convenient functions. For example,
downloading of the tuning positions of all available television
stations into your unit’s memory if you connect the unit to your
television with a fully wired 21-pin Scart cable (not supplied).
Features similar to Q Link have different names and may not
work the same.
°1[Q Link] is a registered trademark of Panasonic.
°2[DATA LOGIC] is a registered trademark of Metz.
°3[Easy Link] is a registered trademark of Philips.
°4[Megalogic] is a registered trademark of Grundig.
°5[SMARTLINK] is a registered trademark of Sony.
For details, refer to your television’s operating instructions or
consult your dealer.
≥Unlike in most commercially available 21-pin Scart cables, all 21
pins of one plug on a fully wired 21-pin Scart cable are connected
to the matching pins on the other end of the cable.
Reference:
≥If the TV set is equipped with a 21-pin scart socket that features
Y/C signal separation, set the “AV1 Output”to “S-Video”(see
page 77) so that you can play back with high picture quality and
use a fully-wired 21-pin Scart lead (not supplied) to connect the
DVD Recorder to the TV.
1
2
3
4
5
6
6
6
Aerial
(not supplied)
Aerial Input
socket
TV [with or without Q link function]
(not supplied)
To AC Mains socket
AV2 socket
AV1 socket
RF lead
(supplied)
Necessary for
TV with Q Link
Necessary for Connecting
a Satellite Receiver
21-pin Scart socket (DVD)
21-pin Scart socket (TV)
To AC Mains socket
Satellite Receiver (not supplied)
AC Mains lead (supplied)
AC Input socket
AV2 21-pin Scart socket
AV1 21-pin Scart socket
RF Output socket
RF Input socket
Note:
21-pin Scart leads are not supplied.
1Connect the aerial to the RF Input socket of the DVD
Recorder.
2Connect the RF lead from the RF Output socket of the DVD
Recorder to the TV aerial input socket.
3Connect the AV1 21-pin scart socket to TV scart socket
(optional).
≥This is necessary for Download from TV with Q Link function.
4Connect the AV2 21-pin scart socket to the DVD Recorder
Scart Socket on your Satellite Receiver/Digital Sat receiver.
If you are not connecting a Satellite Receiver, skip this step.
5Connect the TV scart socket of your Satellite Receiver to the
AV2 scart socket of your TV.
If you are not connecting a Satellite Receiver, skip this step.
6Plug the TV, DVD Recorder and Satellite Receiver into the
mains as shown at top of the page.
RF-IN
RF-OUT
OPTICAL
AC IN
T
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
RF-IN
RF-OUT
AV2 [DECODER/EXT]
AV1 [TV]
S VIDEO
AV 4
IN
VIDEO
L
R
AUDIO
OUT
This unit
RF-IN
RF-OUT
OPTICAL
AC IN
T
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
RF-IN
RF-OUT
AV2 [DECODER/EXT]
AV1 [TV]
S VIDEO
AV 4
IN
VIDEO
L
R
AUDIO
OUT
This unit TV
AV1 [TV]
OPTICAL
AC IN
T
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
RF-IN
RF-OUT
AV2 [DECODER/EXT]
AV1 [TV]
S VIDEO
AV 4
IN
VIDEO
L
R
AUDIO
OUT
This unit TV
AV2 [DECODER/EXT]
OPTICAL
AC IN
T
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
RF-IN
RF-OUT
AV2 [DECODER/EXT]
AV1 [TV]
S VIDEO
AV 4
IN
VIDEO
L
R
AUDIO
OUT
This unit
Satellite Receiver
Satellite Receiver TV
E‑Text1.fm11ページ２００１年９月６日 木曜日 午後４時１３分

12
Connections (with S-Video cable)
Connections and preparations for a TV with S-Video socket.
The conventional video sockets of DVD Recorder’s output (input) a combination of the luminance signal (Y) and colour signal (C) which are
recorded on the disc. The S (Separate)-Video socket allows separate transmission of signals in order to obtain clearer pictures.
The connection with S-Video Cable can also be used for playback of any disc. The “S”in the “S-Video socket”stands for “SEPARATED Y/C”
not for “S-VHS”.
After completing the above connections, proceed to the Auto Setup page (Page 14).
Note:
The pictures output by this DVD Recorder can only be viewed when connected to a TV by either the Scart lead or S-Video socket method.
