Panasonic Nanoe EH-ANA3 User manual

使用说明书
（家用）电吹风
型号 EH-ANA3
中文
中文
3
English 13
English 13

2

3
中文
目录
目录
感谢您购买本公司产品。
在使用本产品前，请仔细阅读本说明书并妥善保管，以备将来参考。
在使用本产品前，请仔细阅读本说明书并妥善保管，以备将来参考。
使用说明书
（家用）电吹风
型号 EH-ANA3
安全注意事项
安全注意事项
....................
....................
4
部件名称 ........................ 7
风嘴的安装和拆卸方法 ............ 7
电吹风的基本使用方法 ............ 7
nanoeTM（纳米水离子）技术 ....... 8
电吹风的保养 .................... 8
故障排除 ....................... 10
规格 ........................... 11

4
中文
nanoeTM
（纳米水离子）标记为松下电器产业株式会社商标。
nanoeTM（纳米水离子）是被水包裹着的微粒子离子。
安全注意事项
安全注意事项
为减少故障、触电、受伤、火灾、死亡以及设备或财产
损坏的危险，请务必遵守以下安全注意事项。
标志说明
标志说明
以下标志用于对因无视标志说明和使用不当而导致的危
险、伤害和财产损失的程度进行分类和描述。
警告
警告 表示可能会导致重伤或死亡的潜在
危险。
注意
注意 表示可能会导致轻伤的危险。
以下标志用于对需要遵循的说明的种类进行分类和描述。
此标志用于提醒用户注意禁止采取的操作步骤。
此标志用于提醒用户注意为了安全操作本产品而
必须遵循的操作步骤。
警告
警告
电源线或插头损坏、发热时，请勿使用。
电源线或插头损坏、发热时，请勿使用。
- 否则可能导致烫伤、触电，或由于短路而导致
火灾。
插入插座的电源插头松动时，请勿使用。
插入插座的电源插头松动时，请勿使用。
- 否则可能导致烫伤、触电或因短路而引发火灾。
请勿损坏或改装、或用力弯曲、拉拔或扭曲电源线。
请勿损坏或改装、或用力弯曲、拉拔或扭曲电源线。
另外，请勿在电源线上面放置重物或挤压电源线。
另外，请勿在电源线上面放置重物或挤压电源线。
- 否则可能导致触电或因短路而引发火灾。
请勿在捆着电源线的状态下使用。
请勿在捆着电源线的状态下使用。
- 否则可能导致触电或火灾。
请勿在电源开关开启的状态下远离。
请勿在电源开关开启的状态下远离。
- 否则可能导致火灾。
请勿在手湿的情况下将电源插头连接到家用电源
请勿在手湿的情况下将电源插头连接到家用电源
插座中，或从家用电源插座中拔出。
插座中，或从家用电源插座中拔出。
- 否则可能导致触电和受伤。
请勿在手湿的情况下使用。
请勿在手湿的情况下使用。
- 否则可能发生触电或由于短路而导致火灾。
请勿在石油气或其它易燃品（例如挥发剂、涂料
请勿在石油气或其它易燃品（例如挥发剂、涂料
稀释剂、喷雾剂等）附近使用。
稀释剂、喷雾剂等）附近使用。
- 否则可能导致爆炸或火灾。
请勿堵塞或将发卡等异物插入出风口、入风口和
请勿堵塞或将发卡等异物插入出风口、入风口和
nanoe
nanoe
TM
TM
（纳米水离子）发射口。
（纳米水离子）发射口。
- 否则可能导致烫伤、触电或火灾。
请勿放置或存放在靠近浴室、水槽、有水或其它
请勿放置或存放在靠近浴室、水槽、有水或其它
盛有液体、高度潮湿的地方。
盛有液体、高度潮湿的地方。
- 否则可能导致爆炸或火灾。
请勿在存放时将电源线缠绕在
请勿在存放时将电源线缠绕在
本体和手柄上。
本体和手柄上。
- 否则可能导致电源线断线，发
生烫伤、触电，或由于短路而
致火灾。
请勿存放在儿童和婴幼儿的接触范围之内。请勿
请勿存放在儿童和婴幼儿的接触范围之内。请勿
让儿童和婴幼儿玩耍。
让儿童和婴幼儿玩耍。
- 否则可能导致触电和受伤。

