Panasonic WJ-ND400K Manual

123456789
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
The model number is abbreviated in some descriptions in this manual.
Setup Instructions
Network Disk Recorder
Model No. WJ-ND400K
WJ-ND400K/G

2
Contents
Preface ........................................................................ 3
About the user manuals ........................................... 3
System requirements for a PC ................................. 3
Trademarks and registered trademarks ................... 4
Abbreviations ........................................................... 4
Restrictions when operating MPEG-4 images ............ 5
Operation flow............................................................. 7
Setup menu and its items ........................................ 8
Network settings ....................................................... 11
Network settings of the recorder............................ 11
Network settings of a PC ....................................... 13
About the operation window ..................................... 15
Display/Close the operation window...................... 15
Major operating controls and their functions ............ 17
Top page................................................................. 17
[Control] button ...................................................... 18
[Cam. select] button ............................................... 19
[Setup] button......................................................... 20
Status display area................................................. 21
Playback point operation area ............................... 22
[HDD] tab................................................................ 22
[CAM] tab ............................................................... 24
Basic operation ...................................................... 25
Quick settings............................................................ 26
Setup...................................................................... 26
Language/Time & date ........................................ 26
Network settings ................................................. 27
Camera registration............................................. 28
Program setup..................................................... 30
Basic settings............................................................ 31
Basic....................................................................... 31
Time & date ............................................................ 32
Emergency recording ................................................ 34
Event ......................................................................... 38
Basic....................................................................... 39
Terminal alarm ........................................................ 40
Site alarm ............................................................... 41
Command alarm..................................................... 42
Schedule recording ................................................... 43
Program.................................................................. 43
Time table............................................................... 47
Special days........................................................... 48
Camera...................................................................... 49
NW camera............................................................. 49
Group ..................................................................... 54
Sequence ............................................................... 55
Server ........................................................................ 57
NTP ........................................................................ 57
FTP ......................................................................... 58
Mail......................................................................... 60
Proxy ...................................................................... 62
Network ..................................................................... 63
Basic....................................................................... 63
DDNS ..................................................................... 67
SNMP ..................................................................... 68
Panasonic alarm protocol ...................................... 69
User management..................................................... 70
Basic....................................................................... 70
Administrator.......................................................... 71
User........................................................................ 72
Edit the user settings........................................... 73
Delete the user settings....................................... 73
Host........................................................................ 74
Edit the host settings .......................................... 75
Delete the host settings ...................................... 75
User level................................................................ 76
Maintenance.............................................................. 78
Product information................................................ 78
Disk information ..................................................... 79
Network information............................................... 82
Disk ........................................................................ 83
Settings management ............................................ 85
Disk config................................................................. 86
HDD management.................................................. 86
Disk partition information ....................................... 87
Disk format ................................................................ 89
Format .................................................................... 89
Format the pre-event recording area ..................... 91
Notification by e-mail ................................................ 93
Alarm mail............................................................... 93
Warning mail........................................................... 93
Troubleshooting......................................................... 96
Message displayed on the information bar.......... 101
Glossary .................................................................. 103
Index........................................................................ 107