Aerial
(not supplied)
Aerial Input
socket
Audio/video
Input socket
TV with S-Video
Input socket
(not supplied)
To AC Mains
socket
S-Video Input
socket
Audio/Video cables
(supplied)
RF lead
(supplied)
S-Video cable
(not supplied)
RF Output
socket
RF Input socket
S-Video Output socket
Audio/Video
Output socket
AC Mains lead (supplied)
AC Input
socket
E‑Text1.fm12ページ２００１年９月６日 木曜日 午後４時１３分

13
For the United Kingdom:
If you do not have a Q Link TV, ignore this page and go to page 14.
The Preset Download function can automatcally copy the tuning position of all
available TV station into the DVD Recorder’s memory when you connect the DVD
Recorder using a fully-wired 21-pin Scart lead to a equipped with the Q Link function.
To Setup this DVD Recorder with a brand-new Q Link
TV
Perform the following operation steps exactly as described to ensure that the Preset
Download function works correctly.
≥First of all, make sure that the DVD Recorder is switched off.
1Switch the TV on. The TV automatically starts to tune all available
TV stations and to adjust the clock. (This is called Auto Setup
function.)
≥When the TV has finished its own auto setup, the DVD Recorder is
automatically switched on, and the downloading of the setup data from the TV
to the DVD Recoder starts.
2Switch [DVD, TV] to “DVD”.
3When Download has finished, the screen for the Owner ID setting
menu appears.
Use the joystick [1
11
1] and the Numeric buttons to enter a 4-digit PIN
number.
≥Make sure that you will remember the PIN number (make a note of it).
4Press [ENTER] and use the joystick [4
44
4]. The cursor moves to
“Name”.
5Use the joystick [1
11
1].
6Use the joystick [3
33
3, 4
44
4, 2
22
2, 1
11
1] to select a letter and then press
[ENTER].
Repeat this to enter the name.
7Enter “House No.”and “Postcode”in the same way.
8Press [RETURN] to make the Owner ID setting disappear.
Reference:
≥If you use a Panasonic Q Link TV and perform the operation step 1 above, starting
the downloading of the setup data will automatically display the “Download”
indication. However, in case of a TV of another make, the “Download”indication
may not appear. In this case, select the AV input on your TV if you want to see the
“Download”indication.
Hints:
≥The explanations in this book refer to Panasonic Q Link TV and DVD Recorder,
however they may also apply to other makes of TV and DVD Recorder with similar
functions to Q Link. (page 11)
≥If you accidentally switch on the DVD Recorder before the TV, downloading of the
setup data from the TV may not be performed correctly. In this case, follow the
steps below.
1) Wait until the Auto Setup is complete on both the TV and the DVD Recorder.
2) Press [SET UP] to display the “Settings”menu on the TV screen.
3) Use the joystick [3, 4, 2, 1] to select “Tuning”and then “Download”.
4) Press [ENTER] and select “Yes”. Downloading of the setup data from the TV to
the DVD Recorder starts.
5) When the programme position and the current time appear in the DVD Recorder
display, downloading is complete.
TV
TV/AV
PROG / CHECK
TOP WINDOW
TV/TEXT
STOP
SV/V+
REC
TIME SLIP
AV LINK
SETUP
AUDIO
REC MODE CANCEL
INPUT
SELECT
MANUAL
SKIP
LAST
MARKER
DIRECT
TV REC
TIMER
REC
123
456
789
0
PAUSE PLAY
STATUS
RETURN
VOL
OPEN/CLOSE
T
C
E
R
I
D
R
O
T
A
G
I
V
A
N
T
O
P
M
E
N
U
M
E
N
U
D
I
S
P
L
A
Y
T
S
I
L
Y
A
L
P
ENTER
TVDVD
TV ASPECT
FRAME
SKIP SLOW/SEARCH
Á
2
3
3·4·
5·6
8
/
Auto Setup (with Q Link Functions)
FINISH
START
E‑Text1.fm13ページ２００１年９月６日 木曜日 午後４時１３分

14
TV
TV/AV
PROG / CHECK
TOP WINDOW
TV/TEXT
STOP
SV/V+
REC
TIME SLIP
AV LINK
SETUP
AUDIO
REC MODE CANCEL
INPUT
SELECT
MANUAL
SKIP
LAST
MARKER
DIRECT
TV REC
TIMER
REC
123
456
789
0
PAUSE PLAY
STATUS
RETURN
VOL
OPEN/CLOSE
T
C
E
R
I
D
R
O
T
A
G
I
V
A
N
T
O
P
M
E
N
U
M
E
N
U
D
I
S
P
L
A
Y
T
S
I
L
Y
A
L
P
ENTER
TVDVD
TV ASPECT
FRAME
SKIP SLOW/SEARCH
Á
3
4
/
Auto Setup automatically tunes all available stations and sets the DVD Recorder’s clock to the
current date and time.
