Panasonic KX-FHD333BR User manual

©2002 Kyushu Matsushita Electric Co., Ltd. All
rights reserved. Unauthorized copying and
distribution is a violation of law.
KX-FHD333BR
(for Brazil)
Compact Plain Paper FAX and Copier
ORDER NO. KMF0207599C3

1 TRANSLATION LISTS 3
1.1. LCD MESSAGES 3
1.2. ERROR CODE 4
1.3. BUTTON LISTS 4
2 INTRODUCTION 5
2.1. SAFETY PRECAUTIONS 5
2.2. INSULATION RESISTANCE TEST 5
2.3. FOR SERVICE TECHNICIANS 5
2.4. BATTERY CAUTION 5
2.5. AC CAUTION 6
2.6. PERSONAL SAFETY PRECAUTIONS 6
2.7. SERVICE PRECAUTIONS 7
3 FEATURES AND SPECIFICATIONS 8
3.1. FEATURES 8
3.2. OPTIONAL ACCESSORIES 8
3.3. SPECIFICATIONS 9
4 INSTALLATION 10
4.1. LOCATION OF CONTROLS 10
4.2. CONNECTIONS 12
4.3. INSTALLATION 13
5 MAINTENANCE 20
5.1. MAINTENANCE ITEMS AND COMPONENT LOCATIONS
20
5.2. GEAR SECTION 23
5.3. JAMS 25
5.4. CLEANING 27
6 DISASSEMBLY INSTRUCTIONS 30
6.1. DISASSEMBLY FLOW CHART 30
6.2. DISASSEMBLY PROCEDURE 32
6.3. INSTALLATION POSITION OF THE LEAD WIRES 44
7 TROUBLESHOOTING GUIDE 45
7.1. USER RECOVERABLE ERRORS 45
7.2. PROGRAMMING AND LISTS 47
7.3. TEST FUNCTIONS 50
7.4. REMOTE PROGRAMMING 53
7.5. THE EXAMPLE OF THE PRINTED LIST 56
7.6. TROUBLESHOOTING DETAILS 60
8 CIRCUIT OPERATIONS 116
8.1. CONNECTION DIAGRAM 116
8.2. GENERAL BLOCK DIAGRAM 117
8.3. CONTROL SECTION 119
8.4. FACSIMILE SECTION 127
8.5. GEAR SECTION 135
8.6. SENSORS AND SWITCHES 135
8.7. MODEM SECTION 138
8.8. ANALOG SECTION 145
8.9. NCU SECTION 147
8.10. ITS (Integrated Telephone System) AND MONITOR
SECTION 151
8.11. TAM INTERFACE SECTION 152
8.12. OPERATION BOARD SECTION 154
8.13. LCD SECTION 155
8.14. POWER SUPPLY BOARD SECTION 156
9 REFERENCE MATERIAL DATA 159
9.1. TERMINAL GUIDE OF THE ICs TRANSISTORS AND
DIODES 159
9.2. HOW TO REPLACE THE FLAT PACKAGE IC 160
9.3. TEST CHART 162
10 FIXTURES AND TOOLS 164
11 CABINET, MECHANICAL AND ELECTRICAL PARTS
LOCATION 165
11.1. GENERAL SECTION 165
11.2. OPERATION PANEL SECTION 166
11.3. BACK COVER SECTION 167
11.4. UPPER CABINET SECTION 169
11.5. LOWER CABINET / P.C.BOARD SECTION 170
11.6. MOTOR SECTION 171
11.7. ACTUAL SIZE OF SCREWS 171
12 ACCESSORIES AND PACKING MATERIALS 172
13 REPLACEMENT PARTS LIST 173
13.1. CABINET AND ELECTRICAL PARTS 173
13.2. DIGITAL BOARD PARTS 174
13.3. ANALOG BOARD PARTS 177
13.4. OPERATION BOARD PARTS 178
13.5. POWER SUPPLY BOARD PARTS 178
13.6. SENSOR BOARD PARTS 179
13.7. FIXTURES AND TOOLS 179
14 PRINTED CIRCUIT BOARD 180
14.1. DIGITAL BOARD (PCB1) 180
14.2. ANALOG BOARD (PCB2) 182
14.3. OPERATION BOARD (PCB3) 184
14.4. SENSOR BOARD (PCB5) 185
14.5. POWER SUPPLY BOARD (PCB4) 186
15 FOR THE SCHEMATIC DIAGRAMS 187
16 SCHEMATIC DIAGRAM 188
16.1. ANALOG BOARD (PCB2) 188
16.2. DIGITAL BOARD (PCB1) 190
16.3. OPERATION BOARD (PCB3) 194
16.4. POWER SUPPLY BOARD (PCB4) 195
16.5. SENSOR BOARD (PCB5) 196
CONTENTS
Page Page
2
KX-FHD333BR

