1 REPLACEMENT PARTS LISTS
1.1. REFERENCE CHART
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS
COMPARISON LISTS .
1. Improve performance Remarks:
*a: To improve the ADF performance.
*b: Change of company name.
*c: The label which wrote the paper jam removal method is added.
*d: To show the PC software compatible with WindowsNT4.0/XP.
*e: To improve the quality.
*f: To correct error writing.
*g: The reinforcement coutermeasure of the EXIT SENSOR LEVER.
*h: To improve the tactile response of the Key.
*j: To share the parts with other models.
*k: To increase the safety margin.
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Interchangeability Code
**The following items (V-Z) indicate the interchangeability. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON
LISTS .
Parts Set Production
V Original
New
Early (before change)
Late (after change)
Original or new parts may be used in early or late production set.
Use original parts until exhausted, then stock new parts.
W Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in early or
late production sets. Use original parts where possible, then stock new parts.
X Original
New
Early (before change)
Late (after change)
New parts only may be used in early or late production sets.
Stock new parts.
Y Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.
Z Other
Note:
Alphabets in the “Remarks” column in the following lists correspond to the alphabets in the “Remarks”inREFERENCE
CHART.
1.2. ORIGINAL AND NEW PARTS COMPARISON LISTS
Change of the Suffix Code
Suffix Code Reasons of change
A→B The pressure roller is changed to prevent a paper jam.
B→C To upgrade the PC software to support for WindowsNT4.0/XP.
Serial No.Label tells you the suffix code as follows.
Ref No. Part No. Part Name & Descriptions Pcs/Set Remarks Notes Suffix
Original (Old) New
CABINET AND ELECTRICAL PARTS
10 PFKV1051Z1 PFKV1051X1 COVER 1 *a 1 X
21 PFKV1050W1 PFKV1050V1 COVER, TOP *1 1 *a 1 X
35→
→→
→36 PFDR1029Z PFDR1029Z ROLLER, FEED PINCH 1 *f 7 ---
36→
→→
→35 PFUS1340Z PFUS1340Z LEAF SPRING, FEED PINCH 1 *f 7 ---
41 PFUE1011Z1 PFUE1011Y1 FRAME, CONVEYOR MAIN *1 1 *a 1 X
95 PFUS1342Z PFUS1342Y LEAF SPRING 1 *a 1 X
161 PFDS1003Y PFDS1003X ROLLER, TRANSFER 1 *j 8 V
163 PFMH1090Z PFMH1090Y METAL PART *2 1 *e 1 V
187 PFHX1509Z PFGV1016Z COVER, LCD PROTECT 1 *e 1 X
189 PFGX1004Z PFGX1015Y PUSH BUTTON, STOP 1 *h 1 X
190 PFGX1002Z PFGX1013Y PUSH BUTTON, COPY 1 *h 1 X
191 PFGX1003Z PFGX1014Y PUSH BUTTON, FAX 1 *h 1 X
193 PFHX1561Z ---------- COVER, SHEET *2 1 *e 6 X
236 PFGT1956Z-M PFGT1956Y-M NAME PLATE 1 *b 8 X
2
KX-FLB752CX