5
中文
警告
警告
请勿自行修理、拆卸或改装电吹风。
请勿自行修理、拆卸或改装电吹风。
- 否则可能因为起火或动作异常而导致受伤。
需要修理时，请联系客户咨询服务中心。
请勿将本电吹风浸泡在水中。
请勿将本电吹风浸泡在水中。
请勿在洗澡或淋浴时使用本电吹风。
请勿在洗澡或淋浴时使用本电吹风。
请勿在盛水的浴缸、淋浴器、洗脸盆或其它器皿
请勿在盛水的浴缸、淋浴器、洗脸盆或其它器皿
附近使用本电吹风。
附近使用本电吹风。
- 否则可能导致触电。
上记符号表示“禁止在洗澡或淋浴时使用”
上记符号表示“禁止在洗澡或淋浴时使用”
发生异常和故障时，请立即停止使用并拔下电源
发生异常和故障时，请立即停止使用并拔下电源
插头。
插头。
- 在这种情况下使用本产品可能会导致触电、受
伤或火灾。
﹤异常或故障的例子﹥
﹤异常或故障的例子﹥
·不出风。
·不出风。
·经常停止。
·经常停止。
·内部发红，有烟冒出。
·内部发红，有烟冒出。
- 请立即联系客户咨询服务中心。
进行清洁时，请务必从家用电源插座上拔出电源
进行清洁时，请务必从家用电源插座上拔出电源
插头。
插头。
- 否则可能导致触电或受伤。
定期清洁电源插头，防止灰尘积聚。
定期清洁电源插头，防止灰尘积聚。
- 否则可能因潮湿造成绝缘故障，从而引发火灾。
断开电源插头，然后用干布擦拭。
拔下电源插头时，请勿拉扯电源线，请务必握着
拔下电源插头时，请勿拉扯电源线，请务必握着
电源插头拔出。
电源插头拔出。
- 否则可能导致电源线断线，发生烫伤、触电，
或由于短路而导致火灾。
充分插入电源插头。
充分插入电源插头。
请务必使用
请务必使用
220 V
220 V ～
电压。
电压。
请单独使用插座，不要使用电源接线板。
请单独使用插座，不要使用电源接线板。
- 否则可能导致触电或火灾。
电吹风吹热风时，如果在出风口看见火花，请停
电吹风吹热风时，如果在出风口看见火花，请停
止使用，清除出风口和入风口附着的灰尘。
止使用，清除出风口和入风口附着的灰尘。
- 否则可能导致烫伤或火灾。
使用后请务必将电源开关设置为 [0] 档状态，将
使用后请务必将电源开关设置为 [0] 档状态，将
电源插头从插座上拔出。
电源插头从插座上拔出。
- 否则可能导致烫伤或火灾。
本器具必须安装固定在洗澡或淋浴时触及不到的
本器具必须安装固定在洗澡或淋浴时触及不到的
地方，并且器具的安装固定须保证手持部分在完
地方，并且器具的安装固定须保证手持部分在完
全拉直时，洗澡和淋浴时仍无法触及。
全拉直时，洗澡和淋浴时仍无法触及。
- 否则可能导致意外的发生或受伤。
为了保障您的安全，建议在浴室供电的电气回路
为了保障您的安全，建议在浴室供电的电气回路
中安装一个额定漏电动作电流不超过
中安装一个额定漏电动作电流不超过
30mA
30mA
的漏
的漏
电保护装置（
电保护装置（
RCD
RCD
），向
），向
RCD
RCD
安装商咨询。
安装商咨询。
- 否则可能导致意外的发生或受伤。
在浴室内使用后拔下插头，因为即使电吹风断电
在浴室内使用后拔下插头，因为即使电吹风断电
后，接近水仍存在危险。
后，接近水仍存在危险。
- 否则可能导致意外的发生或受伤。
如果电源软线损坏，为避免危险，必须由制造厂
如果电源软线损坏，为避免危险，必须由制造厂
或其维修部或类似的专职人员来更换。
或其维修部或类似的专职人员来更换。
- 否则可能导致意外的发生或受伤。
请妥善处理本产品的包装袋，使其远离婴幼儿。
请妥善处理本产品的包装袋，使其远离婴幼儿。
- 否则可能导致婴幼儿窒息等意外发生。