1 TRANSLATION LISTS
1.1. LCD MESSAGES
3
KX-FHD333BR

1.2. ERROR CODE
1.3. BUTTON LISTS
4
KX-FHD333BR

2 INTRODUCTION
2.1. SAFETY PRECAUTIONS
1.Before servicing, unplug the AC power cord to prevent an electric shock.
2.When replacing parts, use only the manufacturer´s recommended components.
3.Check the condition of the power cord. Replace if wear or damage is evident.
4.After servicing, be sure to restore the lead dress, insulation barriers, insulation papers, shields, etc.
5.Before returning the serviced equipment to the customer, be sure to perform the following insulation resistance test to prevent
the customer from being exposed to shock hazards.
2.2. INSULATION RESISTANCE TEST
1.Unplug the power cord and short the two prongs of the plug with a jumper wire.
2.Turn on the power switch.
3.Measure the resistance value with an ohmmeter between the jumpered AC plug and each exposed metal cabinet part
(screw heads, control shafts, bottom frame, etc.).
Note: Some exposed parts may be isolated from the chassis by design. These will read infinity.
4.If the measurement is outside the specified limits, there is a possibility of a shock hazard.
2.3. FOR SERVICE TECHNICIANS
ICs and LSIs are vulnerable to static electricity.
When repairing, the following precautions will help prevent recurring malfunctions.
1.Cover the plastic part´s boxes with aluminum foil.
2.Ground the soldering irons.
3.Use a conductive mat on the worktable.
4.Do not touch the IC or LSI pins with bare fingers.
2.4. BATTERY CAUTION
CAUTION
Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the
manufacturer. Dispose of used batteries according to the manufacturer’s Instructions.
The lithium battery is a critical component (type No. CR2032). Please observe for the proper polarity and the exact location
when replacing it and the exact location when replacing it and soldering the replacement lithium battery in.
Recommend Type Number:
CR2032 (BAT501) Manufactured by MATSUSHITA/SONY/TOSHIBA/HITACHI
5
KX-FHD333BR

2.5. AC CAUTION
For safety, before closing the lower cabinet, please make sure of the following precautions.
1.The earth lead is fixed with the screw.
2.The AC connector is connected properly.
3.Wrap the earth lead around the core 3 times.
4.Wrap the AC lead around the core 2 times.
2.6. PERSONAL SAFETY PRECAUTIONS
2.6.1. MOVING SECTIONS OF THE UNIT
Be careful not to let your hair, clothes, fingers, accessories, etc., become caught in any moving sections of the unit.
The moving sections of the unit are the rollers and a gear. There is a separation roller and a document feed roller which are rotated
by the document feed motor. A gear rotates the two rollers. Be careful not to touch them with your hands, especially when the unit
is operating.
6
KX-FHD333BR

2.6.2. LIVE ELECTRICAL SECTIONS
All the electrical sections of the unit supplied with AC power by the AC power cord are live.
Never disassemble the unit for service with the AC power supply plugged in.
CAUTION:
AC voltage is supplied to the primary side of the power supply unit. Therefore, always unplug the AC power cord before
disassembling for service.
2.7. SERVICE PRECAUTIONS
2.7.1. PRECAUTIONS TO PREVENT DAMAGE FROM STATIC ELECTRICITY
Electrical charges accumulate on a person. For instance, clothes rubbing together can damage electric elements or change their
electrical characteristics. In order to prevent static electricity, touch a metallic part that is grounded to release the static electricity.
Never touch the electrical sections such as the power supply unit, etc.
7
KX-FHD333BR