3
Preface
The network disk recorder (WJ-ND400K, WJ-ND400K/G) is designed for use within a surveillance system, and
record images/audio from the connected network cameras on the hard disk drives. Up to 64 cameras can be con-
nected via a network.
It is possible to perform the settings or operate the recorder using a web browser installed on a PC connected to a
network. (It is necessary to configure the network settings of a PC to operate this product using a PC.)
Up to 16 PCs (web browsers) can access the recorder concurrently and it is possible to perform the settings and
operate the recorder. (The maximum number of PCs that can access the recorder varies depending on the net-
work.)
About the user manuals
There are 4 manuals provided for the WJ-ND400K, WJ-ND400K/G as follows.
Installation Guide: Contains descriptions of how to install/connect this product, and descrip-
tions of how to operate this product with the buttons on the front panel.
Setup Instructions (PDF) (this book): Contains descriptions of how to configure the required settings and how to
connect to other devices.
Operating Instructions (PDF): Contains descriptions of how to operate this product with a PC.
Quick Reference Guide: Contains descriptions of how to configure the basic settings and how to use
the major functions.
Adobe®Reader®is required to read these operating instructions (PDF) on the provided CD-ROM.
When the Adobe®Reader®is not installed on the PC, download the latest Adobe®Reader®from the Adobe web
site and install it.
"WJ-ND400" or "ND400" shown in the instructions and illustrations used in these operating instructions indicate
the WJ-ND400K,WJ-ND400K/G.
Refer to "readme.txt" on the provided CD-ROM for further information about the optional dedicated software, com-
patible cameras and their versions.
The screens used in these operating instructions show the case of NTSC model.
System requirements for a PC
It is recommended to operate this unit using a PC that meets the following system requirements.
OS: Microsoft®Windows Vista®Business SP1 (32-bit)
Microsoft®Windows®XP Professional SP2, SP3*
Microsoft®Windows®XP Home Edition SP2, SP3*
OS Language: English, French, Spanish, German, Italian, Russian, Chinese
CPU: Pentium®4 3.0 GHz or faster
Memory: 1 GB or more (512 MB or more is required when using Microsoft®Windows®XP.)
Monitor: Resolution: 1 024 x 768 pixels or more
Color: 24-bit True color or better
Network interface: 10/100/1 000 Mbps Ethernet port x1
Web Browser: Windows®Internet Explorer®7.0
Microsoft®Internet Explorer®6.0 SP2, SP3*
Audio interface: Sound card (when using the audio function)

4
Other: CD-ROM drive: It is necessary to refer to the operating instructions and use the software
on the provided CD-ROM.
DirectX®9.0c or later
Adobe®Reader®: It is necessary to refer to the operating instructions on the provided
CD-ROM.
* Microsoft®Internet Explorer®6.0 SP2/SP3 is required when using Microsoft®Windows®XP Professional SP2/
SP3 or Microsoft®Windows®XP Home Edition SP2/SP3, respectively.
Important:
 • WhenusingaPCthatdoesnotmeettheaboverequirements,displayingofimagesmaybecomesloworthe
web browser may become inoperable.
 • AudiomaynotbeheardifasoundcardisnotinstalledonaPC.Audiomaybeinterrupteddependingonthe
network environment.
 • Microsoft®Windows®XP Professional x64 Edition is not supported.
Note:
 • Referto"NotesonWindowsVista®" (PDF) for further information about system requirements for a PC and pre-
cautions when using Microsoft®Windows Vista®.
Trademarks and registered trademarks
 • Adobe,Adobelogos,andAcrobatareregisteredtrademarksofAdobeSystemsIncorporatedintheU.S.and/or
other countries.
 • Microsoft,Windows,WindowsVista,InternetExplorer,ActiveXandDirectXareeitherregisteredtrademarksor
trademarks of Microsoft Corporation in the United States and other countries.
 • IntelandPentiumaretrademarksorregisteredtrademarksofIntelCorporationoritssubsidiariesintheUnited
States and other countries.
 • Othernamesofcompaniesandproductscontainedintheseoperatinginstructionsmaybetrademarksorregis-
tered trademarks of their respective owners.
Abbreviations
The following abbreviations are used in these operating instructions.
Microsoft®Windows Vista®Business SP1 (32-bit) is described as Windows Vista.
Microsoft®Windows®XP Professional SP2, SP3 and Microsoft®Windows®XP Home Edition SP2, SP3 are
described as Windows XP.