6
中文
警告
警告
本产品不宜供肢体、感官或精神上有残疾者、或
本产品不宜供肢体、感官或精神上有残疾者、或
缺乏经验和知识者（包括儿童）使用，必须有监
缺乏经验和知识者（包括儿童）使用，必须有监
护者从旁监督并对本产品的使用加以指导，且对
护者从旁监督并对本产品的使用加以指导，且对
使用者的安全能承担责任。
使用者的安全能承担责任。
- 否则可能导致意外的发生或受伤。
注意
注意
避免摔落电吹风或让电吹风受到强烈的撞击。
避免摔落电吹风或让电吹风受到强烈的撞击。
- 否则可能导致触电或火灾。
使用过程中，出风口和风嘴可能会变热，使用时
使用过程中，出风口和风嘴可能会变热，使用时
请勿用手触摸。
请勿用手触摸。
- 否则可能导致烫伤。
请勿在入风口破损或过滤网拆下的状态下使用。
请勿在入风口破损或过滤网拆下的状态下使用。
- 否则头发可能卷入入风口，导致头发受损。
请勿对婴幼儿使用。
请勿对婴幼儿使用。
- 否则可能造成烫伤。
电源线在扭曲的状态下请勿收纳。
电源线在扭曲的状态下请勿收纳。
- 否则可能导致电源线断线，发生烫伤、触电，或
由于短路而导致火灾。
请勿用水清洗进风网。
请勿用水清洗进风网。
- 否则可能导致触电或火灾。
请仅用于吹干头发和整发。请勿给宠物使用和用
请仅用于吹干头发和整发。请勿给宠物使用和用
来吹干鞋子和衣物等。
来吹干鞋子和衣物等。
- 否则可能导致烫伤或火灾。
入风口和头发之间请保持 10
入风口和头发之间请保持 10
厘米以上的距离。
厘米以上的距离。
- 否则可能会导致头发被吸
入电吹风内，从而导致受损。
10 厘米
3 厘米
出风口和头发之间请保持 3
出风口和头发之间请保持 3
厘米以上的距离。
厘米以上的距离。
- 否则可能导致头发的灼伤。
展开或折叠手柄时，请勿接触下图中的阴影部分。
展开或折叠手柄时，请勿接触下图中的阴影部分。
- 否则可能导致手指受伤。
不使用时请将电源插头从家用电源插座中拔出。
不使用时请将电源插头从家用电源插座中拔出。
- 否则可能由于绝缘劣化导致触电或火灾。
说明
说明
本电吹风自带过热保护装置，能在电吹风温度过高的时
候，自动切换成冷风。此时立刻关闭电源开关并从电源
插座上拔下插头，让它冷却几分钟后再使用。检查入风
口和出风口没有绒毛或头发时，再开启电源开关。

7
中文
部件名称
部件名称
A
B
CD
E
F
G
H
I
L
K
J
A
出风口
出风口 J
电源插头
电源插头
B
集风嘴
集风嘴 K
温度选择开关（
温度选择开关（
）
）
：热风档
：恒温档＊
：冷风档
C
nanoe
nanoe
TM
TM
（纳米水离子）
（纳米水离子）
发射口
发射口
D
nanoe
nanoe
TM
TM
（纳米水离子）
（纳米水离子）
指示灯
指示灯
＊注：根据 GB/T23106 标准
要求，在不带风嘴状态下
进行的测量。
E
入风口
入风口
F
nanoe
nanoe
TM
TM
（纳米水离子）
（纳米水离子）
开关
开关
： 开
： 关
L
电源开关（
电源开关（
）
2 ：强风档
1 ：柔风档
0 ：关
G
nanoe
nanoe
TM
TM
（纳米水离子）
（纳米水离子）
感应板
感应板
H
手柄
手柄
I
电源线
电源线
风嘴的安装和拆卸方法
风嘴的安装和拆卸方法
安装方法
安装方法
·将集风嘴对准本体出风口安装，直到听到“咔”一声，
说明风嘴已固定。
拆卸方法
拆卸方法
·将集风嘴从本体出风口处向下拧取，取下风嘴。
电吹风的基本使用方法
电吹风的基本使用方法
1在使用电吹风之前，请先确认电源开关设置在 [0] 档
在使用电吹风之前，请先确认电源开关设置在 [0] 档
位置，然后插入电源插头，并开启电源开关。
位置，然后插入电源插头，并开启电源开关。
·如想让风力更集中并易于打
造发型，请将集风嘴调整到
如右图所示。
2用nanoe
nanoe
TM
TM
（纳米水离子）开关选择是否使用
（纳米水离子）开关选择是否使用
nanoe
nanoe
TM
TM
（纳米水离子）。
（纳米水离子）。
·肉眼无法看见 nanoeTM（纳米水离
子）。
·使用过程中 nanoeTM（纳米水离子）
发射口可能会吹出水珠，这不是故
障。
·如不想让头发服帖（想让头发蓬松），
请将 nanoeTM（纳米水离子）开关切
换至 关的位置。

