Panasonic ERJ PA2 Series User manual

●ESD surge characteristics superior to standard metal film resistors
●High reliability : Metal glaze thick film resistive element and three layers of electrodes
●Suitable for both reflow and flow soldering
●High power 0.20 W : 0603 inch / 1608 mm size (ERJP03)
0.20 W : 0402 inch / 1005 mm size (ERJPA2)
0.33 W : 0603 inch / 1608 mm size (ERJPA3)
0.50 W : 0805 inch / 2012 mm size (ERJP06), 1210 inch / 3225 mm size (ERJP14)
0.66 W : 1206 inch / 3216 mm size (ERJP08)
●High precision, High voltage, High resistance value (ERJPM8)
: Limiting element voltage 500 V, Resistance tolerance ±1 %, TCR ±100 (x 10-6 / K)
●Reference standard
: IEC 60115-8，JIS C 5201-8，JEITA RC-2134C
●AEC-Q200 compliant
●RoHS compliant
■As for packaging methods, land pattern, soldering conditions and safety precautions,
please see data files.
Note : Please check the "Ratings" for the presence/absence of part numbers for combinations of the symbols below.
Code
Product code
Thick film
chip resistors
Code
PA2
Should a safety concern arise regarding this product, please be sure to contact us immediately.
D
F±1 ％
±5 ％
U
0603
Three digit type (±5 %),
Four digit type (±1 %, ±0.5 %)
Example:
222 : 2.2 KΩ
10R0 : 10 Ω
1002 : 10 KΩ
ERJP14
ERJPA3
ERJP03
ERJP06
ERJP08
ERJPM8
ERJPA2
P08
29-Sep-23
Code
X
P14
J
0402
PA3
P03
P06
PM8
1206
Tolerance
±0.5 ％
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
1210
V
Anti-Surge Thick Film Chip Resistors
Features
Explanation of part numbers
inch size Nominal resistance value
Part No.
Embossed carrier taping
4 mm pitch, 5,000 pcs
Punched carrier taping
4 mm pitch, 5,000 pcs
Punched carrier Ttaping
2 mm pitch, 10,000 pcs
Packaging
Packaging methods
0805
ERJ P, PA,PM type
ERJ PA2, PA3, P03, P06, P08, PM8, P14
series
Resistance tolerance
1
2
3
4
5
6
7
8
9
10
11
12
ER J P 0 6 D 1 0 0 2V

Anti-Surge Thick Film Chip Resistors
*1: Use it on the condition that the case temperature is below the upper category temperature.
*2: If there is a doubt whether the rated ambient temperature or the rated terminal part temperature is used, give priority to the
rated terminal part temperature.
*3: Rated Continuous Working Voltage (RCWV) shall be determined from RCWV=√Power Rating × Resistance Value,
or Limiting Element Voltage listed above, whichever less.
*4: Overload Test Voltage (OTV) shall be determined from OTV=Specified Magnification (refer to performance) × RCWV
or Maximum Overload Voltage listed above, whichever less.
±1 1.02M to 10M
(E24, E96) ±100
ERJP14
(1210) 0.50 70 -200 400
±0.5, ±1 10 to 1M
(E24, E96) ±100
±5 1 to 1M
(E24)
R<10Ω : –100 to +600
10Ω≤R : ±200
ERJPM8
(1206) 0.66 70 125 500 1000
ERJP08
(1206) 0.66 70 125 500 1000
±5 1 to 10M
(E24)
R<10Ω : –100 to +600
10Ω≤R : ±200
ERJP06
(0805) 0.50 70 115 400 600
10Ω≤R<33Ω
33Ω≤R
: –100 to +600
: ±300
: ±200
±0.5, ±1 : ±100
±5 : ±200
R<10Ω : -100 to +600
±0.5, ±1 10 to 1M
(E24, E96) ±100
0.20 70 -150 200
0.33 -130
±1
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
29-Sep-23
Rated
terminal
part
temperature*2
(℃)
Limiting
element
voltage*3
(V)
Maximum
overload
voltage*4
(V)
Resistance
tolerance
(%)
Resistance
range
(Ω)
T.C.R.
(×10-6/Ｋ)
Category
temperature
range (℃)
AEC-
Q200
Grade
±0.5, ±1 10 to 1M
(E24, E96)
–55 to +155
Resistance value
expansion
: ±300
: ±100
10Ω≤R
ERJP03
(0603)
Ratings
Part No.
(inch size)
Power
rating*1
(W)
Rated
ambient
temperature*2
(℃)
ERJPA3
(0603)
ERJPA2
(0402)
0.25 105 -
150 200
±0.5, ±1 10 to 1M
(E24, E96)
±0.5, ±1
: ±100
±5 1 to 1.5M
(E24)
±5
: ±200
50 100
Grade 0
Grade 1
10 to 1M
(E24, E96) R<10Ω : –150 to +400
Resistance value
expansion
1 to 1M
(E24)
±0.5 10 to 1M
(E24, E96)
±5 1 to 1M
(E24)
: ±200
±0.5, ±1 10 to 1M
(E24, E96)
±5 1 to 1.5M
(E24)
±150
±0.5, ±1 10 to 1M
(E24, E96)
R<33Ω
33Ω≤R
±5 1 to 3.3M
(E24)
R<10Ω
0.20 70 -
0.25 -100
±5 1 to 1M
(E24)
±0.5, ±1 10 to 1M
(E24, E96)
±5