General
·Help function
Display:
−− QUICK SET UP
−− FEATURE LIST
−− DIRECTORY
−− FAX RECEIVING
−− COPIER
−− REPORTS
−− CALLER ID
·LCD (Liquid Crystal Display) readout
·TAM (Telephone answering machine) interface
Plain Paper Facsimile Machine
·15 second transmission speed *
·A4 / Letter, G3 compatible
·Automatic document feeder (10 sheets)
·Quick scan
·Resolution: Standard / Fine / Super fine / Photo (64 level)
·Broad cast with Navigator
·50-sheet paper capacity (20 lb.)
·Distinctive ring detection **
* The 15 second speed is based upon the ITU-T No. 1 Test
Chart on the condition that memory transmission is performed.
** Subscription to distinctive ring services is required.
Large Memory (28 pages)... Performed by DRAM
Approx. 25 pages of memory transmission
Approx. 28 pages of memory reception
Integrated Telephone System
·On-hook dialing
·Monitor speaker
·Voice muting
·Redialing function
·100-Station telephone directory with Navigator/one-touch
key
·Caller ID compatible***
***Feature requires a subscription to caller identification
services offered by certain local telephone companies for a
tee. You and your caller(s) must be in areas that provide
caller identification services, and compatible equipment
must be used by both telephone companies. Feature not
available when the unit is connected to a PBX system.
Enhanced Copier Function
·Multi-copy function (up to 50 copies)
·Enlargement and reduction
·Collate
·64-Level halftone
3 FEATURES AND SPECIFICATIONS
3.1. FEATURES
3.2. OPTIONAL ACCESSORIES
·The included film roll is 10 meters long. We recommend that you buy a full-size replacement film 70 meters for continuous use
of your unit. For best results, use genuine Panasonic replacement film as follows:
Model No. Description Specifications
KX-FA57A Replacement Film 216 mm × 70 m
Note:
The ink film is not reusable. Do not rewind and use the ink film again.
8
KX-FHD333BR

3.3. SPECIFICATIONS
Applicable Lines: Public Switched Telephone Network
Document Size: Max. 216 mm in width
Max. 600 mm in length
Effective Scanning Width: 208 mm
Recording Paper Size: A4: 210×297 mm
Letter: 216×279 mm
Effective Printing Width: 208 mm
Transmission Time*1:Approx. 15 s/page (Original mode)*2
Scanning Density: Horizontal:
8 pels/mm
Vertical:
3.85 lines/mm—STANDARD mode
7.7 lines/mm—FINE / PHOTO mode
15.4 lines/mm—SUPER FINE Mode
Halftone Level: 64-level
Scanner Type: Contact Image Sensor (CIS)
Printer Type: Thermal Transfer on Plain Paper
Data Compression System: Modified Huffman (MH), Modified READ (MR)
Modem Speed: 9,600/7,200/4,800/2,400 bps; Automatic Fallback
Operating Environment: 5—35°C, 20—80 % RH (Relative Humidity)
Dimensions: Approx. height 185 mm × width 355 mm × depth 275 mm
Mass (Weight): Approx. 3.4 kg
Power Consumption: Standby: Approx. 3.6 W
Transmission: Approx. 12 W
Reception: Approx. 40 W (When receiving a 20% black document)
Copy: Approx. 55 W (When copying a 20% black document)
Maximum: Approx. 135 W (When copying a 100% black document)
Power Supply: 120 V AC, 60 Hz
Memory Capacity: Approx. 25 pages memory transmission
Approx. 28 pages memory reception
(Based on ITU-T No. 1 Test Chart in standard resolution.)
*1Transmission speed depends upon the contents of the pages, resolution, telephone line conditions and capability of the other
party’s machine.
*2Transmission speed is based upon the ITU-T No. 1 Test Chart and original mode. (Refer to ITU-T No.1 TEST CHART (P.162).)
If the capability of the other party´s machine is inferior to your unit, the transmission time may be longer.
Note:
·Any details given in these instructions are subject to change without notice.
·The pictures and illustrations in these instructions may vary slightly from the actual product.
9
KX-FHD333BR

(1) Handset
(2) Document guides
(3) Paper tray
(4) Recording paper support
(5) Recording paper entrance
(6) Recording paper exit
(7) Tension plate
(8) Front cover
(9) Document exit
(10) Document entrance
(11) Back cover open button
(12) Back cover
(1) Power inlet
(2) Telephone line jack
(3) External telephone jack
(4) Speaker
4 INSTALLATION
4.1. LOCATION OF CONTROLS
4.1.1. FRONT VIEW
4.1.2. REAR VIEW
10
KX-FHD333BR