1Switch the TV on.
2Select the AV input on your TV.
3Switch the [DVD, TV] to “DVD”.
4Press [Í
ÍÍ
Í] to switch the DVD Recorder on.
≥Auto Setup starts. This takes about 5 minutes.
5To setup the Owner ID, repeat the steps 3-8 on the previous page.
To Set Up this VCR with an existing Q Link TV
1Switch the TV on.
2Select the AV input on your TV.
3Switch the [DVD, TV] to “DVD”.
4Press [Í
ÍÍ
Í] to switch the DVD Recorder on. Downloading of the setup data
starts automatically.
5To setup the Owner ID, repeat the steps 3-8 on the previous page.
TV
TV/AV
PROG / CHECK
TOP WINDOW
TV/TEXT
STOP
SV/V+
REC
TIME SLIP
AV LINK
SETUP
AUDIO
REC MODE CANCEL
INPUT
SELECT
MANUAL
SKIP
LAST
MARKER
DIRECT
TV REC
TIMER
REC
123
456
789
0
PAUSE PLAY
STATUS
RETURN
VOL
OPEN/CLOSE
T
C
E
R
I
D
R
O
T
A
G
I
V
A
N
T
O
P
M
E
N
U
M
E
N
U
D
I
S
P
L
A
Y
T
S
I
L
Y
A
L
P
ENTER
TVDVD
TV ASPECT
FRAME
SKIP SLOW/SEARCH
Á
3
4
/
Auto Setup (without Q Link Functions)
Auto Setup (with Q Link Functions) (continued)
E‑Text1.fm14ページ２００１年９月６日 木曜日 午後４時１３分

15
Video Plus+ Codes for Satellite Receivers/Cable TV
For the United Kingdom:
This unit is not designed to control (switch on or change channel) your satellite receiver or Cable
TV box, however, it can be taught to recognise Video Plus+ Codes for Satellite stations. The
Satellite receiver or Cable TV box must be switched on and the correct station selected. Some
receivers have their own timer facility for this purpose. Please refer to your Satellite Receiver/
Cable TV box instructions for use of such timer facilities.
For your unit to recognise the Video Plus+ Codes for each satellite station, you must teach your
unit which channel or AV input to record from for the first time. Otherwise when setting a Video
Plus+ recording, the [ss] symbol will appear in the channel position indicating that the unit does
not know which channel position to set. Once you have set the channel/AV input once the unit
will remember it whenever you use a Video Plus+ Code for the station again.
Preparation
≥Turn on the television.
≥Switch [DVD, TV] to “TV”.
1Turn on the TV and the unit. Select video playback channel on the TV.
2Press the SV/V+ button.
3Enter a Video Plus+ Code from a Satellite TV Guide
for a satellite channel, e.g. Sky 1 using the Numeric
buttons. If you make a mistake, use the joystick [2
22
2]
to go back.
4Press [ENTER]. [ss
ssss
ss] will appear instead of a
channel number/AV input.
5Use the joystick [3, 4, 2, 1] to select the channel
or AV input that is to be used for recording from the
satellite channel.
6Press [ENTER] to memorise the setting. The unit
will now automatically set the programme position
or AV input correctly when a Video Plus+ recording
is set for this satellite station in the future.
7Use the joystick [3
33
3] to select the programme that
you have just set. Now press [CANCEL] to delete it
from the timer recording list. It is no longer needed.
8Repeat steps 2s
ss
s7 above until you have set and
deleted dummy timer recordings for each of the satellite stations that you
will make Video Plus+ recordings from.
9Press [RETURN] when you have finished.