8
中文
3选择风力的温度。
选择风力的温度。
：热风档
：恒温档
：冷风档
·如果想使用冷风吹发，请将温度选择开关设置在
[冷风档 ]的位置。
·如果想将头发迅速吹干，请将温度选择开关设置在
[恒温档]或[
热风档 ] 的位置。
4选择风力的强度。
选择风力的强度。
2：强风档
1：柔风档
0：关
·电源开关设置在 [1柔风]或[
2强风 ] 的位置时，
且 nanoeTM（纳米水离子）开关切换至 时，
nanoeTM（纳米水离子）将会产生。
5用电吹风将头发吹干。
用电吹风将头发吹干。
·从头发根部吹起，可快速干发。
·如果您担心发质受损，请将
开关设置在 [ 恒温档 ]或
[冷风档 ]的位置。
·出风口和头发之间请保持 3 厘米以上的距离。
·入风口和头发之间请保持 10 厘米以上的距离。
· 当手握住 nanoeTM（纳米水离子）感应板时，有利于
更多的 nanoeTM（纳米水离子）持续渗透到发芯中补
充水分，滋润头发，使 nanoeTM（纳米水离子）效果
更加显著。
6将电源开关设置在 [
将电源开关设置在 [
0] 档的位置，然后从插座上拔出
] 档的位置，然后从插座上拔出
电源插头。
电源插头。
·待完全冷却后，请务必收纳在干燥的地方。
nanoe
nanoe
TM
TM
（纳米水离子）技术
（纳米水离子）技术
本电吹风用 nanoeTM（纳米水离子）来减少静电积聚，
让水分渗入发芯中滋润头发，同时还使头发略带酸性、
收紧毛鳞片，使头发更具健康光泽。
使用本电吹风时可能会闻到异味。这种异味对身体没有
任何危害。
·nanoeTM（纳米水离子）是由收集空气中的水分而产
生的，但在某些情况下由于环境不同，可能难以产生
nanoeTM（纳米水离子）
（在寒冷干燥的地方较难收集空气中的水分）
·注意：下述人不容易出现 nanoeTM（纳米水离子）的
效果
- 天然卷发的人
- 头发容易卷曲的人
- 发质本身很好，不易凌乱的人
- 负离子烫发未超过 3-4 个月的人
- 短发的人
电吹风的保养
电吹风的保养
请勿使用涂料稀释剂、苯、酒精等清洁产品。否则可能
导致本体发生故障、破裂和褪色。可使用肥皂水浸泡过
的布拧干后进行擦拭。
10 厘米
3 厘米

9
中文
出风口和入风口的保养（每月 1 次以上）
出风口和入风口的保养（每月 1 次以上）
·清洁出风口时，请将温度选择开关设置为 [ 冷风档 ]，
将电源开关设置在 [2 强风档]或[1柔风档]，然后
边吹冷风，边用牙刷清除出风口上的附着物。当心灰
尘等会飘散。
·将电源开关设置在 [0] 的位置，在关闭电源开关的状
态下，将过滤网从电吹风上拆下，用牙刷或吸尘器清
除灰尘或头发等附着物。
1. 按住过滤网底部的扣位，将过滤网拉出。
过滤网
扣位
·用真空吸尘器清除过滤网外侧粘附的灰尘等。如果这
种方式无法清除灰尘，可用手指将灰尘等物从内侧的
细网格推向外侧的金属网格，然后小心地用牙刷将其
擦掉。
·用牙刷小心地擦掉过滤网内侧的灰尘等。
·用真空吸尘器或牙刷小心地清除入风口上粘附的灰尘
等。
＊用指甲用力擦可能会撕毁过滤网，因此，请使用牙刷。
2. 如图所示，按顺序将过滤网安装到电吹风上，直至听
到“咔嗒”声。
1
2
nanoe
nanoe
TM
TM
（纳米水离子）
（纳米水离子）
发射口的保养
发射口的保养
如果火花出现在 nanoeTM（纳米水离子）发射口内，则
可能是电极变脏，导致异常放电引起的。如果出现这种
情况，请尝试按照以下清洁方法清洁 nanoeTM（纳米水
离子）发射口内的部件。
·清洁前请关闭电源并拔下电源插头。
·nanoeTM（纳米水离子）发射口内有一根针，请用沾
湿的棉签轻轻擦拭（约 5次）该部件的尖端部分。
·我们建议您使用细棉签。虽然普通棉签也能使用，但
由于头部较粗，它们较难插入发射口。
·请勿用硬物清洁或触碰 nanoeTM（纳米水离子）发射
口内的部件，以免导致其变形，影响 nanoeTM（纳米
水离子）的发射及产生危险。
轻柔地擦拭针部的顶端
棉签
nanoeTM（纳米水
离子）发射口