Anti-Surge Thick Film Chip Resistors
Power derating curve
・For resistors operated in ambient rated ambient temperature, power rating shall be derated in accordance
with the figure below.
In addition, please use under the condition that the product temperature is below the upper category
temperature.
※ When the temperature of ERJP14 is 155 ℃ or less, the derating start temperature can be
changed to 125 ℃. (See the dotted line)
・For resistors operated in ambient rated terminal part temperature, power rating shall be derated
in accordance with the figure below.
In addition, please use under the condition that the product temperature is below the upper category
temperature.
Ratings
Construction
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
29-Sep-23
-60 -20 020 60
40
80
100
80 100 140 180
-55 ℃70 ℃
0
105 ℃
-40 40 160120
60
20
125 ℃
ERJPA3
155 ℃
ERJPA2,P03,
P14
ERJP06,
P08,
PM8
Rated load (%)
Ambient temperature (℃)
Alumina substrate
Protective coating
Thick film resistive element Electrode (Outer)
Electrode (Inner)
ERJPA2
-60 -20 020 60 80 100 140 180-40 40 160120
40
80
100
0
60
20
100 ℃130 ℃-55 ℃
ERJPA3
155 ℃
-60 -20 020 60 80 100 140 180-40 40 160120
40
80
100
0
60
20
ERJP08
ERJPM8
-55 ℃115 ℃125 ℃
ERJP06 155 ℃
Rated load (%)
Terminal part temperature (℃)Terminal part temperature (℃)
Rated load (%)
Electrode (Middle)