TV
TV/AV
PROG / CHECK
TOP WINDOW
TV/TEXT
STOP
SV/V+
REC
TIME SLIP
AV LINK
SETUP
AUDIO
REC MODE CANCEL
INPUT
SELECT
MANUAL
SKIP
LAST
MARKER
DIRECT
TV REC
TIMER
REC
123
456
789
0
PAUSE PLAY
STATUS
RETURN
VOL
OPEN/CLOSE
T
C
E
R
I
D
R
O
T
A
G
I
V
A
N
T
O
P
M
E
N
U
M
E
N
U
D
I
S
P
L
A
Y
T
S
I
L
Y
A
L
P
ENTER
TVDVD
TV ASPECT
FRAME
SKIP SLOW/SEARCH
Á
2
/
3·4·
5·6·
7
7
9
3
E‑Text1.fm15ページ２００１年９月６日 木曜日 午後４時１３分

16
The aspect ratio is factory set to 4:3 for a regular television. You do not have to change this
setting if you have a regular 4:3 aspect television.
Preparation
≥Turn on the television and select the appropriate video input to suit the connections to this unit.
≥Switch [DVD, TV] to “DVD”.
1Press [Í
ÍÍ
Í] to turn this unit on.
2Press [SET UP] to show the menus.
3Use the joystick [2, 1] to select the “Connection”tab.
4Use the joystick [3, 4] to select “TV Aspect”and press [ENTER].
5Use the joystick [3, 4] to select the TV aspect and press [ENTER].
≥4:3 (factory setting)
≥16:9
ªTo return to the previous screen
Press [RETURN].
For your reference
Apart from “TV Aspect”, other settings also affect how video appears on your television. Check
the following if video doesn’t appear correctly on your television.
≥“Connection”—“4:3 TV Settings for DVD-RAM”or “4:3 TV Settings for DVD-Video”(page 77).
≥The video setting on the disc. How video appears is often specified by the disc itself.
≥The video settings on your television.
TV
TV/AV
PROG / CHECK
TOP WINDOW
TV/TEXT
STOP
SV/V+
REC
TIME SLIP
AV LINK
SETUP
AUDIO
REC MODE CANCEL
INPUT
SELECT
MANUAL
SKIP
LAST
MARKER
DIRECT
TV REC
TIMER
REC
123
456
789
0
PAUSE PLAY
STATUS
RETURN
VOL
OPEN/CLOSE
T
C
E
R
I
D
R
O
T
A
G
I
V
A
N
T
O
P
M
E
N
U
M
E
N
U
D
I
S
P
L
A
Y
T
S
I
L
Y
A
L
P
ENTER
TVDVD
TV ASPECT
FRAME
SKIP SLOW/SEARCH
Á
1
3·4·
5
2
/
Selecting TV screen type
E‑Text1.fm16ページ２００１年９月６日 木曜日 午後４時１３分

17
[RAM] [DVD-R] [DVD-V] [CD] [VCD]
Preparation
Switch [DVD, TV] to “DVD”.
1Press [Í
ÍÍ
Í] to turn the unit on.
2Press [<, OPEN/CLOSE] to open the tray and insert a disc.
≥Insert inside the tray’s guides.
≥Insert one disc only.
3Press [1, PLAY].
≥The disc tray closes and play begins.
(The unit takes some time to read the disc before play starts.)
ªTo stop play [A]
Press [∫, STOP] (page 18, Starting play from where you stopped it).
≥A screen similar to the illustrated may appear when you stop play. Press
[∫, STOP] again and you can use this unit’s tuner to watch television.
This screen is also shown when you are playing CDs.
ªTo pause play
Press [;, PAUSE].
Press again to restart playing.
ªAuto power-off
The unit switches to the standby mode after about 2 or 6 hours in the stop mode if you set the
time (page 75, Settings —Off Timer).
ªWith non-cartridge discs
(1) Insert label-up. (With double-sided discs, load so the label for the side you want to play is
facing up.)
(2) Guide for 5q(12 cm) disc
(3) Guide for 3q(8 cm) disc
(1)
(2) (3)
A
∫;
123
TV
TV/AV
PROG / CHECK
TOP WINDOW
TV/TEXT
STOP
SV/V+
REC
TIME SLIP
AV LINK
SETUP
AUDIO
REC MODE CANCEL
INPUT
SELECT
MANUAL
SKIP
LAST
MARKER
DIRECT
TV REC
TIMER
REC
123
456
789
0
PAUSE PLAY
STATUS
RETURN
VOL
OPEN/CLOSE
T
C
E
R
I
D
R
O
T
A
G
I
V
A
N
T
O
P
M
E
N
U
M
E
N
U
D
I
S
P
L
A
Y
T
S
I
L
Y
A
L
P
ENTER
TVDVD
TV ASPECT
FRAME
SKIP SLOW/SEARCH
Á
2
3
1
/
Playing discs
e.g.:DVD-RAM
Insert label-up with the arrow facing in.