5
Restrictions when operating MPEG-4 images
There are following restrictions when "MPEG-4" is selected for the image compression method of "NW camera"
under "Camera" on the setup menu.
1. When displaying live images
(1) Black screen may be displayed for the first few seconds (*) when the following operations are performed while
displaying live images.
 • WhenMPEG-4liveimagesaredisplayed(byswitchingcamerachannel,etc.)
 • WhenMPEG-4imageisenlarged(orwhenenlargedMPEG-4imageisresizedtotheoriginalsize)
(2) It may take several seconds (*) for refresh interval of MPEG-4 image when displaying images on a 4-screen.
Example: When "3 seconds" is selected for the refresh interval on the camera, MPEG-4 image will be refreshed
in 3 seconds intervals.
2. When displaying images sequentially
When the image compression method of the camera selected for a camera channel is "MPEG-4", the respective
sequence step will be skipped.
3. When playing recorded images
(1) Displayed playback time may be fast for several seconds (*) when the following operations are performed while
playing recorded images.
 • WhenMPEG-4recordedimagesareplayed(bychangingcamerachannel,etc.)
 • WhenMPEG-4imageisenlarged(orwhenenlargedMPEG-4imageisresizedtotheoriginalsize)
(When operating to zoom in/out a paused MPEG-4 recorded image, image of several seconds later than the dis-
played image may be enlarged.)
 • Whenthe[PLAY]buttonisclickedagainwhileplayingMPEG-4image
 • Whenthefirstframeisdisplayedbyclickingthe[NEXTIMAGE]buttonduringpausing
(2) Playback may be performed in several seconds intervals (*) when the following operations are performed while
playing MPEG-4 image. Refer to the operating instructions (PDF) for how to control playback.
 • Reverseplayback
 • Fastplayback/fastreverseplayback
 • Reverseframeplayback
Example: When "3 seconds" is selected for the refresh interval on the camera, MPEG-4 image will be refreshed
in 3 seconds intervals.
(3) When two records are played sequentially, the last few frames of the former record and the first few frames of
the next record may be displayed overlapped.
(4) When playing MPEG-4 image by designating time and date, playback may start from a point several seconds
before or after the designated time and date or from the first frame of the next record.
4. When recording images
(1) Time and date displayed on the recording event list (actual start time of recordings) may not exactly indicate the
actual time of recording trigger (event occurrence time, start time of the schedule recording, etc.), and also the
recording duration may be shortened for seconds worth two times of the refresh interval set on the camera.
Example: When the set recording duration and the set refresh interval of the camera are 10 seconds and 1 sec-
ond respectively
10 - (1 x 2) = 8 (sec)
The minimum actual recording duration is 8 seconds.
(2) When pre-event recording is set to be performed, pre-event recording duration may be longer than the set dura-
tion.
Example: Depending on the size of the image data, pre-recording duration may be around 10 seconds even
when setting 5 seconds for the pre-event recording duration.

6
5. When copying images
Copying may start from a point several seconds (*) later than the designated start time when copying MPEG-4
images. To copy the desired images for sure, designate start time several seconds earlier than the time when the
desired images are recorded, and set time range for copying longer than the refresh interval set on the camera.
6. When downloading recorded images
Downloading of recorded images may start from a point several seconds (*) earlier than the designated start time.
Set time range for download longer than the refresh interval set on the camera.
7. When transmitting images recorded at an event occurrence to the FTP server
When transmitting images recorded at an event occurrence to the FTP server, image transmission duration may not
be exactly the same as the duration set for "Duration-Pre" and "Duration-Post". Set "Duration-Pre" and "Duration-
Post" longer than the refresh interval set on the camera.
8. Other
MPEG-4 images will not be attached to alarm mails.
Even when images are to be transmitted to the FTP server periodically, MPEG-4 images will not be transmitted.
* Time (seconds) differs depending on the refresh interval set on the camera (0.2 - 5 seconds). To shorten time
lag, set the refresh interval on the camera shorter. Refer to the setup instructions of the camera for information
on how to configure the refresh interval.

