Panasonic Minas E Series Use and care manual

Thank you very much for your
purchase of Panasonic AC Servo
Motor & Driver, MINAS E-series.
Before use, refer this manual and
safety instructions to ensure
proper use. Keep this manual
and read when necessary.
Make sure to forward this manual
for safety to the final user.
Technical reference
AC Servo Motor & Driver
MINAS E-series
If you are the first user of this product, please be sure to purchase and read
the optional Engineering Material (DV0P3700), or downloaded instruction
Manual from our Web Site.
1.Introduction ........................... B2
After Opening the Package ....................... B2
Check the Model of Driver ......................... B2
Check the Model of Motor ......................... B3
2.System Configuration
and Wiring ............................. B4
General Wiring Diagram ............................ B4
Wiring of Connectors CN X1, X3
(Wiring of Main Circuits) ......................... B6
Wiring to Connector CN X4
(Connection with Encoder) ..................... B7
Circuit Available for Typical
Control Modes ........................................ B8
3.Parameter ............................ B10
Parameter ................................................ B10
4.Protective Functions .......... B15
Protective Functions
(What is alarm code?) ............................. B15
5.Conformance to EC Directives
and UL standards................ B17
Peripheral Equipment .............................. B18
Conformance to EC Directives and
UL Standards ........................................ B20
After-Sale Service (Repair) .... B21
page page
<Contents>
Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [email protected]
This product is for industrial
equipment. Don't use this
product at general household.
●


Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [email protected]

Install an external regenerative resistor on
incombustible material, such as metal, and
provide the regenerative resistor with a
protective device such as temperature fuse,
etc, to prevent the resistor from being
overheated.
(Optional)
Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [email protected]

Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [email protected]

Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [email protected]

Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [email protected]

Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [email protected]

Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [email protected]

Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [email protected]

Phone: [phone] - Fax: [phone] - Web: www.clrwtr.com - Email: [email protected]