E‑Text1.fm17ページ２００１年９月６日 木曜日 午後４時１３分

18
When a menu screen appears on the television
[DVD-V] [VCD]
Operate menus with the following operations. Actual operations depend on the disc.
Press the numeric buttons to select an item, or move the joystick [3, 4, 2, 1] to select
an item and press [ENTER].
≥You can return to menus after you start play by pressing [TOP MENU] or [MENU] (DVD-Video),
or [RETURN] (Video CD).
Note
≥The disc continues to rotate while the menu is displayed even after you finish playing an item.
Press [∫, STOP] when you finish to preserve the unit’s motor and your television screen.
≥Volume may be lower when playing DVD-Video than when playing other discs or during
television broadcasts.
If you turn the volume up on the television or amplifier, ensure you reduce the volume again
before playing other sources or returning to the television so that a sudden increase in output
does not occur.
For your reference
≥If “”appears on the television
The operation is prohibited by the unit or disc.
≥If a disc is loaded, the unit will come on and play will start when you press [1, PLAY].
≥If you play a disc that includes parts without video, the unit may display the video from the disc
you were playing immediately before that disc.
Starting play from where you stopped it (Resume Function)
[RAM] [DVD-R] [DVD-V] [CD] [VCD]
1During play
Press [∫, STOP].
≥The unit remembers the position.
2Press [1, PLAY] while the indicated part of the center
circle appears on the display.
≥Play starts from where you stopped it.
ªTo cancel the resume function
Press [∫, STOP] while the indicated part of the center circle appears on the display.
(The position is also cleared when you turn the unit off.)
ªTo start play from a memorized position after turning the unit off
Press [LAST MARKER] during play.
(The message “Position Memorized”appears on the television.)
Now when you press [1, PLAY] after switching the unit to standby and back on, play starts from
the memorized position.
For your reference
[DVD-R] [DVD-V] [CD] [VCD]
≥The position memorized when you press [∫, STOP] or [LAST MARKER] is cleared when you
open the disc tray.
[RAM]
≥The last marker is written to the disc and remains intact until you mark a different position.
You cannot mark positions if the disc is write-protected with DISC INFORMATION (page 41) or
with the write protect tab (page 90). Release the protection before marking position.
≥If you press [∫, STOP] before switching the unit to standby after pressing [LAST MARKER] to
memorize a position, play will resume from the position you pressed [∫, STOP] when you press
[1, PLAY].
≥The position memorized when you press [∫, STOP] is cleared when you switch the unit to
standby or if the unit switches to standby automatically (page 75, Setting s—Off Timer).
TV
TV/AV
PROG / CHECK
TOP WINDOW
TV/TEXT
STOP
SV/V+
REC
TIME SLIP
AV LINK
SETUP
AUDIO
REC MODE CANCEL
INPUT
SELECT
MANUAL
SKIP
LAST
MARKER
DIRECT
TV REC
TIMER
REC
123
456
789
0
PAUSE PLAY
STATUS
RETURN
VOL
OPEN/CLOSE
T
C
E
R
I
D
R
O
T
A
G
I
V
A
N
T
O
P
M
E
N
U
M
E
N
U
D
I
S
P
L
A
Y
T
S
I
L
Y
A
L
P
ENTER
TVDVD
TV ASPECT
FRAME
SKIP SLOW/SEARCH
Á
2
1
/
Playing discs (continued)
E‑Text1.fm18ページ２００１年９月６日 木曜日 午後４時１３分

19
TV
TV/AV
PROG / CHECK
TOP WINDOW
TV/TEXT
STOP
SV/V+
REC
TIME SLIP
AV LINK
SETUP
AUDIO
REC MODE CANCEL
INPUT
SELECT
MANUAL
SKIP
LAST
MARKER
DIRECT
TV REC
TIMER
REC
123
456
789
0
PAUSE PLAY
STATUS
RETURN
VOL
OPEN/CLOSE
T
C
E
R
I
D
R
O
T
A
G
I
V
A
N
T
O
P
M
E
N
U
M
E
N
U
D
I
S
P
L
A
Y
T
S
I
L
Y
A
L
P
ENTER
TVDVD
TV ASPECT
FRAME
SKIP SLOW/SEARCH
Á
/
••••
L R
DVD-RAM
Playing discs (continued)
Fast forward and rewind—SEARCH
[RAM] [DVD-R] [DVD-V] [CD] [VCD]
During play
Press [6, SLOW/SEARCH] or [5, SLOW/SEARCH].