7
Operation flow
The operation flow of the recorder is as follows.
Install the recorder in the rack. (Refer to the installation guide.)
Go to step 2 when not installing it in the rack.
z
Connections
Rack mounting
Connect the recorder to each device. (Refer to the installation
guide.)
➜➜➜ ➜ ➜➜➜➜➜➜
x
Startup
Turn on the power of the recorder. (Refer to the installation guide.)
When using extension units, turn the power of all the extension
units before turning on the power of the recorder.
c
Install the HDD units
Install hard disk drives in the recorder. (Refer to the installation
guide.)
When unformatted hard disk drives are installed, they will auto-
matically be formatted.
According to your needs, determine the operational mode.
v
Network settings
of the recorder
Operate the buttons on the front panel of the recorder to configure
the network settings of the recorder. (Page 11)
b
Network settings of a PC
Formatting of the
hard disk drives
Network settings
of the camera
Setup
Start operation
Replacement of the
hard disk drives
Change the TCP/IP setting of the PC to conform to the settings of
the recorder. (Page 13)
Display the disk configuration menu and format the hard disk
drives. (Page 89)
Display the camera setup menu and configure the network set-
tings of the cameras. (Page 49)
Perform the required settings on the setup menu to start opera-
tion. (Page 8)
When necessary
It is possible to replace the hard disk drives without turning off the
power of the recorder. (Refer to the Installation guide.)
n
m
,
.
⁄0

8
Setup menu and its items
It is necessary to configure the settings on the setup menu in advance to use the recorder. The setup menu will be
displayed by clicking the [Setup] button.
Setup items Description Reference
page
Quick
Setup Displays the "Quick" page that contains the minimum required
settings to be configured to operate the recorder.
26
Basic
Basic Settings for the basic operations of the recorder can be con-
figured.
31
Time & date Current time and date can be set. 32
Emergency rec.
Emergency rec. Settings relating to emergency recording such as the recording
time and recording rate can be configured.
34
Event
Basic Basic settings relating to the event actions can be configured. 39
Terminal alarm Event actions to be taken at a terminal alarm occurrence can
be set.
40
Site alarm Event actions to be taken at a site alarm occurrence can be
set.
41
Command alarm Event actions to be taken at a command alarm occurrence can
be set.
42
Schedule
Time table Create timetables for each day of the week, and assign a pro-
gram to each timetable.
47
Program Up to 8 recording programs can be created. Settings relating
to recordings such as the recording rate for each camera
channel can be configured.
43
Special days Timetables to special days aside from other days of the week
can be assigned.
48
Camera
NW camera Network settings of cameras such as the IP address and the
port number of the cameras, etc. can be configured.
49
Group The title of the camera group can be set. 54
Sequence Settings that required to perform the sequence display of live
images from cameras can be configured.
55

9
Setup items Description Reference
page
Server
NTP Settings that are required to correct time based on the NTP
server, such as the NTP server address, can be configured.
57
FTP Settings that are required to transmit images from cameras
connected to the recorder to a designated FTP server periodi-
cally can be configured.
58
Mail Settings relating to the mail notification function, that sends
e-mails to addresses registered in advance at an event or error
occurrence, can be configured.
60
Proxy Basic network proxy settings can be configured. Determine
whether or not to use the proxy server, and configure the set-
tings such as the server address settings, etc.
62
Network
Basic Network settings can be configured. Settings that are required
to connect to a network such as the IP address and gateway
address can be configured.
63
DDNS Setting relating to DDNS can be configured. Determine wheth-
er to enable or disable DDNS, and configure the settings of the
registered user names, etc.
67
SNMP Settings relating to SNMP can be configured. Configure the
settings to check the status of the recorder, etc. by connecting
the SNMP manager.
68
Panasonic alarm protocol Settings that are required to send a message to addresses
registered in advance using "Panasonic alarm protocol" when
an event or a problem occurs can be configured.
69
User mng.
Basic Determine whether to enable or disable the user authentication
and the host authentication.
70
Administrator Information of the registered administrators such as the
administrator name, password, the default screen, etc can be
edited.
71
User Settings relating to the user authentication such as user regis-
tration can be configured. User information can be edited or
deleted.
User name, password and operational level can be set.
72
Host Settings relating to the host authentication such as registration
of PCs (hosts) to allow to access the recorder via a network
can be configured. Host information can be edited or deleted.
Operational levels and IP addresses of PCs can be set.
74
User level Functions operable in each user level can be set. 76