(1) [TONE]
·To change from pulse to tone temporarily during dialing
when your line has rotary pulse services.
(2) [JUNK FAX PROHIBITOR]
·To use the Junk Fax Prohibitor.
(3) Display
(4) [RECEIVE MODE]
·To change the receiving mode.
(5) [LOWER]
·To select stations 6-10 for one-touch dial.
(6) [HELP]
·To print a quick reference.
(7) [CALLER ID]
·To use caller ID service.
(8) [FLASH]
·To access special telephone services such as call
waiting or for transferring extension calls.
(9) [REDIAL/PAUSE]
·To redial the last number dialed.
·To insert a pause during dialing.
(10) [MUTE]
·To mute your vice to the other party during a
conversation. Press this button again to resume the
conversation.
(11) [MONITOR]
·To initiate dialing without lifting the handset.
(12) One-touch keys
·To use one-touch dial.
·To transmit to multiple entries.
(13) [NAVIGATOR, VOLUME]
·To adjust volume.
·To search for a stored name.
·To select the features or feature settings during
programming.
·To navigate to the next operation.
(14) [MENU]
·To initiate or exit programming.
(15) [COPY]
·To initiate copying.
(16) [STOP]
·To stop an operation or cancel programming.
(17) [FAX/START, SET]
·To initiate fax transmission or reception.
·To store a setting during programming.
4.1.3. CONTROL PANEL
Refer to BUTTON LISTS (P.4).
11
KX-FHD333BR

4.2. CONNECTIONS
(1) Connect the handset cord.
(2) Connect the telephone line cord.
(3) Connect the power cord.
Note:
·To avoid malfunction, do not position fax machine near appliances such as TVs or speakers which generate an intense
magnetic field.
·If any other device is connected on the same line, this unit may disturb the network condition of the device.
Caution:
·When you operate this product, the power outlet should be near the product and easily accessible.
12
KX-FHD333BR

4.3. INSTALLATION
4.3.1. INSTALLATION SPACE
The space required to install the unit is shown below.
The dimensions given are necessary for the unit to operate efficiently.
Note:
·Avoid excessive heat or humidity.
·Use the unit within the following ranges of temperature and humidity.
·Ambient temperature: 5°C to 35°C
·Relative humidity: 20% to 80% (without condensation)
·Power cord length should be less than 5 meters. Using a longer cord may reduce the voltage or cause malfunctions.
·Avoid direct sunlight.
·Do not install near devices which contain magnets or generate magnetic fields.
·Do not subject the unit to strong physical shock or vibration.
·Keep the unit clean. Dust accumulation can prevent the unit from functioning properly.
·To protect the unit from damage, hold both sides when you move it.
13
KX-FHD333BR

4.3.2. INSTALLING THE PAPER TRAY
The included paper tray is for letter size recording paper.
Insert tabs on the paper tray into slits on the back of the unit.
Note:
·Do not place the unit in areas where the paper tray may be
obstructed (i.e. by a wall, etc.).
To use A4 size paper
You need to install the A4 paper guide to the right side of he paper
tray.
1. Insert the bottom tab on the A4 paper guide into the lower slot.
2. Press the guide into the upper slot.
4.3.3. INSTALLING THE RECORDING
PAPER SUPPORT
Attach the recording paper support into the slots on the recording
paper exit.
The recording paper will be ejected from the top of the unit after
printing. The recording paper support prevents the printed paper
from curling.
4.3.4. HANDSET
Connect the handset cord.
14
KX-FHD333BR

1Open the front cover by pulling up the center part.
2Push the back cover open button (green) on the right side of the
unit.
OR
Push the back cover open lever (green) inside of the unit.
3Open the back cover.
4Insert the gear of blue core of the front ink film roll into the left
slot of the unit ( ). Insert the rear ink film roll ( ).
5Turn the gear of blue core in the direction of the arrow.
·Make sure that the ink film is wrapped around the blue core
at least once.
6Close the back cover securely by pushing down on the dotted
area at both ends ( ). Close the front cover securely ( ).
·The ink film is safe to touch and will not rub off on your
hands like carbon paper.
4.3.5. INSTALLING THE INK FILM
15
KX-FHD333BR