[6]: backward
[5]: forward
≥There are five search speeds. Each press increases the search speed.
≥The search speed is maintained when you release the button.
≥Press [1, PLAY] to restart play.
≥You will hear sound at speed one (only forward) when playing DVD-RAM, DVD-R, DVD-Video,
and Video CDs. You can turn this sound off if you want to (page 76, Sound—Sound during
Search).
≥Sound is not heard during follow-on play and simultaneous recording and play.
Slow-motion play
[RAM] [DVD-R] [DVD-V] [VCD]
While paused
Press [6, SLOW/SEARCH] or [5, SLOW/SEARCH].
[6]: backward (does not work with Video CDs)
[5]: forward
≥There are five slow-motion speeds. Each press increases the slow-motion speed.
≥The slow-motion speed is maintained when you release the button.
≥Press [1, PLAY] to restart play.
Frame-by-frame viewing
[RAM] [DVD-R] [DVD-V] [VCD]
Remote control only
While paused
Press [2;, FRAME] or [;1, FRAME].
[2;]: backward (does not work with Video CDs)
[;1]: forward
≥Each press shows the next or previous frame.
≥Press [1, PLAY] to restart play.
E‑Text1.fm19ページ２００１年９月６日 木曜日 午後４時１３分

20
Skipping
[RAM] [DVD-R] [DVD-V] [CD] [VCD]
You can skip to the beginning of tracks (page 88) and chapters (page 88) and restart play from
there.
On DVD-RAM and DVD-R, you can skip to the start of a programme and start play from there.
The section between the point where recording is started and the point where it is stopped is
called a “programme”.
During play or while paused
Press [:, SKIP] or [9, SKIP].
[:]: backward
[9]: forward
Each press increases the number of skips.
For your reference
≥After skipping, the unit returns to the previous state, play or pause.
≥Press [1, PLAY] to restart play if it was paused.
≥Pressing [:] or [9] while a DVD menu is being shown or while the playback control
feature on Video CDs (page 88) is working may take you to a menu screen.
≥You can also mark positions to skip to (page 68).
(1) Play position
(2) Twice
(3) Once
(4) Chapter/track
[:][9][:][9]
(1)
(2) (2)
(3) (3)
(4) (4) (4)
(1) (2)
(3) (3)
(4) (4)
(5)
(
6 )(
7 )(
8 )
TV
TV/AV
PROG / CHECK
TOP WINDOW
TV/TEXT
STOP
SV/V+
REC
TIME SLIP
AV LINK
SETUP
AUDIO
REC MODE CANCEL
INPUT
SELECT
MANUAL
SKIP
LAST
MARKER
DIRECT
TV REC
TIMER
REC
123
456
789
0
PAUSE PLAY
STATUS
RETURN
VOL
OPEN/CLOSE
T
C
E
R
I
D
R
O
T
A
G
I
V
A
N
T
O
P
M
E
N
U
M
E
N
U
D
I
S
P
L
A
Y
T
S
I
L
Y
A
L
P
ENTER
TVDVD
TV ASPECT
FRAME
SKIP SLOW/SEARCH
Á
/
Playing discs (continued)
(1) Play position
(2) Marker
(3) Twice
(4) Once
(5) Three times
(6) The programme before
(7) Current programme
(8) The programme after
Starting play from a selected programme, title, chapter or
track
[RAM] [DVD-R] [DVD-V] [CD] [VCD]
Remote control only
Preparation
Switch [DVD, TV] to “DVD”.
During play or while stopped
Press the numeric buttons to select the item.
(page 6)
≥This works only when stopped with some discs (the screen saver is on the television).
E‑Text1.fm20ページ２００１年９月６日 木曜日 午後４時１３分