10
Setup items Description Reference
page
Maintenance
Product information Versions of the software, the hardware (this recorder), MAC
address, serial number, temperature inside the recorder and
software version of the connected extension unit will be dis-
played.
78
Disk information Disk partition information of the recorder will be displayed.
Information such as the recording information, operational
mode of the hard disk drives, disk capacities, available capaci-
ty of each recording area, etc. will be displayed.
79
Network information Network information such as IP addresses of NW camera con-
nected to the recorder, communication rate to network, etc.
will be displayed.
82
Disk Settings relating to an action to be taken when available
capacity of the hard disk drives run out can be configured, and
data recorded on the hard disk drives can be deleted.
83
Settings management The settings of the recorder can be saved and the saved set-
tings can be loaded to the recorder.
85
Config.
Disk information Information such as the recording information, operational
mode of the hard disk drives, disk capacities, available capaci-
ty of each recording area, etc. will be displayed.
87
Format Assignment of event recording area and copy area, and for-
matting of the hard disk drives can be performed.
89

11
Network settings
Network settings of the recorder
Configure the following settings for the ports to be used.
The following settings can be configured using the buttons on the front panel. Parameters will be displayed on the
LCD.
Setup items Description
DHCP Determine whether or not use a DHCP server. Select "ON" to obtain an IP address,
subnet mask and default gateway from a DHCP server.
IP address When selecting "OFF" for "DHCP", enter an IP address.
Subnet mask When selecting "OFF" for "DHCP", enter a subnet mask.
Default gateway When selecting "OFF" for "DHCP", enter a default gateway.
HTTP port Designate the HTTP port number to be used. Normally "80" is to be designated.
The default network settings of the recorder are as follows.
Setup items Camera port Client PC port Maintenance port
DHCP – OFF –
IP address 192.168.0.250 192.168.1.250 192.168.2.250
Subnet mask 255.255.255.0 255.255.255.0 255.255.255.0
Default gateway – 192.168.1.1 –
HTTP port – 80 –
Important:
 • Thenetworksettingsforeachport(IPaddress,etc.)shouldbeconfiguredwithadifferentsubnet.Otherwise,
network communication may be failed.
Note:
 • WhenthenetworksettingsofthePCareasfollows,itisunnecessarytoconfiguretheabovesettings.Itispos-
sible to configure the settings and operate the recorder using a web browser after completing the connection.
IP address: 192.168.1.2 to 249, 192.168.1.251 to 254
Subnet mask: 255.255.255.0
Default gateway: 192.168.1.1
When the settings values other than above are set, it is necessary to configure the network settings of the
recorder and the PC.
 • Thenetworksettingsofacameracanbeconfiguredonthesetupmenuofthecamera.Refertothe"NWcam-
era" section on page 49 for further information.

12
1Confirm that the standby display is on the LCD.
When a display other than the standby display is on
the LCD, continue pressing the [ESC] button until
the standby display is displayed on the LCD.
2Display the IP address setup display by press the
arrows button (up or down).
3Press the [SET] button.
The "PT#1 IP ADDR" indication will be displayed.
4Select the desired network port by pressing the
arrows button (left or right).
PT#1: Camera port
PT#2: Client PC port
PT#3: Maintenance port
5Display the settings item by pressing the arrows
button (up or down).
DHCP
IP address
Subnet mask
Default gateway
HTTP port
Note:
 • ThesettingsofDHCP,defaultgatewayandHTTP
port can be configured only for "PT#2".
6Press the [SET] button while the underscore
mark (_) is displayed below the ">" indication.
Move the underscore mark below the number to be
edited.
The current selected settings item or a value will be
indicated by the underscore mark "_".
7Enter values using the arrows button.
Move the underscore mark "_": Arrows button (left
or right)
Enter a value: Arrows button (up or down)
8To determine the edited setting, move the under-
score mark below the ">" indication by pressing
the [ESC] button.
9To configure other setting items, shift the display
by pressing the arrows button (up or down).
10 Repeat steps 5 - 8 to configure each setting
item.