10
中文
故障排除
故障排除
故障
故障
可能的原因
可能的原因
纠正措施
纠正措施
热风运行过程中，时常会伴有
冷风，甚至还会出现火花。（火
花是由于作为保护装置的热开
关的动作导致，不是故障。）
·灰尘等堵塞进风口和出风口时，热敏开关将会启
动，启动时常常会吹出冷风。
·入风口被头发、手等堵住。
· 将堆积的灰尘除
去。（方法参照
P9）
·不要堵住入风口。
电源插头异常过热。
产品所连接的插座可能松动。 请使用没有松动的
插座。
产品运行过程中，时而有风时
而无风。
电源线损坏。 请立即停止使用。
电源线异常过热。
nanoeTM（纳米水离子）的发
射口内部出现火花。
电极变脏导致异常。
请清洁
nanoe
nanoe
TM
TM
（纳
（纳
米水离子）
米水离子）发射口内
的部件。（方法参照
P9）
nanoeTM（纳米水离子）的发
射口内部发出异常杂音。
产品运行中不出风，并且内部
发红。
请立即停止使用。
使用过程中有异常声音和震动。
产品本体和手柄处异常过热。
产品本体和手柄处发生变形。
使用过程中有烧焦的气味。
如果按照以上方法还不能解决，请联系客户咨询服务中心。
如果按照以上方法还不能解决，请联系客户咨询服务中心。

11
中文
规格
规格
产品名称 电吹风
产品型号 EH-ANA3
额定电压 / 额定频率 220 V ～50 Hz
额定功率 1800 W
尺寸 232.0（宽）×89.0（深）
×228.0（高）毫米
附件 集风嘴
原产地 中国
生产日期 请见商品手柄上刻印
执行标准
中国国家
标准
GB4706.1 GB4706.15
GB4343.1 GB17625.1
企业标准 Q/SXWBMJ 7
本产品仅适合家庭使用。

12

13
English
Contents
Contents
Thank you for purchasing this Panasonic product.
Before operating this unit, please read these instructions completely and save them for future use.
Before operating this unit, please read these instructions completely and save them for future use.
Operating Instructions
(Household) Hair Dryer
Model No. EH-ANA3
Safety precautions
Safety precautions
...........................
...........................
14
14
Parts identification ..........................18
Installing or removing the nozzle.....18
How to use the hair dryer ................18
nanoe™ technology.........................20
Maintenance of the hair dryer..........20
Troubleshooting ...............................22
Specifications ..................................24

14
English
nanoe™ is a trademark of Panasonic Corporation.
nanoe™ is a trademark of Panasonic Corporation.
A nanoe™ is a nano-sized ion particle coated with water
A nanoe™ is a nano-sized ion particle coated with water
particles.
particles.
Safety precautions
Safety precautions
To reduce the risk of malfunction, electric shock, injury,
fire, loss of life, and damage to equipment or property,
always observe the following safety precautions.
Explanation of symbols
Explanation of symbols
The following symbols are used to classify and describe
the level of hazard, injury, and property damage caused
when the notation is disregarded and improper use is
performed.
WARNING
WARNING
Denotes a potential
hazard that could
result in serious injury
or death.
CAUTION
CAUTION Denotes a hazard
that could result in
minor injury.
The following symbols are used to classify and describe
the type of instructions to be observed.
This symbol is used to alert users to a
specific operating procedure that must not be
performed.
This symbol is used to alert users to a specific
operating procedure that must be followed in
order to operate the unit safely.
WARNING
WARNING
If the cord or the plug is damaged or gets hot,
If the cord or the plug is damaged or gets hot,
do not use it.
do not use it.
- Doing so may cause burning, electric shock, or
fire due to a short circuit.
If the plug fits loosely in a household outlet, do
If the plug fits loosely in a household outlet, do
not use it.
not use it.
- Doing so may cause burning, electric shock, or
fire due to a short circuit.
Do not damage or modify, or forcefully bend, pull
Do not damage or modify, or forcefully bend, pull
or twist the cord. Also, do not place anything heavy
or twist the cord. Also, do not place anything heavy
on or pinch the cord.
on or pinch the cord.
- Doing so may cause electric shock or fire due
to a short circuit.
Do not use the unit when the cord is tied.
Do not use the unit when the cord is tied.
- Doing so may cause electric shock or fire.
Do not leave the unit when the main switch is
Do not leave the unit when the main switch is
turned on.
turned on.
- Doing so may cause fire.
Do not connect or disconnect the plug to a
Do not connect or disconnect the plug to a
household outlet with a wet hand.
household outlet with a wet hand.
- Doing so may cause electric shock or injury.
Do not use the unit with a wet hand.
Do not use the unit with a wet hand.
- Doing so may cause electric shock or fire due
to a short circuit.