Anti-Surge Thick Film Chip Resistors
Unit : mm
Anti-Surge Thick Film Chip Resistors (ERJP Series)
Thick Film Chip Resistors (ERJ Series)
サ
R
C
E
#
1.
10
±1ｋV
R
15
±3ｋV
※
This data is for reference purposes.
Please check with the actual equipment before use.
0.60±0.10
10
ERJP14
3.20±0.20
2.50±0.20
0.35±0.20
0.50±0.20
0.60±0.10
16
ERJP08,PM8
3.20+0.05/-0.20
1.60+0.05/-0.15
0.40±0.20
0.50±0.20
0.60±0.10
4
ERJPA3
1.60±0.15
0.80+0.15/-0.05
0.15+0.15/-0.10
0.25±0.10
0.45±0.10
ERJP06
2.00±0.20
1.25±0.10
0.25±0.20
0.40±0.20
Mass (Weight)
(Reference)
(g/1000 pcs)
0.35±0.05
0.8
ERJP03 1.60±0.15 0.80+0.15/-0.05 0.15+0.15/-0.10 0.30±0.15 0.45±0.10 2
ERJPA2
1.00±0.05
0.50±0.05
0.20±0.15
0.25±0.10
2
Part No.
Dimensions
L
W
a
b
T
R
1.5 kΩ
R=0 Ω (
≤
1.5 kΩ) / 150 Ω
＞
1.5 kΩ)
Size
(inch)
Dimensions (not to scale)
ESD Characteristic
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
29-Sep-23
C
100 pF
150 pF
E
±1 kV
±3 kV
0402 0603, 0805, 1206, 1210
ERJPA2 (0402 inch /1005 mm size)
ERJP06 (0805 inch / 2012 mm size)
ERJP14 (1210 inch / 3225 mm size)
ERJPA3, P03 (0603 inch /1608 mm size)
ERJP08, PM8 (1206 inch / 3216 mm size)
ERJPA3
ERJP03
ERJ3G
5
0
-5
-10
-15
-20
-25
-30
5
0
-5
-10
-15
-20
-25
-30
5
0
-5
-10
-15
-20
-25
-30
5
0
-5
-10
-15
-20
-25
-30
5
0
-5
-10
-15
-20
-25
-30
100 Ω10 Ω 1 kΩ 10 kΩ 1 MΩ
100 Ω10 Ω 1 kΩ 10 kΩ 1 MΩ
100 Ω
10 Ω
1 kΩ
10 kΩ
1 MΩ
100 Ω
10 Ω
1 kΩ
10 kΩ
1 MΩ
100 Ω10 Ω 1 kΩ 10 kΩ 1 MΩ
ERJPA2
ERJ2G
ERJP06
ERJ6G
ERJ8G
ERJP14
ERJ14
Change Ratio of Resistance Value (%)
Change Ratio of Resistance Value (%)
Change Ratio of Resistance Value (%)
Change Ratio of Resistance Value (%)
Change Ratio of Resistance Value (%)
100 kΩ
100 kΩ
100 kΩ
100 kΩ
100 kΩ
L
W
a
b
T
R
C
ESample
ERJP08
ERJPM8

Anti-Surge Thick Film Chip Resistors
Should a safety concern arise regarding this product, please be sure to contact us immediately.
29-Sep-23
Load life in
humidity 1
(Applicable to rated ambient
temperature-regulated products)
Load life in
humidity 2
(Applicable to rated ambient
temperature-regulated products)
Performance
Test conditions
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Performance requirements
⊿
R
D：±0.5 %, F, J：±1 %
±2 %
Only when it is ERJP03 (D),
P14 (D) : ±0.5 %
Within specified T. C. R.
Within specified tolerance
Durability at rated
ambient
temperature or rated
terminal part temperature
Test Item
Resistance
T. C. R.
Overload
Resistance to
soldering heat
Rapid change
of temperature
High temperature
exposure
Damp heat,
Steady state
±1 %
Rated ambient temperature or rated terminal part temperature,
Rated voltage, 1.5 h ON / 0.5 h OFF cycle, 1000 h
85 ℃, 85 %RH, Rated power 10％,
Continuously power, 1000 h
60 ℃, 90 % to 95 %RH, Rated voltage，
1.5 h ON / 0.5 h OFF cycle, 1000 h
60 ℃, 90 % to 95 %RH, 1000 h
+155 ℃, 1000 h
–55 ℃(30min.) / +155 ℃(ERJPA2 : +125 ℃) (30min.)，
100 cycles
±3 %
Only when it is ERJP03 (D),
P14 (D) : ±1 %
±3 %
±3 %
Only when it is ERJP03 (D),
P14 (D) : ±1 %
±1 %
±1 %
270 ℃, 10 s
+25
℃
/ +155
℃
(ERJPA2 : +125
℃
)
20 ℃
ERJP06
ERJPA2, ERJPA3, ERJP08, ERJPM8
ERJP03, ERJP14
: Rated voltag× 1.77, 5 s
: Rated voltag× 2.0, 5 s
: Rated voltag× 2.5, 5 s