13
Network settings of a PC
Change the TCP/IP setting of the PC to conform to the settings of the recorder. It is necessary to set the IP address
of the PC and the client PC port of the recorder in the same subnet to access the recorder.
In these operating instructions, the settings are performed on Windows XP as examples. When using an operating
system other than Windows XP, refer to the operating instructions of the OS in use.
Example: When using the recorder with the default (IP address: 192.168.1.250), set the IP address of the PC to
"192.168.1.xxx (a number from 2 to 254 except 250)".
1Log in to the PC as an administrator.
2Click "Start" on the taskbar, and then click the
"Control Panel".
3Click the "Network and Internet Connections"
icon.
The "Network and Internet Connections" window
will be displayed.
4Click "Network Connections".
The "Network Connections" window will be dis-
played.
5Double click "Local Area Connection".
The "Local Area Connection 2 Status" window will
be displayed.

14
6Click "Properties".
The "Local Area Connection 2 Properties" window
will be displayed.
7Click "Internet Protocol (TCP/IP)", and then click
"Properties".
The "Internet Protocol (TCP/IP) Properties" window
will be displayed.
8Click "Use the following IP address" and enter
the IP address and the subnet mask as follows;
IP address: Set in the same subnet as the record-
er's.
Depending on the network configuration, it is neces-
sary to configure the default gateway. Refer to a
system administrator for information on how to con-
figure the setting.
9Click the [OK] button and close the window.

15
About the operation window
Display/Close the operation window
Display the operation window using a web browser installed on a PC.
1Boot the PC.
2Launch a web browser.
3After the browser starts, enter the IP address set
to the recorder in the address box, and press the
enter key.
The authentication window will be displayed.
This window will not be displayed when "Off" is
selected for "User authentication" on the "Basic"
tab page of "User management". (Page 70)
Important:
 • RefertoasystemadministratorforthesetIP
address of the recorder.
 • ItisimpossibletoaccesstherecorderfromaPC
which IP address is not registered to the recorder
when "On" is selected for "Host authentication" on
the "Basic" tab page of "User management". (Page
70)
Refer to a system administrator for further informa-
tion.
 • Donotattach"0"beforethenumberswhenentering
IP address.
Example:
OK: 192.168.0.50
NG: 192.168.0.050
 • Ifamessageisdisplayedontheinformationbar,
see page 102.
4Enter the user name and password registered on
the recorder and then click the [login] button.
The top page will be displayed.
Important:
 • Refertoasystemadministratorforthesetuser
name and password.
Refer to the "User" section on page 72 for informa-
tion on how to register users.
 • Thedefaultadministratornameandpasswordare
as follows
User name: ADMIN
Password: 12345
 • Toenhancethesecurity,changethepasswordfor
an administrator before running the recorder.
Change the password periodically. Refer to page 72
for information on how to change the password.
 • Whentherecorderisbeingoperatedwithoutchang-
ing the user name and password, the pop-up win-
dow saying that it is recommended to change the
password will be displayed.