4.3.6. INSTALLING THE RECORDING PAPER
Letter or A4 size recording paper can be loaded. The unit can hold up to 50 sheets of 75 g/m2paper. You may use 60 g/m2to
90 g/m2paper. See the note for paper specifications. If you use legal size paper, please install a legal paper tray. (Refer to
INSTALLING THE PAPER TRAY (P.14).)
1Fan the stack of paper to prevent a paper jam.
2Pull the tension plate forward and hold open while inserting the
paper. ·The paper should not be over the tab.
·If the paper is not inserted correctly, readjust the paper, or
the paper may jam.
To add paper
1.Pull the tension plate forward and hold open while removing all
of the installed paper.
2.Add paper to the stack of paper you removed and straighten.
3.Fan the stack of paper.
4.Pull the tension plate forward and hold open while inserting the
paper.
16
KX-FHD333BR

4.3.7. DOCUMENTS THE UNIT CAN FEED
Note:
·Remove chips, staples or other similar fasteners.
·Do not send the following types of documents. (Use the scanner glass for fax transmission.)
— Chemically treated paper such as carbon or carbon less duplicating paper
— Electrostatically charged paper
— Badly curled, creased or torn paper
— Paper with a coated surface
— Paper with a faint image
— Paper with printing on the opposite side that can be seen through the other side (i.e. newspaper)
·Check that ink, paste or correction fluid has dried completely.
·To transmit the document with a width of less than standard letter size (216 mm), we recommend using a copy machine to
copy the original document onto letter-sized paper, than transmit the copied document.
17
KX-FHD333BR

4.3.8. SETTING YOUR LOGO
The logo can be your company, division or name. Refer to LCD MESSAGES (P.3) and BUTTON LISTS (P.4).
To change capital or lower-case letters
Pressing the [#] key will change to capital or lower-case
alternatively.
1.Press [2] 2 times.
2.Press [4] 3 times.
3.Press [#].
4.Press [5] 3 times.
1Press [MENU].
2Press [ ] or [ ] until the following is displayed.
3Press [SET].To correct a mistake
Press [ ] or [ ] to move the cursor to the incorrect character,
and make the correction.
To delete a character
Press [ ] or [ ] to move the cursor to the character you want
to delete and press [STOP].
To insert a character
1.Press [ ] or [ ] to move the cursor to the position to the
right of where you want to insert the character.
2.Press [MUTE] to insert a space and enter the character.
4Enter your logo, up to 30 characters, using the dial keypad.
Example: “BILL“
1.Press [2] 2 times.
·Cursor ( ) will appear on the display.
2.Press [4] 3 times.
3.Press [5] 3 times.
4.Press [ ] to move the cursor to the next space and press [5] 3
times.
5Press [SET].
·The next feature will be displayed.
6Press [MENU].
Note:
·You can enter your logo by pressing [+] or [-] in step 4. In
this case, press []to move the cursor.
18
KX-FHD333BR

To select characters using [+] or [-]
Instead of pressing the dial keys, you can select characters
using [+] or [-].
1.Press [+] or [-] until the desired character is displayed.
2.Press []to move the cursor to the next space.
·The character displayed in step 1 is inserted.
3.Return to step 1 to enter the next character.
Display order of characters
4.3.8.1. TO SELECT CHARACTERS WITH THE DIAL KEYPAD
Pressing the dial keys will select a character as shown below.
19
KX-FHD333BR

5 MAINTENANCE
5.1. MAINTENANCE ITEMS AND COMPONENT LOCATIONS
5.1.1. OUTLINE
MAINTENANCE AND REPAIRS ARE PERFORMED USING THE FOLLOWING STEPS.
1.Periodic maintenance
Inspect the equipment periodically and if necessary, clean any contaminated parts.
2.Check for breakdowns
Look for problems and consider how they arose.
If the equipment can be still used, perform copying, self testing or communication testing.
3.Check equipment
Perform copying, self testing and communication testing to determine if the problem originates from the transmitter, receiver or
the telephone line.
4.Determine causes
Determine the causes of the equipment problem by troubleshooting.
5.Equipment repairs
Repair or replace the defective parts and take appropriate measures at this stage to ensure that the problem will not recur.
6.Confirm normal operation of the equipment
After completing the repairs, conduct copying, self testing and communication testing to confirm that the equipment operates
normally.
7.Record keeping
Make a record of the measures taken to rectify the problem for future reference.
20
KX-FHD333BR