15
English
WARNING
WARNING
Do not use the unit near gas or other inflamma-
Do not use the unit near gas or other inflamma-
ble materials (such as benzine, paint thinner,
ble materials (such as benzine, paint thinner,
sprays, etc.).
sprays, etc.).
- Doing so may cause explosion or fire.
Do not block the air outlet, air inlet, or nanoe™
Do not block the air outlet, air inlet, or nanoe™
outlet, and do not insert any foreign object, such
outlet, and do not insert any foreign object, such
as hairpin, into the unit.
as hairpin, into the unit.
- Doing so may cause burning, electric shock, or
fire.
Do not place or store the unit at places adjacent
Do not place or store the unit at places adjacent
to the sink, water, or other highly humid places
to the sink, water, or other highly humid places
containing water.
containing water.
- Doing so may cause explosion or fire.
Do not wrap the cord around
Do not wrap the cord around
the main body and handle
the main body and handle
when storing.
when storing.
- Doing so may cause break-
age to the wire of the cord,
burning, electric shock, or fire
due to a short circuit.
Do not store within the reach of children or in-
Do not store within the reach of children or in-
fants. Do not let them use the hair dryer.
fants. Do not let them use the hair dryer.
- Doing so may cause electric shock or injury.
Do not repair, disassemble or modify the hair
Do not repair, disassemble or modify the hair
dryer by yourself.
dryer by yourself.
- Doing so may cause fire or injury due to
abnormal action. Contact a service center
authorized by Panasonic for repair when
necessary.
Do not immerse this hair dryer into water.
Do not immerse this hair dryer into water.
Do not use this hair dryer on bathing or shower.
Do not use this hair dryer on bathing or shower.
Do not use this hair dryer near bathtubs, show-
Do not use this hair dryer near bathtubs, show-
ers, basins or other vessels containing water.
ers, basins or other vessels containing water.
- Doing so may cause electric shock.
This symbol on the hair dryer means
This symbol on the hair dryer means
“Do not use it on bathing or shower.”
“Do not use it on bathing or shower.”
Immediately stop using the unit and remove the
Immediately stop using the unit and remove the
plug if there is an abnormality or failure.
plug if there is an abnormality or failure.
- Using the unit in such conditions may cause
electric shock, injury or fire.
<Abnormality or failure cases>
<Abnormality or failure cases>
· No air.
No air.
· Frequent stop.
Frequent stop.
· The interior gets red, and smoke comes out.
The interior gets red, and smoke comes out.
- Immediately contact a service center
authorized by Panasonic.
Always unplug the plug from a household outlet
Always unplug the plug from a household outlet
when cleaning.
when cleaning.
- Failure to do so may cause electric shock or
injury.
Regularly clean the plug to prevent dust from
Regularly clean the plug to prevent dust from
accumulating.
accumulating.
- Failure to do so may cause fire due to insula-
tion failure caused by humidity. Disconnect the
plug and wipe with a dry cloth.