16
5Configure the settings and perform operations
by clicking the buttons and the tabs on the oper-
ation window.
Important:
 • Ifamessageisdisplayedontheinformationbar,
see page 102.
Note:
 • Whenthetoppageisdisplayedforthefirsttime,the
install wizard of the ActiveX control required to dis-
play images from the camera will be displayed.
Follow the instructions of the wizard.
 • WhenActiveXforWJ-ND200/WJ-ND300is
installed, remove "WebVideo ActiveX" using the
"Add or Remove Programs" control panel. After
confirming that "WebVideo ActiveX" is deleted,
install ActiveX of WJ-ND400.
 • Whentheinstallwizardisdisplayedagainevenafter
completing the installation of the ActiveX, reboot the
PC.
6Close the web browser when there is no more
operation/settings configuration to be per-
formed.
Click the [X] button at the top right of the window or
shut down the browser.

17
Major operating controls and their functions
Top page
q[Control] button (page 18)
The operation panel will be displayed by clicking
this button, and operations such as searching for
recorded pictures on the hard disk drives and copy-
ing recorded images onto the copy area of the hard
disk drives can be performed from the displayed
operation panel. From the displayed operation
panel, it is also possible to display images by
switching the camera channels such as changing
the screen of live image display from 1-screen to
4-screen, and the sequence display. Search results
or log information will also be displayed on this
panel.
w[Cam. Select] button (page 19)
The switcher functions such as switching camera
channels are operable on this page.
e[Setup] button (page 20)
The settings of the recorder can be configured on
the setup menu pages displayed by clicking this
button.
rStatus display area (page 21)
The status of the recorder such as the recording
status, playback status, etc. will be displayed.
tCurrent time display area
The current time will be displayed.
yImage display area
Recorded images and live images will be displayed.
The camera title is displayed at the upper left and
the time and date (the current time and date of the
camera's clock when displaying live images and the
time and date when images were recorded when
playing recorded images) at the upper right. Clicking
the camera title during displaying images on a
4-screen will display images from the respective
camera channel on a 1-screen.
At the default, the aspect ratio of each screen seg-
ment is 4:3. Refer to the aspect ratio setting (page
32) for changing the aspect ratio to 16:9.
uPlayback point operation area (page 22)
It is possible to designate a playback point or to
skip to the latest recorded image.
i[HDD] tab (page 22)
Playback operation and downloading a recorded
image onto a PC can be performed on this tab.
o[CAM] tab (page 24)
Camera operations such as zooming, focusing, auto
functions, etc. can be performed on this tab.
q
o
i
u
y
w e r t

18
[Control] button
The following operation panel will be displayed when
the [Control] button is clicked.
q[Multiscreen select] box
Images from up to 4 cameras can be displayed
simultaneously on a multi-screen. Each time the
button is clicked, images from the 4 cameras regis-
tered as a group in advance will be displayed on a
4-screen. (Page 51)
w[Sequence] box
When this button is clicked, the camera channels
will be switched automatically and images from
them will be displayed sequentially according to the
settings configured in advance. The indicator on the
button will light (green) during sequence display.
(Page 55)
e[EL-zoom] box
Camera images will be displayed in the proportion
of the clicked zoom ratio button.
:1x
:2x
:4x
r[Search] box
[Search] button
Use this button to search the recorded images.
Search results will be displayed in list form in the list
display area.
(Refer to the operating instructions (PDF).)
[Area select] button
Use this button to select a disk on which recorded
images are to be played/searched.(Refer to the
operating instructions (PDF).)
t[Copy] box
The "Data copy" window will be displayed by click-
ing this button. Copying recorded images onto the
copy area of the hard disk drive can be performed
on the "Data copy" window.
y[Log] box
Logs will be displayed in list form in the list display
area.
[Error log] button
The error logs will be in list form in the list display
area.
[Access log] button
The time and date when logged in/out of the record-
er, the user name, and the IP address will be dis-
played. The access logs will be displayed in list form
in the list display area.
[Event log] button
The time and date of event occurrences and their
details will be displayed. The event logs will be dis-
played in list form in the list display area.
[Network log] button
The network logs will be displayed in list form in the
list display area.
q
w
r
e
t
y
u
i