16
English
WARNING
WARNING
Always unplug the unit by holding the plug in-
Always unplug the unit by holding the plug in-
stead of the cord.
stead of the cord.
- Failure to do so may cause breakage to the
wire of the cord, burning, electric shock, or fire
due to a short circuit.
Fully insert the plug.
Fully insert the plug.
Make sure to use only 220 V
Make sure to use only 220 V ～
voltage.
voltage.
Independently use a household outlet, and do
Independently use a household outlet, and do
not use extension cord.
not use extension cord.
- Failure to do so may cause electric shock or
fire.
When the hair dryer outputs hot air, if sparks
When the hair dryer outputs hot air, if sparks
appear at the air outlet, immediately stop using
appear at the air outlet, immediately stop using
it, and then clear away dust adhered to the air
it, and then clear away dust adhered to the air
outlet and air inlet.
outlet and air inlet.
- Failure to do so may cause burning or fire.
After use, always set the main switch to position
After use, always set the main switch to position
“0”, and unplug the unit from a household outlet.
“0”, and unplug the unit from a household outlet.
- Failure to do so may cause burning or fire.
This appliance must be installed and fixed at a
This appliance must be installed and fixed at a
position out of the reach when having a bath or
position out of the reach when having a bath or
shower. Also, the installation and fixation of the
shower. Also, the installation and fixation of the
appliance must ensure that the appliance is still
appliance must ensure that the appliance is still
out of reach on condition that the handle portion
out of reach on condition that the handle portion
is completely straightened when having a bath
is completely straightened when having a bath
or shower.
or shower.
- Failure to do so may cause an accident or
injury.
For additional protection, the installation of a
For additional protection, the installation of a
residual current device (RCD) having a rated
residual current device (RCD) having a rated
residual operating current not exceeding 30 mA
residual operating current not exceeding 30 mA
is advisable in the electrical circuit supplying the
is advisable in the electrical circuit supplying the
bathroom. Ask your installer for advice.
bathroom. Ask your installer for advice.
- Failure to do so may cause an accident or
injury.
When the hair dryer is used in a bathroom,
When the hair dryer is used in a bathroom,
unplug it after use since the proximity of water
unplug it after use since the proximity of water
presents a hazard even when the hair dryer is
presents a hazard even when the hair dryer is
switched off.
switched off.
- Failure to do so may cause an accident or
injury.
If the supply cord is damaged, it must be re-
If the supply cord is damaged, it must be re-
placed by the manufacturer, its service agent
placed by the manufacturer, its service agent
or similarly qualified persons in order to avoid a
or similarly qualified persons in order to avoid a
hazard.
hazard.
- Failure to do so may cause an accident or
injury.
Properly dispose of the package of the
Properly dispose of the package of the
appliance, keep the package away from infants.
appliance, keep the package away from infants.
- Failure to do so may cause suffocation of
infants from happening.
This appliance is not intended for use by
This appliance is not intended for use by
persons (including children) with reduced
persons (including children) with reduced
physical, sensory or mental capabilities, or lack
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have
of experience and knowledge, unless they have
been given supervision or instruction concerning
been given supervision or instruction concerning
use of the appliance by a person responsible for
use of the appliance by a person responsible for
their safety.
their safety.
- Failure to do so may cause an accident or
injury.

17
English
CAUTION
CAUTION
Do not drop or subject to shock.
Do not drop or subject to shock.
- Doing so may cause electric shock or fire.
During use, the air outlet and the nozzle may get
During use, the air outlet and the nozzle may get
hot. Do not touch them with your hand.
hot. Do not touch them with your hand.
- Doing so may cause burning.
Do not use the unit when the air inlet is
Do not use the unit when the air inlet is
damaged or the filter is removed.
damaged or the filter is removed.
- Doing so may cause injury of hair due to hair
drawn into the air inlet.
Do not use on the unit to children or infants.
Do not use on the unit to children or infants.
- Doing so may cause burning.
Do not store the unit when the cord is twisted.
Do not store the unit when the cord is twisted.
- Doing so may cause breakage to the wire of
the cord, burning, electric shock, or fire due to
a short circuit.
Do not clean the air inlet mesh with water.
Do not clean the air inlet mesh with water.
- Doing so may cause electric shock or fire.
Intended for drying your hair and making hair-
Intended for drying your hair and making hair-
styles only. Do not use on the unit to pets and
styles only. Do not use on the unit to pets and
dry shoes and clothes.
dry shoes and clothes.
- Failure to do so may cause burning or fire.
Keep a distance of over
Keep a distance of over
10 cm between the air inlet
10 cm between the air inlet
and your hair.
and your hair.
- Failure to do so may cause
your hair to be drawn
into the hair dryer and
therefore cause damage.
3 cm
10 cm
Keep a distance of over
Keep a distance of over
3 cm between the air outlet
3 cm between the air outlet
and your hair.
and your hair.
- Failure to do so may cause
burning to your hair.
When unfolding or folding the handle, do not
When unfolding or folding the handle, do not
touch the shaded area as shown in figures
touch the shaded area as shown in figures
below.
below.
- Failure to do so may cause finger injury.
Always unplug the plug from a household outlet
Always unplug the plug from a household outlet
when it is not in use.
when it is not in use.
- Failure to do so may cause electric shock or
fire due to insulation failure.
Notes
Notes
This hair dryer is equipped with an automatic over-
heating protective device. If the hair dryer overheats,
it will switch to cool air mode. Switch off the hair dryer
and unplug it from the household outlet. Allow it to cool
down for a few minutes before using it again. Check
that no fluff, hair etc. is in the air inlets and outlets
before switching it on again.