19
uList display area
Number of listed data (recording events or logs)
Total number of listed data (recording events or
logs) will be displayed. When the total number of
the listed data is more than 10 000, the ">10000"
indication will be displayed.
[All list] button
Cancels filtering and lists all recording events.
[Refresh] button
Updates the list.
[Prev page] button
Displays the previous page of the list.
[Next page] button
Displays the next page of the list.
[Time & date]
Start time of recording will be displayed.
[Ch]
A camera channel used for recording will be dis-
played.
[Rec]
Recording mode will be displayed.
HDD (hard disk drive)
The hard disk drive number in which the corre-
sponding recorded images are stored will be dis-
played.
[Info]
Additional information will be displayed.
:Audio is attached to images.
i[Zoom in] button
Enlarges live or recorded images displayed in the
image display area.
Live images and recorded images will be displayed
in the size selected for the aspect ratio setting.
Refer to page 32 for further information about the
aspect ratio setting.
Note:
 • Therecordingeventlistwillbedisplayedwhenthe
[Refresh] button is clicked or when performing the
search or the area selection. Refer to the operating
instructions (PDF) for further information about the
search and the area selection.
 • The[Alllist]buttonisunavailableduringplayback.
Start operation after stopping the playback.
 • Whenusingmanycameras,therecordingeventlist
may not be displayed in the recording start time
order of each camera channel.
[Cam. select] button
The following operation panel will be displayed when
the [Cam. select] button is clicked.
q[Multiscreen select] box
Images from up to 4 cameras can be displayed
simultaneously on a multi-screen. Each time the
button is clicked, images from the 4 cameras regis-
tered as a group in advance will be displayed on a
4-screen. (Page 51)
w[Sequence] box
When this button is clicked, the camera channels
will be switched automatically and images from
them will be displayed sequentially according to the
settings configured in advance. The indicator on the
button will light (green) during sequence display.
(Page 55)
e[El-zoom] box
Camera images will be displayed in the proportion
of the clicked zoom ratio button.
:1x
:2x
:4x
r[Cam. select] box
When clicking "WJ-ND400", a group title (title of a
group consisted of the 4 registered cameras) will be
displayed. Refer to page 54 for further information
about the camera group settings.
When clicking the group title, a list of the cameras
consisting of the group will be displayed. Clicking
the camera title will display images from the select-
ed camera channel on a 1-screen in the image dis-
play area.
q
w
e
r
Group title
Camera title

20
[Setup] button
The following operation panel will be displayed when
the [Setup] button is clicked.
q[Quick] button
Displays the "Quick" page that contains the mini-
mum required settings to be configured to operate
the recorder.
w[Basic] button
Displays the "Basic" page that contains the basic
system settings and the time & date settings.
e[Emergency rec.] button
Displays the "Emergency rec." page that contains
the settings relating to the emergency recording.
r[Event] button
Displays the "Event" page that contains the settings
relating to the event actions to be taken at an event
occurrence for each event type (site alarm, terminal
alarm, command alarm).
t[Schedule] button
Displays the "Schedule" page that contains the set-
tings relating to the schedule recording and the
event action.
y[Camera] button
Displays the "Camera" page that contains the net-
work settings of cameras, and the settings relating
to the group and the sequence display.
u[Server] button
Displays the "Server" page that contains the set-
tings of the NTP server, FTP server, mail server and
proxy server.
i[Network] button
Displays the "Network" page that contains the net-
work settings.
o[User mng.] button
Displays the "User mng." page that contains the
settings relating to authentication.
!0 [Maintenance] button
Displays the "Maintenance" page that contains the
information display pages (about the recorder, disk
and network), and the settings relating to the hard
disk drives and saving/loading of the settings.
!1 [Config.] button
Displays the "Disk config." page that contains the
disk partition information display page, the settings
relating to formatting of the hard disk drives.
Important:
 • Whenanyofeditedsettingsareapplied,alllogin
users will forcibly be logged out.
!2 [Help] button
The "Help" page will be displayed.
q
w
e
r
t
y
u
i
o
!0
!1
!2