18
English
Parts identification
Parts identification
A
B
CD
E
F
G
H
I
L
K
J
A
Air outlet
Air outlet J
Plug
Plug
B
Set nozzle
Set nozzle K
Temperature selector
Temperature selector
(
(
)
)
: Hot air
: Healthy air*
: Cool air
C
nanoe™ outlet
nanoe™ outlet
D
nanoe™ lamp
nanoe™ lamp
E
Air inlet
Air inlet *
Note: It is measured
without the nozzle
according to the
standard requirements of
GB/T23106.
F
nanoe™ switch
nanoe™ switch
: On
: Off
G
nanoe™ charge panel
nanoe™ charge panel L
Main switch (
Main switch (
)
2 : Dry (Strong airflow)
1 : Set (Gentle airflow)
0 : Off
H
Handle
Handle
I
Cord
Cord
Installing or removing the nozzle
Installing or removing the nozzle
To install
To install
·Align the set nozzle with the air outlet of the main
body to install it. When the nozzle has been fixed, a
click will be heard.
To remove
To remove
·Remove the set nozzle downward from the air outlet
of the main body.
How to use the hair dryer
How to use the hair dryer
1Before using the hair dryer, confirm that the main
Before using the hair dryer, confirm that the main
switch is set to “0”, plug the unit into a household
switch is set to “0”, plug the unit into a household
outlet, and then turn on the main switch.
outlet, and then turn on the main switch.
·If you want to concentrate
the airflow for easier hair
styling, adjust the set nozzle
as shown in the illustration.

19
English
2Set whether to have nanoe™ with the nanoe™
Set whether to have nanoe™ with the nanoe™
switch.
switch.
·nanoe™ is invisible to the naked
eye.
·Drops of water may blow out of the
nanoe™ outlet during use, but this
is not a malfunction.
·If you want your hair to have more
volume, set the nanoe™ switch to
“ Off”.
3Select the air temperature.
Select the air temperature.
: Hot air
: Healthy air
: Cool air
·If you want to dry your hair with cool air, set the
temperature selection switch to position “ Cool air”.
·If you want to dry your hair quickly, set the
temperature selection switch to position “ Healthy
air” or “ Hot air”.
4Select the wind power.
Select the wind power.
2: Dry (Strong airflow)
1: Set (Gentle airflow)
0: Off
·nanoe™ will be generated while the main switch
is in the “1 Set (Gentle airflow)” or “2 Dry (Strong
airflow)” position and the nanoe™ switch is set to
“On”.
5Dry your hair with the hair
Dry your hair with the hair
dryer.
dryer.
·Blowing your hair at the roots
will dry it faster.
·If you are concerned that
your hair may be damaged,
please set the switch to
position “ Healthy air” or
“ Cool air”.
3 cm
10 cm
·Keep a distance of over 3 cm between the air outlet
and your hair.
·Keep a distance of over 10 cm between the air inlet
and your hair.
·By gripping the nanoe™ charge panel, more
nanoe™ can penetrate the hair with moisture and
improve the nanoe™ effect.
6Set the main switch to position “0”, and then unplug
Set the main switch to position “0”, and then unplug
the unit from the household outlet.
the unit from the household outlet.
·After the unit has completely cooled, store it at a dry
place.

20
English
nanoe™ technology
nanoe™ technology
The hair dryer uses nanoe™ to reduce electrostatic
accumulation and penetrate the hair with moisture.
Furthermore, it makes the hair slightly acidic, tightens
cuticles, and keeps your hair strong, elastic, and
healthy.
You may notice a characteristic odor when using this
hair dryer. This is not harmful to the human body.
·Since nanoe™ is generated by collecting water
in the air, it may be difficult to generate in certain
environment conditions.
(It is more difficult to collect water from the air when
it is cold and the humidity is low.)
·Note: The effect of nanoe™ is not so pronounced for
the following:
- Having original curl hair.
- Having hair to be furled easily.
- Having wonderful and tidy hair.
- Having hair straightening perm no more than
3-4 months.
- Having short hair.
Maintenance of the hair dryer
Maintenance of the hair dryer
Do not use paint thinner, benzene, alcohol, etc., to
clean the unit. Doing so may cause failure, cracking
or discoloration of the main body. Wipe with a cloth
soaked in soapy water and wrung tightly.
Maintenance of the air outlet and air inlet (once
Maintenance of the air outlet and air inlet (once
a month or more)
a month or more)
·To clean the air outlet, set the temperature selector
to " Cool air” and the main switch to “2 Dry (Strong
airflow)" or "1 Set (Gentle airflow)", and rake out
with a brush while cool air is blowing out. Be careful
of dust that may be blown out.
·To clean the filter, set the main switch to position “0”,
detach the filter from the hair dryer, and remove the
dust or hair using a toothbrush or vacuum cleaner.